• Journal of Mechanical Science and Technology
• /
• 제16권5호
• /
• pp.732-742
• /
• 2002

This paper presents twin spray characteristics of two impinging F-O-O-F type injectors in which fuel and oxidizer impinge on each other to atomize under the various conditions. The droplet size and velocity in the impinging spray flow field were measured using PDPA. The droplet size and velocity were investigated at the mixture ratios of 1.5, 2.0, 2.47 and 3.0 for four injectors in which two single F-O-O-F injectors were arranged at the intervals of 20.8, 31.2, 41.6 and 62.4mm respectively. In general, the arithmetic mean diameter, SMD and standard deviation of droplet size in the interaction area (X=0 and Y=0mm) were smaller, while the axial velocity in the interaction area was slightly higher. An empirical correlation is obtained for the (D$\_$10/)$\_$D//(D$\_$10/)$\_$c/ value under the assumptions of two identical droplets and these with different size and velocity. The droplets with low Weber numbers below 40 have possibility to coalesce, while those over 40 tend to disintegrate after impingement in the interaction area.

• Nuclear Engineering and Technology
• /
• 제42권1호
• /
• pp.9-16
• /
• 2010

Experimental examinations for evaluating fracutres were conducted by using transparent replicas of a single fracture in order to obtain the fracture data to contribute to the methodlogy on how to improve the definitaion of representative parameter values used for a parallel plate fracture model. Quantitative aperture distribution and quantitative tracer concentration data at each point in time were obtained by measuring the attenuation of transmitted light through the fracture in high spatial resolution. the representative aperture values evaluated from the multiple different measurement methods, such as arithmetic mean of aperture distribution measured by the optical method, transport aperture evaluated from the tracer test, and average aperture evaluated from the fracture void volume measurement converged to a unique value that indicates the accuracy of this experimental study. The aperture data was employed for verifying the numerical simulation under the assuption of Local Cubic Law and showed that the calculated flow rate through the fracture is 10%-100% larger than hydraulic test results. The quantitative tracer concentration data is also very valuable for validating existing numerical code for advection dispersion transport in-plane heterogeneous fractures.

• 한국산업보건학회지
• /
• 제18권1호
• /
• pp.32-40
• /
• 2008

Methyl bromide has been used as a representative fumigant for quarantine, and several poisoning cases have occurred recently by this chemical in Korea. The purpose of this study is to evaluate workers' exposures to airborne methyl bromide in the importing and exporting plant products quarantine companies. Air samples were collected 400/200 mg Anasorb 747TM and were analyzed by gas chromatograph /flame ionization detector according to the Occupational Safety and Health Agency (OSHA) Method PV2040. Geometric mean (GM) and arithmetic mean (AM) of total 27 workers' exposure concentrations to airborne methyl bromide were 1.12 ppm and 0.24 ppm, respectively. Two exposures(12.1 ppm and 12 ppm as 8hr-TWA) of total 27 workers' exposures exceeded the Korean standard (5 ppm) of Ministry Labor, while 4 exposures (15%) exceeded the Threshold Limit Value (TLV) (1 ppm) of American Conference of Governmental Industrial Hygienists (ACGIH). Seven samples (11%) of total 63 short-term air samples exceeded the OSHA Permissible Exposure Limit (PEL) 20 ppm (Ceiling). The opening (management) task in wood fumigation by tent showed the highest short-term exposure concentrations (AM: 18.6 ppm, GM: 0.58 ppm, maximum: 340.7 ppm). The maximum level in treatment task of the same process was 2.01 ppm. Methyl bromide concentrations in opening operation was significantly higher than that in treatment operation (p<0.05). In conclusion, the GM of workers' 8hr-TWA exposures to airborne methyl chloride in the importing/exporting plant quarantine industry was estimated below the ACGIH TLV (1 ppm). However, opening task in the fumigation of wood being covered with tent or fumigation of pant products in container showed the levels exceeding ACGIH TLV (1 ppm), and opening task in the fumigation of wood being covered with tent showed the level exceeding the Korean standard of Ministry of Labor (5 ppm).

• 한국정보통신학회논문지
• /
• 제19권12호
• /
• pp.2924-2932
• /
• 2015

영상 이진화 기술은 객체와 배경을 분할하는 과정으로 영상 분석 및 인식 분야에 널리 적용되고 있다. 기존의 이진화 방법은 임계치를 설정하는 과정에서 객체와 배경의 명암 차이가 크지 않을 경우에 불확실성이 존재한다. 이러한 문제점을 개선한 퍼지 이진화는 객체의 특징을 효과적으로 이진화 하지만 ${\alpha}$-cut값을 정적으로 설정하기 때문에 객체의 특징들이 손실된 상태로 이진화 되는 문제점이 있다. 따라서 본 논문에서는 평균, 반복, Otsu 이진화 방법들의 임계치를 이용한 퍼지 소속 함수를 구하여 ${\alpha}$-cut값을 동적으로 설정하는 방법을 제안한다. 다양한 영상을 대상으로 실험한 결과, 제안된 방법은 기존의 이진화 방법 및 퍼지 이진화 방법보다 배경과 객체들의 손실이 적은 상태로 이진화된 것을 확인하였다.

• 한국대기환경학회지
• /
• 제18권2호
• /
• pp.113-126
• /
• 2002

This study was carried out to evaluate the temporal (daily, weekly, and seasonal) variations of volatile organic compounds (VOCs) concentrations at a road-side site in a heavy-traffic central area of Metropolitan Taegu. Ambient air sampling was undertaken continuously for 14 consecutive days in each of four seasons from the spring of 1999 to the winter of 2000. The VOC samples were collected using adsorbent tubes, and were determined by thermal desorption coupled with GC/MS analysis. A total of 10 aromatic VOCs of environmental concern were determined, including benzene, toluene, ethylbenzene, m＋p-xylenes, styrene, o-xylene, 1,3,5-trimethylbenzene, 1,2,4-trimethylbenzene, and naphthalene. Among 10 target VOCs, the most abundant compounds appeared to be toluene (1.5 ∼ 102 ppb) and xylenes (0.1 ∼ 114 ppb), while benzene levels were in the range of 0.3 ∼6 ppb. It was found that the general trends of VOC levels were significantly dependent on traffic conditions at the sampling site since VOC concentrations were at their maximum during rush hours (AM 7∼9 and PM 7 ∼9). However, some VOCs such as toluene, xylenes, and ethylbenzene were likely to be affected by a number of unknown sources other than vehicle exhaust, being attributed to the use of paints, and/or the evaporation of solvents used nearby the sampling site. In some instances, extremely high concentrations were found for these compounds, which can not be explained solely by the impact of vehicle exhaust. The results of this study may be useful for estimating the relative importance of different emission sources in large urban areas. Finally, it was suggested that the median value might be more desirable than the arithmetic mean as a representative value for the VOC data group, since the cumulative probability distribution (n=658) does not follow the normal distribution pattern.

• 한국산업보건학회지
• /
• 제25권2호
• /
• pp.146-155
• /
• 2015

Objectives: The aims of this study were to set up benzene exposure matrices according to industry and process and to assess the risk of those occupational exposure to benzene. Methods: The benzene exposure matrices were assembled depending on industry and process, based on an exposure database provided by KOSHA(the Korean Occupational Safety and Health Agency), which was gathered from a workplace hazards evaluation program in Korea. These exposure matrices were assessed by Hallmark Risk Assessment tool. Results: The benzene was treated 412 industries sector(36%), 2,747 business places, and 471 industrial processes according to database. The arithmetic mean of past decade 8 hours time-weighted average of airborne benzene concentrations in the workplace was 0.10722 ppm. 1.07% of the total sample were greater than OEL, and 59.8% were showed less than the limit of detection. The highest risk values(Danger Value) were seen 36 industries including manufacture of general paints and similar product and 12 processes, such as other painting of manufacture of metal fabricated members. Exposure matrices based on employee exposure data base may provide exposure histories and can be used in epidemiological studies. Conclusions: It was found that more attentions should be paid to 36 among 412 industries and 12 of 471 processes, with a higher risk value.

• 한국수자원학회논문집
• /
• 제37권11호
• /
• pp.959-967
• /
• 2004

충북 청주시에 위치한 충북대학교에서 강수에 따른 습성강하물 중의 TN, TP 및 COD의 농도와 오염부하를 조사하였다 강수사상에 대한 샘플은 1998년에서 2003년까지 채집되었다. 오염물질의 강수량가중평균 농도는 TN이 0.60mg/L, TP가 0.014mg/L, COD는 4.8mg/L이었는데, 이는 각각의 산술평균보다 26, 18, 14% 작게 나타났다. TN, TP 및 COD의 농도는 강수량이 증가함에 따라 감소하는 경향을 나타냈다. 모든 수질항목은 됨에 가장 많이 나타났는데, 이는 풍식 및 황사에 의한 먼지, 꽃가루 등 때문으로 생각된다. 습성강하물의 평균 연간부하는 TN 7.9kg/ha$\cdot$yr, TP 0.19kg/ha$\cdot$yr, COD 53.9ka/ha$\cdot$yr로 나타났는데, 이를 일본에서 보고된 각각의 연간부하와 비교하면 TN과 TP는 비슷했으나, COD는 약간 놀게 나타났다.

• 한국농공학회지
• /
• 제31권4호
• /
• pp.96-110
• /
• 1989

To suggest the fundamental data for the estimation of crop evaportranspiration by the ca- lculated coefficients for estimating the radiation suitable to the different regions of korea in application of Penman equcation, the daily data such as sc(skycover), n(actual sunshine hours), N(possible sunshine hours), Rs(horizontal solar radiation) and Ra(extraterrestial solar radiation) for 10 years (from 1977 to 1986) collected from 19 meteorological stations were analysed. The results are summarized as follows : 1. The coefficients a, b and c for estimating the radiation taken by the regression method with the daily and monthly mean data of the skycover and the ratio of Rs to Ra were shown as a=0.619, b= -0.0202, c= -0.0023 and a=0.64, b=0.0377 c=0.0001 in ave- rage respectively. 2. The coefficients a and b for estimating the radiation analysed by the regression and arithmetic method from the daily ratio of sunshine hours and Rs to Ra were shown as a= 0.157, b= 0.529, and a=0.119, b= 0.726 in average, respectively. 3. The coefficients a and b for estimating the radiation calculated by the regression me- thod based on the monthly ratio of sunshine hours and radiation were shown as a=0. 319 and b= 0.557 in average. 4. The values of a and b for estimating the radiation taken from the relationship between the daily ratio of sunshine hours and radiation showed high significance level. 5. The standard deviation and the coefficient of variance between the radiation calculated from the coefficients by the regression and arithmetic method with the daily data and the actual radiation were analysed and compared to the results by the coefficients of the modified Penman method (a=0.18, b=0.55) and by those of the F.A.O inodified Penman method(a=0.25, b=0.5). The standard deviation and the coefficient of varia- nce by the regression method in this study showed the lowest value. 6. From the above results, it is suggested that regression method using the coefficients taken from the relationship between the ratio of sunshine hours and the ratio of radia- tion based on the daily data has the highest accuracy in estimating the radiation. 7. The average reference crop evapotranspiration estimating by the modified Penman me- thod using the coefficients a and b derived by the regression method from the daily meterological data was closer to the actual evapotsranspiration of grass measured in Suwon area than the estimated evapotranspiration by the modified Penman method and the F.A.O modified Penman method.

• 한국정보통신학회논문지
• /
• 제17권2호
• /
• pp.438-446
• /
• 2013

본 논문에서는 컬러 영상에서 추정된 움직임 벡터를 이용하여 움직이는 객체와 움직이지 않는 객체로 영상을 분리하여 깊이 영상의 시간적 일관성을 보상하는 기법을 제안한다. 제안하는 기법에서는 광류(optical flow) 추정 기법을 이용하여 연속되는 컬러 영상의 움직임 벡터를 추정하고 초기 움직임 객체 영역을 생성한다. 이를 바탕으로 그랩컷(grabcut) 기법을 통해 움직임이 있는 객체와 움직임이 없는 객체 영역을 분리한다. 그리고 움직임이 없는 객체 영역의 깊이 값을 이전 프레임의 깊이 지도와 정합 창 기반 절대평균오차(sum of absolute differences)를 통해 비교하여 일정 임계값보다 클 경우 이전 프레임의 깊이 값으로 현재 프레임의 깊이 값을 대체함으로써 시간적 상관성을 보상한다. 움직임이 있는 객체 영역의 경우 시간 축으로 확장된 결합형 양방향 필터링을 수행하여 시간적 상관성을 보상한다. 제안하는 기법으로 보상된 깊이 지도를 이용하여 가상 시점을 합성할 시 화질 향상 뿐 아니라 최근 표준화가 진행 중인 HEVC에서도 부호화 효율 또한 증가한다는 것을 실험을 통하여 확인하였다.

• Safety and Health at Work
• /
• 제7권3호
• /
• pp.251-255
• /
• 2016

Background: Building demolition can lead to emission of dust into the environment. Exposure to silica dust may be considered as an important hazard in these sites. The objectives of this research were to determine the amount of workers' exposure to crystalline silica dust and assess the relative risk of silicosis and the excess lifetime risk of mortality from lung cancer in demolition workers. Methods: Four sites in the Tehran megacity region were selected. Silica dust was collected using the National Institute for Occupational Safety and Health method 7601 and determined spectrophotometrically. The Mannetje et al and Rice et al models were chosen to examine the rate of silicosis-related mortality and the excess lifetime risk of mortality from lung cancer, respectively. Results: The amount of demolition workers' exposure was in the range of $0.085-0.185mg/m^3$. The range of relative risk of silicosis related mortality was increased from 1 in the workers with the lowest exposure level to 22.64/1,000 in the employees with high exposure level. The range of the excess lifetime risk of mortality from lung cancer was in the range of 32-60/1,000 exposed workers. Conclusion: Geometric and arithmetic mean of exposure was higher than threshold limit value for silica dust in all demolition sites. The risk of silicosis mortality for many demolition workers was higher than 1/1,000 (unacceptable level of risk). Estimating the lifetime lung cancer mortality showed a higher risk of mortality from lung cancer in building demolition workers.