• 한국보건간호학회지
• /
• 제15권2호
• /
• pp.239-248
• /
• 2001

The purpose of this study was to analyze risk factors for nosocomial pneumonia in patients admitted to NS ICU, and to provide a basic data to decrease respiratory nosocomial infection rate engendered from medical environments in NS ICU. The study site was the NS ICU at a university hospital located in Seoul, Korea. The subjects were 31 patients diagnosed with nosocomial pneumonia, who were selected from the initial list of 300 potential subjects who had been a) admitted between September 1999 and January 2000, and September 2000 and January 2001, b) resided at the NS ICU over 72 hours. The diagnostic standard of nosocomial pneumonia was based on the nosocomial infection guides of C university hospital. The data were analyzed using frequencies and logistic regression analysis. The sputums obtained from the subjects were cultivated and causal viruses were separated. The results were as follows: 1. The nosocomial pneumonia rate was $10.3\%$. There were 7 types of causal viruses separated from the sputum. and the most prevalent type of virus was MRSA as $62.2\%$. 2. The factors significantly influencing the incidence of nosocomial pneumonia included age, the residential duration at the NS ICU, GCS scores, diabetes mellitus, insertion of tracheal tube and its duration, tracheostomy and its length of insertion, the use of artificial ventilator and the length of its use, and the insertion of naso-gastic tube. The most significant risk factor among these was the insertion of tracheal tube (odds ratio=18.684. $95\%$ CI=6.849-50.974), followed by the use of tracheostomy (odds ratio=15.419, $95\%$ CI=6.615-35.942), the insertion of naso-gastric tube (odds ratio=14.875, $95\%$ CI=6.396-34.595), and the use of artificial ventilator (odds ratio=13.000. $95\%$ CI=5.633­30.001). 3. Regarding the use of the mechanical aids, the insertion of tracheal tube resulted in 12.968 times increase of the nosocomial pneumonia rate, and the use of artificial ventilator lead 6.714 times increase of the nosocomial pneumonia rate. One point increase of the GCS score resulted in the 1.210 times increase of the nosocomial pneumonia rate. For patients who had tracheal tube, tracheostomy, and artificial ventilator, one day increase of their residential duration at NS ICU lead 1.073 times increase of the nosocomial pneumonia rate. 4. In terms of duration of the mechanical aid usage, one day increase in the use of artificial ventilator engendered 1.080 times increase in the nosocomial pneumonia rate. One day increase of the residential duration at the NS ICU lead 1.604 times increase in the nosocomial pneumonia rate. As one point of the GCS score increased, 0.876 times decrease of the nosocomial pneumonia rate was reported. These study findings show that the risk factors significantly influencing the incidence of nosocomial pneumonia include the use of tracheal tube, tracheostomy, naso-gastic tube, and artificial ventilator. It is recommended that nurses working at NS ICU should pay more attention to the patients with these factors as the risky group for the nosocomial pneumonia, and thus make more active efforts to provide nosocomial pneumonia prevention strategies for them. In further studies patients admitted to the different types of ICUs such as internal medicine or surgery unit ICU will be also included, and more wide investigation of nosocomial pneumonia risk factors will be conducted through one-year longitudinal follow up.

• 대한치과교정학회지
• /
• 제41권5호
• /
• pp.354-360
• /
• 2011

Objective: To investigate the effects of different pilot-drilling methods on the biomechanical stability of self-tapping mini-implant systems at the time of placement in and removal from artificial bone blocks. Methods: Two types of artificial bone blocks (2-mm and 4-mm, 102-pounds per cubic foot [102-PCF] polyurethane foam layered over 100-mm, 40-PCF polyurethane foam) were custom-fabricated. Eight mini-implants were placed using the conventional motor-driven pilot-drilling method and another 8 mini-implants were placed using a novel manual pilot-drilling method (using a manual drill) within each of the 2-mm and 4-mm layered blocks. The maximum torque values at insertion and removal of the mini-implants were measured, and the total energy was calculated. The data were statistically analyzed using linear regression analysis. Results: The maximum insertion torque was similar regardless of block thickness or pilot-drilling method. Regardless of the pilot-drilling method, the maximum removal torque for the 4-mm block was statistically higher than that for the 2-mm block. For a given block, the total energy at both insertion and removal of the mini-implant for the manual pilot-drilling method were statistically higher than those for the motor-driven pilot-drilling method. Further, the total energies at removal for the 2-mm block was higher than that for the 4-mm block, but the energies at insertion were not influenced by the type of bone blocks. Conclusions: During the insertion and removal of mini-implants in artificial bone blocks, the effect of the manual pilot-drilling method on energy usage was similar to that of the conventional, motor-driven pilot-drilling method.

• 농업과학연구
• /
• 제34권1호
• /
• pp.61-65
• /
• 2007

본 연구에서는 유산양에서 비번식계절과 번식계절에 각각 발정동기화를 유도하여 인공수정을 1차와 2차에 걸쳐 실시한 후 분만율을 조사하였다. 자아넨 유산양 암컷을 대상으로 5월과 6월 사이에 CIDR-S를 이용하여 발정을 유도하였고, 액상정액과 동결정액을 이용하여 인공수정을 실시하였다. CIDR-S를 이용한 발정유도시험에서는 유산양의 발정동기화가 90%이상을 기록하여 아주 양호한 것으로 나타났다. 그러나 분만 성적은 1차 인공수정에 의해서는 25%, 2차 인공수정에 의해서는 20%로 낮하게 나타났으며, 자연종부에 의해서는 100%의 분만율을 기록하였다. 본 연구의 결과 비번식계절에서 번식주기를 인위적으로 조절할 수 있는 가능성과 정액을 주입하는 적정한 시기를 예측할 수 있는 점을 시사해 주었으나 인공수정 방법과 정액의 저장방법에 대한 연구가 필요한 것으로 나타났다.

• 현장농수산연구지
• /
• 제25권4호
• /
• pp.111-117
• /
• 2024

Reproductive research such as artificial insemination and embryo transfer is necessary to produce high-quality riding horses. In this study, we investigated the effects of estrus synchronization and ovulation induction methods, which can be considered the basis of artificial insemination in horses, on the hormone concentration and artificial insemination pregnancy rate of mares. For the purpose of synchronization of estrus in horses, Cidr-plus insertion method, Regumate feeding method, and 150mg progesterone + 10mg estradiol mixed administration method were used. In the Cidr-plus insertion method and the Regumate feeding method, the progesterone concentration reached the appropriate level for ovulation induction on the 8th day of administration. The mixed administration method of 150mg progesterone + 10mg estradiol maintained the progesterone concentration at an appropriate level immediately after administration. With the administration of PGF2a and hCG, progesterone concentration decreased rapidly, making ovulation induction possible. As a result of comparing the pregnancy rate between natural estrus and estrus synchronization, the pregnancy rate was found to be higher in estrus synchronization and ovulation induction. From the results of this study, it is insufficient to judge the effect of the pregnancy rate due to the small number of tests, but in terms of usability, estrus synchronization and ovulation induction were useful. Therefore, it is expected to contribute to improving the efficiency of future roadster production.

• Restorative Dentistry and Endodontics
• /
• 제1권1호
• /
• pp.34-38
• /
• 1975

Artificial canals were prepared by means of engine reamer on the slab which was made of clear acrylic resin. The shape of this canal is similar to the natural canal, the size is almost same as Kerr File No. 70, and the length is about 20mm. Sealer, Zine oxide eugenol mixture was prepared as matched to spatula test. Lentulo filler was inserted as deep as middle portion and apical one-third portion of the canal and the dental engine was driven in the speed of 1,000 and 3,000 r.p.m. in 30 seconds and 60 seconds with feeding of the sealer. The author measured the excess flow of the canal sealer from Lentulo end. Following are the results obtained from this study. 1. Lentulo insertion at the middle portion 1,000 r.p.m. in 30 seconds case: 0.21mm Same as above in 60 seconds: 0.20mm 2. Lentulo insertion at apical-thirds. 1,000 r.p.m. in 30 seconds: 0.22mm. Same as above in 60 seconds: 0.20mm. 3. Lentulo insertion at middle portion. 3,000 r.p.m. in 30 seconds: 0.14mm Same as above in 60 seconds: 0.25mm. 4. Lentulo insertion at apical-thirds, 3,000 r.p.m. in 30 seconds: 0.11mm Same as above in 60 seconds: 0.27mm.

• 대한치과교정학회지
• /
• 제37권1호통권120호
• /
• pp.5-15
• /
• 2007

본 연구는 스크류의 역학적인 특성을 알아보고자 세 종류의 self-drilling형의 교정용 미니 스크류 (Type A; 순수한 원통형, Type B; 내경이 증가하는 구간이 있는 부분적인 원통형, Type C; 원통형과 원추형이 함께 있는 복합형)를 피질골의 두께를 다르게 설정한 인공골 시편에 삽입하였다. 일정한 회전 속도와 수직력을 부여할 수 있는 구동식 토오크 시험기(Biomaterials Korea, Seoul, Korea)를 이용하여 삽입 토오크를 측정하고 만능시험기(Instron 3366, Instron, Norwood, MA, USA)를 이용하여 Pull-out 강도를 측정하여 다음과 같은 결과를 얻었다. 피질골 두께의 증가에 따른 최대 삽입 토오크(maximum insertion torque) 값은 Type A는 차이가 없는 반면(p > 0.05), Type B와 Type C에서는 유의한 증가가 관찰되었다 (p < 0.05). 모든 피질골 두께에서 Type C > Type A > Type B의 순으로 최대 삽입 토오크 값이 크게 나타났다 (p < 0.05). Pull-out 강도는 모든 경우에 Type A가 Type B와 Type C보다 낮게 측정되었다 (p < 0.05). Type별로 피질골 두께와 최대 삽입 토오크, Pull-out 강도 간에 통계적으로 유의한 상관관계가 있었다 (p < 0.05). 이상의 결과는 미니 스크류 식립을 위한 디자인 선택 시 식립부위의 피질골 두께를 고려해야 함을 시사한다.

• 한국해양공학회지
• /
• 제21권5호
• /
• pp.61-67
• /
• 2007

As part of the government's fishery resource creation policy, fishing ground creation projects have been undertaken in Korea's major seashore fishing spots since the 1970s, where artificial reefs constructed using new materials that make up for the weakness of concrete reefs have been used. In this study, the stability of these artificial reefs when acted upon by external forces, their ability to attract and gather fish, and their economic feasibility were examined. For this purpose, an experimental artificial steel reef was constructed and was installed in an area of the sea. Then the corrosion of the experimental material attached to it was investigated. The efficiency of the artificial steel reef was then verified by examining its functionality, removal, and burying, as well as the speed of insertion of living things into its structure and its ability to attract and gather fish.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권8호
• /
• pp.1100-1111
• /
• 2011

Two experiments under sham feeding conditions were conducted to determine whether or not ruminal distension brought about by feed boluses entering the rumen is a factor in the marked suppression of feed intake after 40 min of feeding. In experiment 1, a comparison was made between the intraruminal insertion of a water filled balloon (RIB) treatment and normal control (non-insertion of a balloon, NIB). In experiment 2, saliva lost due to sham feeding conditions was replenished via an intraruminal infusion of iso-osmotic artificial saliva. A comparison of dry forage intake was then conducted between the intraruminal replenishment of iso-osmotic artificial saliva and insertion of a balloon (RRIAS-RIB) treatment, and the intraruminal replenishment of iso-osmotic artificial saliva and non-insertion of a balloon (RRIAS-NIB) control. In experiment 1, eating rates in the RIB treatment 30 min after the commencement of feeding tended to be lower than those in the NIB control. In comparison with the NIB control, cumulative dry forage intake in the RIB treatment was 29.7% less (p<0.05) upon conclusion of the 2 h feeding period. The secreted saliva weight in the NIB control and the RIB treatment during the 2 h feeding period was 53.2% and 60.9% total weight of the boluses, respectively. In experiment 2, eating rates in the RRIAS-RIB treatment 30 min after the commencement of feeding was significantly lower (p<0.05) than those in the RRIAS-NIB control. Cumulative dry forage intake in the RRIAS-RIB treatment was a significant 45.5% less (p<0.05) compared with that in the RRIAS-NIB control upon conclusion of the 2 h feeding period. The secreted saliva weight in the RRIAS-NIB control and the RRIAS-RIB treatment during the 2 h feeding period was 54.1% and 64.2% total weight of the boluses, respectively. The level of decrease in dry forage intake in the RRIAS-RIB treatment of experiment 2 was larger than that in the RIB treatment of experiment 1. In the present experiments, due to the sham feeding conditions, the increases in osmolality of ruminal fluid and plasma, and a decrease in ruminal fluid pH which are normally associated with feeding were not observed. The results indicate that the marked decrease in feed intake observed in the second hour of the 2 h feeding period is related to ruminal distension caused by the feed consumed and the copious amount of saliva secreted during dry forage feeding.

• Journal of Periodontal and Implant Science
• /
• 제43권1호
• /
• pp.30-36
• /
• 2013

Purpose: Implant stability at the time of surgery is crucial for the long-term success of dental implants. Primary stability is considered of paramount importance to achieve osseointegration. The purpose of the present study was to investigate the correlation between the insertion torque and primary stability of dental implants using artificial bone blocks with different bone densities and compositions to mimic different circumstances that are encountered in routine daily clinical settings. Methods: In order to validate the objectives, various sized holes were made in bone blocks with different bone densities (#10, #20, #30, #40, and #50) using a surgical drill and insertion torque together with implant stability quotient (ISQ) values that were measured using the Osstell Mentor. The experimental groups under evaluation were subdivided into 5 subgroups according to the circumstances. Results: In group 1, the mean insertion torque and ISQ values increased as the density of the bone blocks increased. For group 2, the mean insertion torque values decreased as the final drill size expanded, but this was not the case for the ISQ values. The mean insertion torque values in group 3 increased with the thickness of the cortical bone, and the same was true for the ISQ values. For group 4, the mean insertion torque values increased as the cancellous bone density increased, but the correlation with the ISQ values was weak. Finally, in group 5, the mean insertion torque decreased as the final drill size increased, but the correlation with the ISQ value was weak. Conclusions: Within the limitations of the study, it was concluded that primary stability does not simply depend on the insertion torque, but also on the bone quality.

• 한국육종학회지
• /
• 제41권1호
• /
• pp.9-15
• /
• 2009

Recently, giant embryonic rice and functional rice food are preferred by more consumers, which are attributed to the fact that the embryo has high concentrations of essential amino acids, fatty acids, and vitamins relative to other parts of rice grains. In this report, the heredity and stability of giant embryo mutations in successive generations were analyzed regarding a giant embryonic line, 'P47', induced by T-DNA insertion and a $F_2$ population from a cross between 'P47' and 'Junam'. The mutant lines with increases of 1.5, 1.7 and 1.8 times on embryo length, width and 100-embryo weight to those of the control showed stable inheritance across three generations. The continuous frequency distributions of embryo size in the $F_2$ population showed that the embryo size is a quantitative trait of polygene controlled. In addition, wide range of transgressive segregations of six traits affecting embryo size confirmed exchange of genetic materials and recombination between genes controlling embryo size. Five giant embryo mutant lines selected from the $F_2$ population will be used for artificial selection and improvement of giant embryonic varieties.