• Journal of Korean Port Research
• /
• v.4 no.1
• /
• pp.21-31
• /
• 1990

The application of computer model to the port and harbor development is categorized in the field of port development policy, economic analysis and evaluation, civil engineering analysis, hydrodynamic analysis, evaluation of social and natural environment effect, etc. The study in this paper, however, is limited to hydrodynamic analysis, especially the analysis of water wave propagation and response to the shore structure due to the construction and implementation of shore boundary, the mathematical formulation of the numerical model is established systematically based on the hybrid Element Method and applied to solving the wave refraction, diffraction and radiation problems for a circular basin, the artificial beach or lagoon in terms of coastal zone development.

• Wind and Structures
• /
• v.6 no.6
• /
• pp.437-450
• /
• 2003

In this paper, the structural random response due to the turbulent boundary layer excitation is investigated. Using the mode shapes and natural frequencies of an undamped structural operator, a fully analytical model has been assembled. The auto and cross-spectral densities of kinematic quantities are so determined through exact analytical expansions. In order to reduce the computational costs associated with the needed number of modes, it has been tested an innovative methodology based on a scaling procedure. In fact, by using a reduced spatial domain and defining accordingly an augmented artificial damping, it is possible to get the same energy response with reduced computational costs. The item to be checked was the power spectral density of the displacement response for a flexural simply supported beam; the very simple structure was selected just to highlight the main characteristics of the technique. In principle, it can be applied successfully to any quantity derived from the modal operators. The criterion and the rule of scaling the domain are also presented, investigated and discussed. The obtained results are encouraging and they allow thinking successfully to the definition of procedure that could represent a bridge between modal and energy methods.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2007.11a
• /
• pp.216-219
• /
• 2007

New paradigm of modern society today - environmentally sound and sustainable development - led to the attempt on the introduction of natural elements in various spaces by people's interest in the quality of life. As one of the distinguished space marketing in designing the outer space of resort, this plan attempts to limit artificial boundary within open scenery, thus creating nature within nature - interior theme garden. In addition, this plan is aimed to obtain location property of inner garden through limited boundary, to promote the identity of resort by endowing it with new values in space and to form emotion care garden and culture garden for users. The plan has proceeded under the following concepts. 1) Differentiation from outer space has been made by creating a theme garden with unique theme garden - landscape elements and an attempt have been made to increase the values of interior garden through the introduction of new species of plants and the state-of-the-art facilities. 2) Emotion care garden - The garden has been created to get emotion purified systematically within nature and let people take a rest and enjoy their spare time. 3) Culture garden - The garden has been planned where culture could be created through various experience activities as a space with education and entertainment by providing a variety of interesting elements.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2003.09a
• /
• pp.481-488
• /
• 2003

A fluid-structure-isolator interaction program was developed in this study. The behavior of liquid regions are simulated by the boundary element method, and then the technique of analyzing the free surface motion in time domain is developed by using the nonlinear free surface boundary condition(NFBC) and the condition of interface between the structure and the fluid. Structure regions are modeled by the finite element method. In order to construct the governing equation of the fluid structure interaction(FSI)problem in time domain, the finite elements for a structure and boundary elements for liquid are coupled using the equilibrium condition, the compatibility condition and NFBC. The isolator is simulated by equation proposedin 3D Basis Me. In order to verify the validity and the applicability of the developed fluid- structure -Isolator interaction program, The horizontal forced vibration analysis was performed. The applicability of the developed method is verified through the artificial seismic analysis of real size liquid storage tank.

• Journal of Climate Change Research
• /
• v.7 no.3
• /
• pp.357-371
• /
• 2016

Buildings in the city acts as a cause of distorted wind direction, wind speed, causing the stagnation of the air flow. In the recent trend of climate change can not but consider the temperature rise of the urbanization. This study was aimed to analyze the thermal comfort of planetary boundary layer in different artificial constructions areas which has a direct impact on urban climate, and estimating the warming phenomena. Envi-met model was used to consider the urban structure associated with urban growth in order to precisely determine the impact of the building on the city weather condition. The analyzed values of thermal comfort index were temperature, wind speed, horizontal and vertical turbulent diffusivity. In particular, analysis of the PPD(Predicted Percentage of Dissatisfied) represents the human thermal comfort. In this study, by adjusting the arrangement and proportion of the top floor building in the urban it was found that the inflow of the fresh air and cooling can be derived low PPD. Vertical heat flux amount of the city caused by climate change was a factor to form a high potential temperature in the city and the accumulation of cold air does not appear near the surface. Based on this, to make the city effectively respond to climate change may require a long-term restructuring of urban spatial structure and density management.

• Journal of Environmental Science International
• /
• v.22 no.4
• /
• pp.397-406
• /
• 2013

With the methodology of AHP, this paper focuses on communication activities and their constituents in city parks, selecting 11 constituents, natural or artificial, and establishes an evaluation model on the basis of the analysis of the characteristics of tourists' communication activities in order to obtain the weight and order of importance of the constituents of communication activities space. First-grade indicators influence weight and the order of the constituents of communication activities space are: artificial constituents (0.6614) > natural constituents (0.3386). The weight and order of five secondary indicators attached to natural constituents: private space (0.1538) > shade tree (0.0955) > gentle slope mound (0.0474) > beautiful waterscape (0.0270) > sunshine lawn (0.0149); the weight and order of six secondary indicators attached to artificial constituents: field boundary (0.2865) > Leisure chairs (0.1843) > resting areas (0.0795) > appropriate square (0.0533) > tree-lined road (0.0352) > landscape sketch (0.0227).Using modern decision analysis methodology to research the relationship of environment constituent elements has great theoretical and practical significance for the scientific design and construction of suitable environment for human needs.

• Tunnel and Underground Space
• /
• v.3 no.1
• /
• pp.63-79
• /
• 1993

The design of tunnels in rock masses often demands more informations on geologic features and rock mass properties than acquired by usual field survey and laboratory testings. In practice, the situation that a perfect set of geological and mechanical input data is given to geomechanics design engineer is rare, while the engineers are asked to achieve a high level of reliability in their design products. This study presents an artificial neural network which is developed to resolve the difficulties encountered in conventional design techniques, particulary the problem of deteriorating the confidence of existing numerical techniques such as the finite element, boundary element and distinct element methods due to the incomplete adn vague input data. The neural network has inferring capabilities to identify the possible failure modes, support requirements and its timing for underground openings, from previous case histories. Use of the neural network has resulted in a better estimate of the correlation between systems of rock mass classifications such as the RMR and Q systems. A back propagation learning algorithm together with a multi-layer network structure is adopted to enhance the inferential accuracy and efficiency of the neural network. A series of experiments comparing the results of the neural network with the actual field observations are performed to demonstrate the abilities of the artificial neural network as a new tunnel design assistance system.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.5
• /
• pp.93-99
• /
• 2010

Nucleate pool boiling experiments with constant heat flux condition were performed using pure R113 for various channel heights under saturated pool condition. A circular heater of 1mm diameter, with artificial cavity in the center, fabricated using MEMS technique and the high-speed controller were used to maintain the constant heat flux. Images of bubble growth were taken at 5,000 frames per second using a high-speed CCD camera. The bubble geometry was obtained from the captured bubble images. The effects of channel height on the bubble growth behaviors were analyzed as dimensional scales for the initial and thermal growth regions. The parameters for the bubble growth behaviors were bubble radius, bubble growth rate, and bubble shapes. These phenomena require further analysis for various surface angles, but this study will provide good experimental data with constant heat flux boundary condition for such works.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.4
• /
• pp.7-14
• /
• 2009

Nucleate pool boiling experiments with constant heat flux condition were performed using pure R11 and R113 for various surface angles under saturated pool condition. A circular heater of 1 mm diameter, with artificial cavity in the center, fabricated using MEMS technique and the high-speed controller were used to maintain the constant heat flux. Images of bubble growth were taken at 5,000 frames per second using a high-speed CCD camera. The bubble geometry was obtained from the captured bubble images. The effects of surface angles on the bubble growth behaviors were analyzed as dimensional scales for the initial and thermal growth regions. The parameters for the bubble growth behaviors were bubble radius, bubble growth rate, sliding velocity, bubble shape and advancing and receding contact angles. These phenomena require further analysis for various surface angles, but this study will provide good experimental data with constant heat flux boundary condition for such works.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.4
• /
• pp.489-496
• /
• 2010

In this paper, a self-organization framework for swarm systems in three dimensions is presented. The framework uses artificial potential functions(APFs) to direct the robots toward the goal as well as to keep them in a swarm system. This research extends conventional APFs used for self-organizations in two dimension environment to three dimensions. In three dimension environment, the ground potential for the boundary surfaces that commonly appear in three dimension environments is proposed. Accordingly, the comparison between the paths without and with the ground potentials shows the necessity and effect of ground potentials. Extensive simulations are given to show the effectiveness of the extended potentials and various properties in three dimension environments.