• Journal of Mushroom
• /
• v.9 no.4
• /
• pp.145-154
• /
• 2011

Shiitake mushroom (Lentinula edodes) is usually cultivated on the oak log. Log cultivation of this mushroom is getting difficult to get oak logs and has a weak point of its long cultivation period. Recently sawdust cultivation is getting increase. It is important to make mycelia browning on the substrate surface. This browned surface in sawdust cultivation plays an important role like as artificial bark of the oak log, which protects the other pests and suppresses water evaporation in the substrate. The period for mycelia browning is so long that the sawdust cultivation of Shiitake mushroom can not spread well into the mushroom farms. The development of methods for the rapid mycelia browning is quite required. In this article we would like to find cultural characteristics of collected strains and to see the correlation with mycelial browning. Mycelial growth in the media was different according to kinds of media and strains. The optimal temperature on mycelial growth was $20-25^{\circ}C$. Browning patterns of mycelium under 200 Lux seemed to be used for a key to differentiate the strains for sawdust cultivation. Browning period was 30-40 days in the agar media and 70-100 days in the sawdust bag cultivation. When we considered the productivity and the other characteristics, ASI 3046 is the best for the bag cultivation. Significance between mycelial growth and browning was not accepted, but that of mycelial growth between on PDA and sawdust was accepted. Browning period on the PDA and sawdust showed a strong relationships. These results suggested that the browning habits could not be depend on the difference of media, but on their own properties. To select the strain showed fast browning can be done by using agar media for saving time.

• Journal of Genetic Medicine
• /
• v.4 no.2
• /
• pp.186-189
• /
• 2007

More than 6,000 rare disorders including genetic diseases have been reported. Of them, 1,500 diseases (1,211 for clinical diagnosis and 289 for research only) are technically possible for genetic testing. In Korea, since 2005, only 63 genetic diseases is permitted for prenatal genetic testing by the "Bioethics and Biosafety Law". The article 25 in the law prescribes 63 genetic diseases without clear indication for its selection and inclusion criteria. In EU, USA, and other foreign countries, however, there is no provision in the statute on prenatal genetic testing; it is not restricted by a law. Recently, a woman (Mrs. L, 38y) who is a carrier for Menkes disease made an appeal to a government for an amendment of the "Bioethics and Biosafety Law" prohibiting the prenatal diagnosis of her pregnancy at risk for Menkes disease. Menkes disease (MNK) is an X-linked recessive disorder characterized by neurodegeneration, connective tissue defects and hair abnormalities, and no effective treatment is available yet. The prevalence rate of MNK is one in about 250,000 live births. Menkes syndrome patients fail to absorb copper from the gastrointestinal tract in quantities adequate for meeting nutritional needs. These needs seem particularly acute during the initial 12 month of life, when the velocity of brain growth and motor neurodevelopment. Most of pts. die around 3yrs. of age. Mrs. L had a boy with Menkes disease who died at 2y.o. in 2001. Subsequent pregnancy in 2003, she was able to have prenatal genetic testing for mutation of the Menkes (ATP7A) gene and delivered a healthy baby boy. Now, She is pregnant again and wants to have prenatal diagnosis. however, this time, she was not allowed to have any more because Menkes disease is not included in 63 genetic diseases permitted by the law for prenatal genetic testing, in spite of the fact that she is a Menkes disease carrier and her pregnancy is at risk to have an affected baby. This case shows the practical problem of the legal restriction for prenatal genetic testing in Korea. In this study, we report a arguable case and discuss the controversial issues in the legal restriction for prenatal genetic testing in Korea.

• The Korean Journal of Air & Space Law and Policy
• /
• v.31 no.1
• /
• pp.145-167
• /
• 2016

UN Security Council is entitled to power for determining the existence of the threat to the peace. Specifying the provisions adopted in accordance with the chapter 7 of the UN Charter, its resolution is deemed as document confirming its decision about the threat to the peace. In general, resolutions adopted by the Security Council acting under Chapter VII of the Charter, are considered binding, in accordance with Article 25 of the Charter. Regarding to the terms of the Resolutions to be interpreted, the word "decide" is used as to the suspension of the ballistic missile program, the word "demand" is used as to the stopping of the the launch of ballistic missile, and the word "demand" is used as to return to the missile test moratorium. These provisions may be deemed to determining specific obligations to be imposed upon the States in accordance with the 1967 Outer Space Treaty. On the other hand, the Resolutions may be limited to the decision, not leading to a sort of international legislation, the main purpose of which is to provide a legal basis for international sanctions against Northe Korea. North Korea missile test case has reminded us of continuing discussion about whether the decision of the Security Council lacks the legislative authority due to its decision process. Furthermore, having regard to the outer space and space activities, the outer space law regime would be not compatible with the Security Council decision process in that the former presupposes the agreement among all States parties, while the latter based upon the agreement between Council member States. Therefore, it is premature to consider the Security Council decision as becoming the lex specialis of the space law regime.

• Asia pacific journal of information systems
• /
• v.19 no.2
• /
• pp.179-193
• /
• 2009

As the common saying attests, a publish-or-perish world, publishing is absolutely critical for academic researchers' successful careers. It is the most objectively-accepted academic performance criteria and the most viable way to attain public and academic recognition. Asia Pacific Journal of Information Systems(APJIS) has been recognized as the most influential domestic journal in Korean MIS field since July, 1991. Therefore, publishing in APJIS means your research is original, valid, and contributive. While most researchers learn how to publish an article in APJIS through a repetitive review process, thereby improving their chance of the' accepted' through their personal trial and error experiences, such valuable lessons and know-how tend to be kept personally and rarely shared. However, useful insights into research and publication skills could be also gained from sharing others' errors, neglect, and misjudgments which are equally critical in improving researchers' knowledge in the field (Murthy and Wiggins, 2002). For this reason, other academic disciplines make systematic efforts to examine the paper review process of major journals and share the findings from these studies with the rest of the research community members (Beyer et al., 1995; Cummings et al, 1985; Daft, 1995; Jauch and Wall, 1989; Murthy and Wiggins, 2002). Recognizing the urgent need to provide such type of information to MIS research community in Korea, we have chosen the most influential academic journal, APJIS with an intention to share the answer to the following research question: "What are the common problems found in the manuscripts either 'rejected' or 'required a major revision' by APJIS reviewers?" This study analyzes the review results of manuscripts submitted to APJIS (from January, 2006 to October, 2008), particularly those that were 'rejected' or required a 'major revision' at the first round. Based on Daft's(1995) study, twelve most-likelihood problems were defined and used to analyze the reviews. The twelve criteria for classification, or "twelve problems", are as follows: No theory, Concepts and operationalization not in alignment, Insufficient definition--theory, Insufficient rationale--design, Macrostructure--organization and flow, Amateur style and tone, Inadequate research design, Not relevant to the field, Overengineering, Conclusions not in alignment, Cutting up the data, and Poor editorial practice. Upon the approval of the editorial board of APJIS, the total 252 reviews, including 11 cases of 2005 and 241 cases from July, 2006 to October, 2008, were received without any information about manuscripts, authors, or reviewers. Eleven cases of 2005 were used in the pilot test because the data of 2005 were not in complete enumeration, and the 241 reviews (113 cases of 'rejection' and 128 ones of 'major revision') of 2006, 2007, and 2008 were examined in this study. Our findings show that insufficient rationale-design(20.25%), no theory(18.45%), and insufficient definition--theory(15.69%) were the three leading reasons of 'rejection' and 'major revision.' Between these two results, the former followed the same order of three major reasons as an overall analysis (insufficient rationale-design, no theory, and insufficient definition-theory), but the latter followed the order of insufficient rationale--design, insufficient definition--theory, and no theory. Using Daft's three major skills-- 'theory skills', 'design skills', and 'communication skills'-- twelve criteria were reclassified into 'theory problems', 'design problems', and 'communication problems' to derive more practical implications of our findings. Our findings show that 'theory problems' occupied 43.48%, 'design problems' were 30.86%, and 'communication problems' were 25.86%. In general, the APJIS reviewers weigh each of these three problem areas almost equally. Comparing to other disciplines like management field shown in Daft's study, the portion of 'design problems' and 'communication problems' are much higher in manuscripts submitted to the APJIS than in those of Administrative Science Quarterly and Academy of Management Journal even though 'theory problems' are the most predominant in both disciplines.

• Cartoon and Animation Studies
• /
• s.28
• /
• pp.235-263
• /
• 2012

Regarding the theme park business as an area of cultural content business, this study focuses on the trend of pursuing indoor theme parks as a small-scale small capital strategy escaped from the existing approach oriented to large-scale outdoor complex theme parks. It is because although existing large-scale outdoor complex theme parks require the capital with the scale of hundreds of billion won and also high-level technique and the latest operational know-how that they have a great barrier for new entry as well as enormous risk, the rent indoor theme parks succeed in market entry with efficient risk management and flexible market strategies. Thereupon, this study examines the current status of the children's indoor theme park market with Korean characters as their theme as a new market among the indoor theme parks and also investigates the market strategies of this market in the two aspects of expansion: the expansion of Korean characters' property value and the expansion of the local theme park market. For that, this article reviewed the advanced researches on theme parks and divided the types of theme parks existing in Korea with the criteria of classification by space and theme or classification by main users. Also, among the children's indoor theme parks with Korean characters as their theme, this study visited five ones located in the capital area to examine the current status. And about two located in the capital area and also four in the local area, the current data were received from the persons in charge of the companies for analysis. Also, with the subjects of spectators visiting the 'DIBO VILLAGE, Cheonggye-cheon' newly opened on April 25th, 2012, the research on satisfaction was conducted for analysis. Through that, this study analyzed the structure of the existing children's indoor theme park business with Korean characters as their theme and suggested the ground to analyze the effectiveness of market strategies being implemented. It is expected that this study will establish the clues of systematic and profound discussion for the indoor theme park business that can be said to be the niche market of the theme park business and allow the small-scale areal indoor theme parks to be examined as a significant business model for the local theme park industry. In the aspect of character business as well, it is expected that this will give a chance to establish a new model of spatial storytelling expansion in terms of the property value of Korean animation characters.

• Journal of Mushroom
• /
• v.7 no.3
• /
• pp.115-121
• /
• 2009

Recently sawdust cultivation of Shiitake mushroom (Lentinula edodes ) is getting increased because log cultivation is getting difficult to get oak logs. It is important to make mycelia browning on the substrate surface in sawdust cultivation. This browned surface plays an important role like as artificial bark of the oak log, which protects the other pests and suppresses water evaporation in the substrate. The period for mycelia browning is so long that the sawdust cultivation of Shiitake mushroom can not spread well into the mushroom farms. In this article we would like to discuss about the effect of environmental condition to the mycelial browning during sawdust bag cultivation for the To reduce the period required for browning of substrates, sawdust substrates was illuminated light with difference intensity. One hundred Lux light illumination was needed for producing normal yield of fruit body but fruit body yield was low and abnormally shaped fruit body was produced when cultured under the dark condition of incubation. Illumination over 200lux is necessary for the successful browning of substrates during incubation. Optimum incubation temperature for browning of substrates and fruiting was $25^{\circ}C$. The treatment of cotton plug with different size to identify the effect of aeration on the browning of substrates and fruiting showed rapid mycelial growth and reduced the periods for browning as the size of cotton plug was bigger. However, yield of fruit body was the highest at 16mm diameter cotton plug as compared to 20mm of that. $CO_2$ content in vessel of substrates was low as the size of cotton plug was bigger during incubation. $CO_2$ content during incubation of substrate was highest in periods between 8 week and 14 week after inoculation of shiitake when substrate was changed color into brown. $C_2H_4$ content in vessel with substrates was highest at 8mm diameter cotton plug and it was increased by order of 12, 16, 20, 0, 4 mm diameter cotton plug during substrate incubation. Sawdust substrate was soaked in cold water for different time to identify soaking effect of sawdust substrate on fruit body yield and activities of enzymes in these substrates were investigated. The fruit body yield was increased up to 40% by soaking substrates in comparison with unsoaked substrates. The soaked substrates showed 165, 175g/1,000ml at treatment of 4 and 15 hours, respectively. Cellulose activities in soaked substrates were not changed with soaking time, but activities of laccase, lignin degradation enzyme, were drastically increased up to 4 times in comparison with unsoaked substrates.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.6
• /
• pp.346-361
• /
• 2013

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2012. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. The conclusions are as follows : (1) The research works on thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and valves, fuel cells and power plants, ground-coupled heat pumps, and general heat and mass transfer systems. Research issues are mainly focused on new and renewable energy systems, such as fuel cells, ocean thermal energy conversion power plants, and ground-coupled heat pump systems. (2) Research works on the heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, and industrial heat exchangers. Researches on heat transfer characteristics included the results for natural convection in a square enclosure with two hot circular cylinders, non-uniform grooved tube considering tube expansion, single-tube annular baffle system, broadcasting LED light with ion wind generator, mechanical property and microstructure of SA213 P92 boiler pipe steel, and flat plate using multiple tripping wires. In the area of pool boiling and condensing heat transfer, researches on the design of a micro-channel heat exchanger for a heat pump, numerical simulation of a heat pump evaporator considering the pressure drop in the distributor and capillary tubes, critical heat flux on a thermoexcel-E enhanced surface, and the performance of a fin-and-tube condenser with non-uniform air distribution and different tube types were actively carried out. In the area of industrial heat exchangers, researches on a plate heat exchanger type dehumidifier, fin-tube heat exchanger, an electric circuit transient analogy model in a vertical closed loop ground heat exchanger, heat transfer characteristics of a double skin window for plant factory, a regenerative heat exchanger depending on its porous structure, and various types of plate heat exchangers were performed. (3) In the field of refrigeration, various studies were executed to improve refrigeration system performance, and to evaluate the applicability of alternative refrigerants and new components. Various topics were presented in the area of refrigeration cycle. Research issues mainly focused on the enhancement of the system performance. In the alternative refrigerant area, studies on CO2, R32/R152a mixture, and R1234yf were performed. Studies on the design and performance analysis of various compressors and evaporator were executed. (4) In building mechanical system research fields, twenty-nine studies were conducted to achieve effective design of mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, renewable energy systems, and lighting systems in buildings. New designs and performance tests using numerical methods and experiments provide useful information and key data, which can improve the energy efficiency of buildings. (5) In the fields of the architectural environment, studies for various purposes, such as indoor environment, building energy, and renewable energy were performed. In particular, building energy-related researches and renewable energy systems have been mainly studied, reflecting interests in global climate change, and efforts to reduce building energy consumption by government and architectural specialists. In addition, many researches have been conducted regarding indoor environments.

• Journal of Food Hygiene and Safety
• /
• v.29 no.4
• /
• pp.334-339
• /
• 2014

The purpose of our study was to investigate the migration level of lead (Pb), cadmium (Cd), antimony (Sb), arsenic (As), hexavalent chromium ($Cr^{6+}$) and mercury (Hg) from cookwares into food simulants and to evaluate the safety of each heavy metals. The test articles for heavy metals were glassware, ceramics, enamel, earthenware, polypropylene and polyethylene cookwares for Pb and Cd, enamel for Sb, earthenware for As, polyethylene and polypropylene cookwares for $Cr^{6+}$ and Hg. All the article samples of 391 intended for contact with foods were purchased in domestic markets. Pb, Cd, Sb and As were analyzed by Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), $Cr^{6+}$ by UV visible spectrophotometer and Hg by mercury analyzer. The migration levels of heavy metals in all the samples were within the migration limits of Ministry of Food and Drug Safety (MFDS). As a result of safety evaluation, our results showed that the estimated daily intakes (EDI, mg/kg bw/day) were $9.12{\times}10^{-6}$ and $8.83{\times}10^{-7}$ for Pb and Cd from ceramics and $1.19{\times}10^{-5}$, $1.23{\times}10^{-5}$ and $7.52{\times}10^{-6}$ for Pb, Cd and Sb from enamel. Tolerable daily intakes (TDI, mg/kg bw/day) were established respectively as 0.0036, 0.00081, 0.0021, and 0.0006 for Pb, Cd, As and Hg by JECFA (Joint FAO/WHO Expert Committee on Food Additives), as 0.0060 for Sb by WHO (World Health Organization). When comparing with TDIs, the EDIs accounted for 0.25% and 0.11% for Pb and Cd from ceramics and 0.33%, 1.52% and 0.13% for Pb, Cd and Sb from enamel.

• The Korean Journal of Archival Studies
• /
• no.12
• /
• pp.137-178
• /
• 2005

The anticommunist guerrillas' activities that aretheconcern of this article took place largely in North Korea or behind the enemy-held lines. Verifying their history is accordingly difficult and requires careful attention, but despite their active operations the military as well as the scholarly community have been lax in studying them. The Korean War came to be perceived as a traditional, limited war with regular battles, so that the studies addressed mostly the regular operations, and guerrilla warfare is remembered as an almost 'exclusive property' of the communist invaders; a small wonder that the anticommunist guerrillas have not been studied much and the collection of materials neglected. Therefore, in contrast with the witness accounts concerning regular battles, witness resources were of a small volume about these "patriots without the service numbers." For the above reasons the guerrilla participants and their later-organized fellowships took to the task of leaving records and compiling the histories of their units. They became active preservers of history in order to inform later generations of their works and also to secure deserved benefits from the government, in a world where none recognized their achievements. For instance, 4th Donkey Unit published witness accounts in addition to a unit history, and left video-recordings of guerrilla witnesses before any institute systematized the oral history of the guerrillas. In the case of Kyulsa ("Resolved to Die") Guerrilla Unit, the unit history was 10 times revised and expanded upon for publication, contributing substantially to the recovery of anticommunist guerrilla history which had almost totally lacked documented resources. Now because the guerrilla-related witness accounts were produced through fellowship societies and not individually, it often took the form of 'collective memory.' As a result, though thousands of former guerrillas remain surviving, the scarcity of numerous versions of, or perspectives upon, an event renders difficult an objective approach to the historical truth. Even requests to verify the service of a guerrilla member or to apply for decoration or government benefits for those killed in action, the process is taken care of not at the hands of the first party but the veteran society, so that a variety of opinions are not available for consideration. Moreover, some accounts were taken by American military personnel, and since some historians, unaware of official documents or evaluation of achievements, tended to center the records around their own units and especially to exaggerate the units' performances, they often featured factual errors. Thefollowing is the means to utilize positively the aforementioned type of witness accounts in military history research. It involves the active use of military historical detachments (MHD). As in the examples of those dispatched by the American forces during the Korean War, experts should be dispatched during, and not just after, wartimes. By considering and investigating the differences among various perspectives on the same historical event, even without extra documented resources it is possibleto arrive at theerrors or questionable points of the oral accounts, supplementing the additional accounts. Therefore any time lapses between witness accounts must be kept in consideration. Moreover when the oral accounts come from a group such as participants in the same guerrilla unit or operation, a standardized list of items ought to be put to use. Education in oral history is necessary not just for the training of experts. In America wherethefield sees much activity, it is used not only in college or graduate programs but also in elementary and lifetime educational processes. In comparison in our nation, and especially in historical disciplines, methodological insistence upon documented evidences prevails in the main, and in the fields of nationalist movement or modern history, oral accounts do not receive adequate attention. Like ancient documents and monuments, oral history also needs to be made a regular part of diverse resource materials at our academic institutes for history. Courses in memory and history, such as those in American colleges, are available possibilities.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.3
• /
• pp.112-131
• /
• 2011

This article reports the results of scientific analysis using SEM-EDX, XRD, TG/DTA, performed on 5 green glaze samples of the brick and roofing tile excavated from the Sacheonwang temple site in Gyeongju in order to verify the chemical compositions and melting temperature. The glaze samples on 2 clay statues have similar chemical composition (PbO 74~81%, $SiO_2$ 14~18%) and melting temperature range ($970{\sim}1070^{\circ}C$), whereas the 2 tiles of goblin's face and 1 rhomb brick have different characteristics. Sample SC 003 (made of PbO 63~67%, $SiO_2$ 25~28%), one of the tiles of goblin's face, shows low melting temperature range (below $970^{\circ}C$), and sample SC 004 (composed of PbO 64~70%, $SiO_2$ 19~25% and melting point $970{\sim}1070^{\circ}C$), the other tile of goblin's face, shows different chemical characteristics compared with 2 clay statues. The green glaze on rhomb brick shows different composition compared with all the others from Sacheonwang temple site in that it does not show any impurity elements other than the main components (PbO 87~88%, $SiO_2$ 12~13%) with very low melting temperature range ($750{\sim}770^{\circ}C$). Surprizingly, the chemical and optical characteristics of this green-glaze on rhomb brick are very similar to that on the bricks from Yeongmyo temple site, Gyeongju. The above results indicate that raw material and manufacturing method are not same for 5 green-glaze samples from Sacheonwang temple site and therefore suggests that further study on the provenance of raw material such as lead isotope analysis is necessary. Our work will provide basic data for future reproduction study of green glazed brick of Sacheonwang temple site, Gyeongju and will also serve as a reference data for the study of raw material and manufacturing method of green glaze from other sites of cultural assets.