• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1683-1696
• /
• 2018

Under the conventional control strategy, the asymmetry of arm impedances may result in the poor operating performance of modular multilevel converters (MMCs). For example, fundamental frequency oscillation and double frequency components may occur in the dc and ac sides, respectively; and submodule (SM) capacitor voltages among the arms may not be balanced. This study presents an enhanced control strategy to deal with these problems. A mathematical model of an MMC with asymmetric arm impedance is first established. The causes for the above phenomena are analyzed on the basis of the model. Subsequently, an enhanced current control with five integrated proportional integral resonant regulators is designed to protect the ac and dc terminal behavior of converters from asymmetric arm impedances. Furthermore, an enhanced capacitor voltage control is designed to balance the capacitor voltage among the arms with high efficiency and to decouple the ac side control, dc side control, and capacitor voltage balance control among the arms. The accuracy of the theoretical analysis and the effectiveness of the proposed enhanced control strategy are verified through simulation and experimental results.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.7
• /
• pp.671-676
• /
• 2007

In this paper, a novel neuro-fuzzy controller is presented. The generic fuzzy controller is compensated by a neural network controller so that an overall control structure forms a neuro-fuzzy controller. The proposed neuro-fuzzy controller solves the difficulty of selecting optimal fuzzy rules by providing the similar effect of modifying fuzzy rules simply by changing crisp input values. The performance of the proposed controller is tested by controlling humanoid robot arms. The humanoid robot arm is analyzed and implemented. Experimental studies have shown that the performance of the proposed controller is better than that of a PID controller and of a generic fuzzy PD controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1293-1296
• /
• 1997

We investigate a design methodology for master arm which is employed in remote-site control. Though counter-balancing has been employed for the purpose of lessening the actuator loads, it results in the increase of dynamic load at the task position. Therefore, there exist a trade-off between counter-balacing and dynamic performance. The concept of a composite index is introduced to simulataneously consider those two effects in the design of master arms. Several alternative designs of master arms are suggested.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.254-259
• /
• 1992

In this paper, we propose an optimal method for the tracking a trajectory of the end-effector of flexible robot arms with multiple joints. The proposed method finds joint trajectories and joint torques necessary to produce the desired end-effector motion of flexible manipulator. In inverse kinematics, optimized joint trajectories are computed from elastic equations. In inverse dynamics, joint torques are obtained from the joint equations by using the optimized joint trajectories. The equations of motion using finite element method and virtual work principle are employed. Optimal control is applied to optimize joint trajectories which are computed in inverse kinematics. The simulation of flexible planner manipulator is presented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.8
• /
• pp.688-695
• /
• 2005

This paper describes dynamic manipulability analysis of robotic arms moving in viscous fluid. The manipulability is a functionality of manipulator system in a given configuration under the limits of joint ability with respect to the task required to be performed. To investigate the manipulability of underwater robotic arms, a modeling and analysis method is presented. The dynamic equation of motion of underwater manipulator is derived based on the Lagrange-Euler equation considering with the hydrodynamic forces caused by added mass, buoyancy and hydraulic drag. The hydrodynamic drag term in the equation is established as analytical form using Denavit-Hartenberg (D-H) link coordination of manipulator. Two analytical approaches based oil manipulability ellipsoid are presented to visualize the manipulability of robotic arm moving in viscous fluid. The one is scaled ellipsoid which transforms the boundary of joint torque to acceleration boundary of end-effector by normalizing the torques in joint space, while the other is shifted ellipsoid which depicts total acceleration boundary of end-effector by shifting the ellipsoid as much as gravity and velocity dependent forces in work space. An analysis example of 2-link manipulator with proposed analysis scheme is presented to validate the method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.533-538
• /
• 1991

In the design and operation of robot arms with flexible links, the equations of motion are required to exactly model the interaction between rigid motion and elastic motion and to be formulated efficiently. Thus, the flexible link is represented on the basis of the D-H rigid link representation to measure the elastic deformation. The equations of motion of robot arms, which are configured by the generalized coordinates of elastic and rigid degrees of freedom, are formulated by using F.E.M. to model complex shaped links systematically and by eliminating elastic mode of higher order that does not largely affect motion to reduce the number of elastic degree of freedom. Finally, presented is the result of simulation to flexible robotic arm whose joints are controlled by direct or PD control,

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.7
• /
• pp.649-655
• /
• 2007

In this paper, a time-delayed controller for position control of humanoid robot arms is designed and implemented on a field programmable gate array(FPGA) chip. The time-delayed control algorithm is simple to implement, and robust to reject disturbances. The time-delayed control method uses the one sample time-delayed previous information to cancel out uncertainties in the system. Since the sampling time is so fast with the current hardware technology, the time-delayed controller can be implemented. However, inertia values should be correctly estimated to have the better performance. The position tracking tasks of humanoid robot arms are tested to compare performances of several control algorithms including the time-delayed controller.

• Journal of IKEEE
• /
• v.17 no.1
• /
• pp.44-50
• /
• 2013

This paper proposed the implementation of haptic-based robot which is following a human by using fundamental sensors on robot arms without additional sensors. Joints in the robot arms have several motors, and their angles can be read out by these motors when a human pushes or pulls the robot arms. So these arms can be used as haptic sensors. The implemented robot follows a human by interacting with robot arms and human hands, as a human follows a human by hands.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.987-992
• /
• 1988

In recent years there has been much interest in using light-weight, higher performance arms for both commercial and space-based applications, leading to the research of flexible robot manipulator. This paper is concerned with the trajectory control of a flexible arm using inverse dynamics. Inverse problems are important to robot control and programming, since they allow one to find the appropriate inputs necessary for producing the desired outputs. The input is obtained by the numerical inversion of Laplace transformation in the time domain. And we attempt the trajectory control experiment of a flexible arm using this calculated input. In this article we compare the numerical results with experimental results and can find good agreement. The results make clear that this technique has the good potential for the control of tip trajectory of flexible robot arms.

• Journal of Korean Physical Therapy Science
• /
• v.9 no.2
• /
• pp.7-16
• /
• 2002

This study was conducted to assess the changes in the functional levels of affected upper extremities after treating hemiplegic patients by applying constraint-induced movement therapy(CIMT). The subjects were selected from 20 hemiplegic patients with scores of 25 or more in Mini Mental State Examination(MMSE-k), transferred to the departments of physical therapy in two university hospitals in Busan from December, 2001 to march, 2002, and were divided into two groups. Eleven subjects with fixing unaffected arms by CIMT were assigned to the experimental patient group and the other 9 patients to control group without fixing unaffected arms. The function of upper arms for both groups were evaluated by using Actual Amount of Use Test(AAUT) and Motor Active Log(MAL) before and after physical therapy. The malts were as follows: The recovery rates of upper extremity by AOU(Activity of Use) and QOM(Quality of Movement) were 23.9% and 27.3% for CIMT treated group, and by 8.3% and 4.6% for the control group on the average, respectively, in AAUT after physical therapy, showing statistically significant differences between two groups. And in MAL, the average recovery rates were 27.3% by AOU and 22.6% by QOM for CIMT treated group while 3.1% by both AOU and QOM for the control group, and were significantly different between twogroups.