• Journal of Microbiology and Biotechnology
• /
• 제23권4호
• /
• pp.539-544
• /
• 2013

The effects of culture depth (2-10 cm) and cell density on the growth rate and biomass productivity of Chlorella sp. XQ-200419 were investigated through the use of a self-designed open circular pond photobioreactor-imitation system. With increases in culture depths from 2 to 10 cm, the growth rate decreased significantly from 1.08 /d to 0.39 /d. However, the biomass productivity only increased slightly from 8.41 to 11.22 $g/m^2/d$. The biomass productivity (11.08 $g/m^2/d$) achieved in 4 cm culture with an initial $OD_{540}$ of 0.95 was similar to that achieved in 10 cm culture with an initial $OD_{540}$ of 0.5. In addition, the duration of maximal areal productivity at a 4 cm depth was prolonged from 1 to 4 days, a finding that was also similar to that of the culture at a 10 cm depth. In both cases, the initial areal biomass densities were identical. Based on these results and previous studies, it can be concluded that the influence of culture depth and cell density on areal biomass productivity is actually due to different areal biomass densities. Under suitable conditions, there are a range of optimal biomass densities, and areal biomass productivity reaches its maximum when the biomass density is within these optimal ranges. Otherwise, biomass productivity will decrease. Therefore, a key factor for high biomass productivity is to maintain an optimal biomass density.

• Composites Research
• /
• 제31권6호
• /
• pp.323-331
• /
• 2018

스테인리스 강으로 제작된 요철핀의 보강이 복합재 모자형 체결부의 풀오프 강도에 미치는 영향을 시험으로 연구하였다. 요철핀에는 물리적, 화학적 표면처리를 수행하였고, 체결부의 외피와 보강재가 만나는 영역에 두께방향으로 핀을 삽입하였다. 모자형 체결부 시편은 요철핀을 포함하여 일체성형으로 제작하였다. 사용된 요철핀의 지름은 0.3, 0.5, 0.7 mm로 세 가지이다. 핀의 삽입밀도는 외피와 보강재가 만나는 면적 기준으로 0.5, 2.0% 두 가지이다. 요철핀과 일반핀의 효과를 비교하기 위하여 0.3 mm 일반핀을 2.0% 밀도로 삽입한 시편을 추가로 제작하여 시험을 수행하였다. 0.3, 0.5, 0.7 mm의 요철핀을 0.5%의 밀도로 삽입한 시편의 강도는 보강되지 않은 시편 대비 각각 45, 19, 9% 높게 나타났고, 2.0% 밀도의 경우 강도는 각각 127, 45, 11% 높게 나타났다. 시험 결과 지름이 동일할 경우 밀도가 높을수록, 밀도가 동일할 경우 지름이 작을수록 보강효과가 더 높게 나타나는 것을 알 수 있었다. 요철핀과 일반핀의 효과를 비교한 결과 2.0% 밀도로 0.3 mm 직경의 핀을 이용하여 보강할 경우, 요철핀 보강시편이 일반핀 보강 시편보다 64% 높은 강도를 보였다. 본 연구의 결과로부터 요철핀 보강이 복합재 모자형 체결부의 풀오프 강도 향상을 위한 효과적인 방법이 될 수 있음을 확인하였다.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.650-654
• /
• 1995

In digital video recording, higher areal density is strongly required for realizing digital VCRs. In order to accomplish higher areal density. we have implemented a system that has a narrow track pitch and can record data of about 30 Mbps(15 Mbps per channel) with the conventional S-VHS tapes. After computer simulation using the characteristics of the experimental system, we have selected appropriate equalizer and detection method by taking into account performance and cost (including hardware complexity). As a result, the selected equalizer and detection schemes are cosine equalizer and integrated de tection, respectively. The implemented system confirms reliable operation with a symbol error rate of less than $1{\times}10^{-4}$. In this paper, We will show the performance of the implemented system together with simulation results.

• Bulletin of the Korean Chemical Society
• /
• 제35권3호
• /
• pp.793-797
• /
• 2014

To develop a methodology for absolute determination of the surface areal density of functional groups on organic and bio thin films, medium energy ion scattering (MEIS) spectroscopy was utilized to provide references for calibration of X-ray photoelectron spectroscopy (XPS) or Fourier transformation-infrared (FT-IR) intensities. By using the MEIS, XPS, and FT-IR techniques, we were able to analyze the organic thin film of a Ru dye compound ($C_{58}H_{86}O_8N_8S_2Ru$), which consists of one Ru atom and various stoichiometric functional groups. From the MEIS analysis, the absolute surface areal density of Ru atoms (or Ru dye molecules) was determined. The surface areal densities of stoichiometric functional groups in the Ru dye compound were used as references for the calibration of XPS and FT-IR intensities for each functional group. The complementary use of MEIS, XPS, and FT-IR to determine the absolute surface areal density of functional groups on organic and bio thin films will be useful for more reliable development of applications based on organic thin films in areas such as flexible displays, solar cells, organic sensors, biomaterials, and biochips.

• 물과 미래
• /
• 제25권3호
• /
• pp.79-86
• /
• 1992

ARF(Areal Reduction Factor) have been developed and used to convert point I-D-F to areal I-D-F in many countries. In Korea, through ARF was calculated in Han river basin by several researchers, it has limit to apply to other regions \ulcorner 새 low density of rainfall gauge station and shortage of data. In this study ARF has developed in areas of high density of rainfall gauge station, Pyungchang river(han river), Wi stream(nakdong river), and Bochung stream(Guem river) basin by fixed-area method. And coefficient of variation of annual mean precipitation was presented to use ARF in othere areas and its applicability was analyzed.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권3호
• /
• pp.356-363
• /
• 2014

In this paper, we propose a new memristor-based crossbar array architecture, where a single memristor array and constant-term circuit are used to represent both plus-polarity and minus-polarity matrices. This is different from the previous crossbar array architecture which has two memristor arrays to represent plus-polarity and minus-polarity connection matrices, respectively. The proposed crossbar architecture is tested and verified to have the same performance with the previous crossbar architecture for applications of character recognition. For areal density, however, the proposed crossbar architecture is twice better than the previous architecture, because only single memristor array is used instead of two crossbar arrays. Moreover, the power consumption of the proposed architecture can be smaller by 48% than the previous one because the number of memristors in the proposed crossbar architecture is reduced to half compared to the previous crossbar architecture. From the high areal density and high energy efficiency, we can know that this newly proposed crossbar array architecture is very suitable to various applications of analog neuromorphic computing that demand high areal density and low energy consumption.

• Geomechanics and Engineering
• /
• 제16권1호
• /
• pp.21-34
• /
• 2018

Discontinuities considerably affect the mechanical and hydraulic properties of rock mass. These properties of the rock mass are influenced by the geometry of the discontinuities to a great extent. This paper aims to render an account of the geometrical parameters of several discontinuity sets related to the surrounding rock mass of Rudbar Lorestan Pumped Storage Power Plant powerhouse cavern making use of the linear and areal (circular and rectangular) sampling methods. Taking into consideration quite a large quantity of scanline and the window samplings used in this research, it was realized that the areal sampling methods are more time consuming and cost-effective than the linear methods. Having corrected the biases of the geometrical properties of the discontinuities, density (areal and volumetric) as well as the linear, areal and volumetric intensity accompanied by the other properties related to four sets of discontinuities were computed. There is an acceptable difference among the mean trace lengths measured using two linear and areal methods for the two joint sets. A 3D discrete fracture network generation code (3DFAM) has been developed to model the fracture network based on the mapped data. The code has been validated on the basis of numerous geometrical characteristics computed by use of the linear, areal sampling methods and volumetric method. Results of the linear sampling method have significant variations. So, the areal and volumetric methods are more efficient than the linear method and they are more appropriate for validation of 3D DFN (Discrete Fracture Network) codes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.237-242
• /
• 2000

The areal recording density of HDD(Hard Disk Drive) has been increasing by about 60% a year. In order to achieve high areal density, less track pitch is expected and more servo bandwidth is required. Dual stage actuator and servo controller for HDD have been suggested for achieving high track density as a possible solution. Dual-loop servo system is generally classified into a two-input-two-output system, but if we use an estimator for a two-input-two-output system, it can be converted into two input one output system. Since we can't control the dual stage servo system by the classical method, it requires a special technique; for example, Parallel Loop System, Master-Slave Loop System, Decoupled Master-Slave Loop System, and Dual Feedback Loop System. In this paper, we performed experimental evaluations of several types of control algorithm. Further experiments will be made in the future.

• 한국광학회지
• /
• 제12권1호
• /
• pp.61-66
• /
• 2001

두께가 얇은 기록매질을 사용하는 디스크형 홀로그래픽 메모리에서 비초점 Fourier aus 홀로그램을 저장할 때 홀로그램 당면적 저장밀도 및 기록 면에서의 빔세기분포 등을 조사하였다. 정확한 Fourier 면 홀로그램을 기록할때에는 2진 데이터를 표현하는 공간 광 변조기의 화소 피치가 클수록 면적 저장 밀도가 증가하지만, 비초점 Fourier 면 홀로그램을 저장할 때에는 면적 저장밀도를 최대로 하는 최적의 화소 피치가 존재함을 보였다. 일반적으로 홀로그램당 면적 저장밀도를 높이기 위해서는 데이터 영상을 집속하는 Fourier 변환 렌즈의 f/#가 가급적 작아야 한다. 이 경우 기록면에서의 빔세기 분포뿐만 아니라 기록면적이 비초점율에 따라 매우 민감하게 변하게 된다. 따라서 정확한 Fourier 면 홀로그램을 기록한다. 할지라도 최대의 면적 저장밀도를 얻기 위해서는 매질의 두께에 따른 비초점율의 영향을 고려해야 한다.

• 한국수자원학회논문집
• /
• 제33권4호
• /
• pp.419-426
• /
• 2000

한강유역의 면적 확률강우량을 산정하는데 있어서 자료기간이 충분하고 신뢰할 수 있는 지속기간별 연최대치 강우자료를 구축하는 것은 매우 중요하다. 현재 이를 만족하는 강우자료는 9개 기상청 자료이며, 면적 강우량을 산정하기에는 그 분포가 너무 적은게 사실이다. 이를 해결하기 위하여 건설교통부와 수자원공사 산하 강우관측소 자료 (59개소)의 공간적 상관관계를 이용하여 기상청 강우관측소의 관측소밀도를 보정하였으며, 회귀분석을 실시하여 소유역별 면적 확률강우량을 산정하였다.