• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.8
• /
• pp.188-195
• /
• 2004

In this paper we analyzed the mechanical behavior with respect to the thickness variation of elastic foundation(fatty tissue) in end-to-end anastomosis. This study considered the preliminary deformed shape induced by suturing in the anastomosis of coronary artery and PTFE with different diameters using simplified suturing model and the fatty tissue surrounding heart and coronary artery for more accurate result using finite element method. Area compliance(CA) was used to analyze the final deformed shape of the anastomotic part with respect to the thickness variation of fatty tissue under mean blood pressure, 100mmHg(13.3㎪). And Equivalent and circumferential stresses in the anastomosis were also analyzed with respect to the change of initial diameter ratio( $R_1$) and fatty tissue thickness( $T_{F}$). The results obtained were as follows : 1 When the elastic foundation, assumed to be incompressive material, surrounded the grafts in anastomosis, the compliance mismatch of artery and PTFE was reduced by 47 -72%. 2. As the initial diameter ratio( $R_1$) became larger, the higher difference of compliance was induced in spite of elastic foundation surrounding grafts. 3. The maximum nondimensional circumferential stress is twice or three times as high as the maximum nondimensional equivalent stress in the anastomotic part.t.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.5
• /
• pp.36-41
• /
• 1999

Although the problems of defects and nonmetallic inclusion in metal fatigue are very complicated it is particularly important to view these problems from the perspective that defects and inclusions are virtually equivalent to small cracks. This concept will help us to understand various fatigue phenomena caused by graphite of Ductile cast iron. Therefore in this study different ferrite-pearlite matrix structure and pheroidal ratio of graphite of 70%, 80% and 90% GCD40 , GCD45-2 series have been carried out rotary bending fatigue test estimated the maxi-mum size of graphite investigated correlation. It was concluded as follows : (1) in ductile cast iron which have various spheroidal ratio of graphite the fatigue limit C series of 90% spheroidal ratio of graphite is the highest. While A series of 70% spheroidal ratio of graphite is the lowest (2) fatigue limit was predicted by vickers hardness(Hv) of matrix {{{{ SQRT {area } }}}} of maximum size graphite inputting Murakami and Endo's formula.

• The Plant Pathology Journal
• /
• v.29 no.3
• /
• pp.344-349
• /
• 2013

Intraspecific variation in morphometry of pine wood nematodes Bursaphelenchus xylophilus and B. mucronatus in relation to geographical locations in South Korea was investigated using morphometric characters (body length, a, b and c ratio, stylet length, and spicule length for a male nematode and V (%) value for a female nematode). B. xylophilus was isolated from Pinus thunbergii in Jinju (1998), Ulsan (2000), Yangsan (2000), Mokpo (2001) and Jeju (2004), and from P. densiflora in Gumi (2001). B. mucronatus was isolated from P. thunbergii in Jinju (1991) and from P. densiflora in Milyang (2001). The body length of male and female B. xylophilus had the highest coefficient of variability and showed significant differences among geographical locations. The V (%) value for female B. xylophilus showed the lowest coefficient of variability, changing little with geographical area and host plant. All morphometric characters in B. mucronatus except for stylet length and female body length showed no significant differences between locations or hosts, suggesting they may not be affected by geographical area or host plant.

• Journal of Wetlands Research
• /
• v.13 no.3
• /
• pp.377-384
• /
• 2011

The objective of this research is to observe and to analyze how the precipitation change can affect urban area and coastal area to groundwater recharge. The variation in the precipitation data of the regional groundwater basin, which includes Busan Metropolitan City Suyeong Gu area, was to estimate the change in the groundwater recharge and to analyze the characteristic changes. Research result reflects that as the precipitation varied, there was some difference in the groundwater recharge. However, differences in the precipitation ratio and the groundwater recharge ratio were consistent. Variation in the precipitation had less impact on the groundwater recharge ratio, and the groundwater recharge ratio decreased as timeline increased. When the precipitation increased by 10 %, groundwater recharge changed by 2.23 %. Accordingly, when it decreased by 10 %, groundwater recharge changed by 2.20 %. When it increased by 20 %, groundwater recharge changed by 4.39 %, and when it decreased by 20 %, groundwater recharge changed by 4.36 %. Despite the dramatic changes in the precipitation, the changes in the groundwater recharge were minimal. From the research, we can observe that the precipitation change had a significant impact on the ratio, but it doesn't really affect the groundwater recharge. Therefore, in urban area, the changes in groundwater recharge don't conform to the changes in the precipitation, and the effect of direct runoff can increase the possible occurrence of urban flooding.

• Journal of Wetlands Research
• /
• v.16 no.1
• /
• pp.113-124
• /
• 2014

The observed rainfall may be different along with the altitude of rain gauge, resulting in the fact that the characteristics of rainfall events occurred in urban or mountainous areas are different. Due to the mountainous effects, in higher altitude, the uncertainty involved in the rainfall observation gets higher so that the density of rain gauges should be more dense. Basically, a methodology for the rain gauge network evaluation, considering this altitude effect of rain gauges can account for the mountainous effects and becomes an important step for forecasting flash flood and calibrating of the radar rainfall. For this reason, in this study, we suggest a methodology for rain gauge network evaluation with consideration of the rain gauge's altitude. To explore the density of rain gauges at each level of altitude, the Equal-Altitude-Ratio of the density of rain gauges, which is based on the fixed amount of elevation and the Equal-Area-Ratio of the density of rain gauges, which is based on the fixed amount of basin area are designed. After these two methods are applied to a real watershed, it is found that the Equal-Area-Ratio generates better results for evaluation of a rain gauge network with consideration of rain gauge's altitude than the Equal-Altitude-Ratio does. In addition, for comparison between the soundness of rain gauge networks in other watersheds, the Coefficient of Variation (CV) of the rain gauge density by the Equal-Area-Ratio is served as the index for the evenness of the distribution of the rain gauge's altitude. The suggested method is applied to the five large watersheds in Korea and it is found that rain gauges installed in a watershed having less value of the CV shows more evenly distributed than the ones in a watershed having higher value of the CV.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.6
• /
• pp.823-831
• /
• 1998

In order to investigate the impulsive noise at the exit of high-speed railway tunnel and the pressure transients inside the tunnel, numerical calculations using a Total Variation Dimishing difference scheme were applied to axisymmetric unsteady compressible flow field. Some compression wave forms were assumed to model the compression wave produced in real high-speed railway tunnel. The numerical data were extensively explored to analyze the peak over-pressure and maximum pressure gradient in the pressure wavefront. The effect of the distance and cross-sectional area ratio between two-continuous ducts on the characteristics of the pressure waves were investigated. The peak over-pressure inside the second duct decreases for the distance and cross-sectional area ratio between two tunnels to increase. The peak over-pressure and maximum pressure gradient of the pressure wavefront inside the second duct increase as the maximum pressure gradient of initial compression wave increases. The present results were qualitatively well agreed with the results of the previous shock tube experiment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.79-83
• /
• 1992

According to the variation of hydrostatic pressure on the central axis of deformable material, the V-shaped central bursting defect may be created on extrusion or drawing processes. The process factors whichaffect the generation of defects are die semi-angle, reduction ratio of cross-sectional area, friction factor, material properties and so on. The combination of these factors can determine the prossibility of defect creation and the shape of various round holes which have been created inside already. By the rigid plastic finite element method, this paper describes the observations of change in shape of a round hole with process conditions suchas die semi-angle, reduction ratio of cross-sectional area and friction factorat the unsteady state of axi-symmetrical extrusion process when the round hole is alreadyexisted inside the original billet, and also, the effects of process factors are investigated to prevent the possible defects.

• Journal of Powder Materials
• /
• v.16 no.6
• /
• pp.438-441
• /
• 2009

Mg-Cu composites were successively fabricated using a combination of rapid solidification and extrusion processes. In addition, the microstructural variation of the composite was investigated by performing the extrusion repeatedly. It resulted that the composite formed an uniform and dense structure by the extrusion, and the microstructure became fine as the extrusion conducted repeatedly. The microstructural variation was known to be dependent on the number of extrusion and the area reduction ratio. The tensile strength was also measured as a function of the microstructural variation.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.7
• /
• pp.51-58
• /
• 2002

In this paper, the characteristics of silicon wafer surface which is textured by KOH anisotropic etching method and mechanical polishing are investigated from the viewpoint of stiction and friction. It was found that the characteristics of stiction and friction of each textured surface are dependent on the contact area characterized by surface parameters such as bearing length ratio and peak count. To find the mechanism of the variation of stiction and friction in textured surface, OTS SAM coated wafer was used. In this case, the variation of stiction and friction was diminished, Therefore, it is concluded that the reason of variation of stiction and friction on textured surface is mainly caused by capillary which in turn is affected by the surface topography

• Journal of the Korean Institute of Rural Architecture
• /
• v.15 no.4
• /
• pp.25-34
• /
• 2013

The purpose of this study is to clarify the actual condition of the plan of middle schools in the rural area. Recently, many middle schools are remodeling the buildings and facilities based on the department system. This study, through analyzing on 3 remodeling cases of middle school in the rural area. This article discuses about the basic characteristics of the plan composition and the education programs of 3 middle schools. This study is showing the variation before and after remodeling and space organization types. The results of this study are summarized as follows; 1) Most of them take horizontal zoning system in the department classrooms. 2) Consideration is given to the space of homebas. 3) In the short term, if there is not enough classroom space utilization ratio should be adjusted in the classroom.