• 대한기계학회논문집B
• /
• 제39권8호
• /
• pp.645-651
• /
• 2015

본 논문은 중앙구동 이젝터의 유량비에 미치는 설계변수의 영향에 대한 연구를 목적으로 한다. 중앙구동 이젝터의 설계변수는 구동노즐 출구 단면적 및 거리비, 디퓨저 출구 단면적비로 설정하였다. 실험장치는 가변노즐 이젝터, 전동 모터-펌프, 구동유체 저장수조, 제어판넬 그리고 고속 카메라 시스템으로 구성하였다. 유량비는 실험변수에 따라 측정되는 유입 공기량과 구동유체인 물의 유량을 이용하여 도출하였다. 유량비는 구동노즐 거리비와 혼합관 길이비가 커지면 증가하는 반면에, 구동노즐 면적비와 디퓨저 출구 면적비가 커지면 감소하였다.

• 한국조경학회지
• /
• 제31권2호
• /
• pp.48-57
• /
• 2003

The objective of this study is to review and verify whether the functions and effect of roadside trees generally hewn in theory are actually realized in urban roads and how well they are performed if the function and effect are realized. The study was conducted with a focus on 3 functions and effects including roadside tree's urban landscape improvement function (green area visibility ratio), effect of introducing green area within a city, and urban green network building function. The major study results are as follows: First, the average green area visibility ratio of 41 study areas is currently about 25.90%. The green area visibility ratio of commercial area within downtown was lowest among 5 road types. It showed that it is possible to raise the average green area visibility ratio up to 32.49% through roadside tree management and additional plantation. Second, in a section between Paldal Mountain and Suwon City Hall where there is no forest fragments and parks at all, a green area of 4,826 roadside trees represented 2.4% of total area and served as the only linear green area. Third, an analysis of 15 cities in Kyonggi province showed that urban forests are concentrated in outskirts. The suey showed that because forest fragments and parks exist in a form of points in urban areas, roadside trees are the only green areas that link each other and build a network.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.521-528
• /
• 2002

This paper presents the results of centrifuge model tests on the reinforced slope by pressure grouting. Tests were performed to investigate the reinforcing effect of grouting. In the tests, slopes of scale factor 1/10 were used changing the space and number of reinforcing bar. Test results are as tile follows; 1. The reinforcing effect increase rapidly with reinforcement area ratio at low value of reinforcement area ratio. 2. At high reinforcement area ratio the increase ratio of reinforcing effect decrease. 3. At same reinforcement area ratio, the reinforcing effect of double reinforcing bar was larger than the single reinforcing bar due to arching effect.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.153-156
• /
• 2008

Comparative analysis of forest fire danger rating on the forest characteristics of thinning area and non-thinning area on forest fire burnt area was studied in this work. To investigate the effect of thinning slash in forest fire, Gangneung-si Wangsan-myeon, Ulgin-gun Wonnam-Myeon, Samchok-si Gagok-Myeon, in which forest fire broke out, were selected. As a result that investigated forest fire danger ratio between thinning slash and non-thinning slash, leeward scorching ratio(36%), crown damage ratio(29%), mortality of branch at the former are higher than those at the latter, leeward scorching ratio of tree, where thinning slash is around, is 10%-20% higher than that of independent tree. So I estimate that thinning slash has a some effect on the intensity of forest fire. And the result to investigate damage of forest fire according to tree species shows that leeward scorching ratio of conifer is 5% higher than that of non-conifer, and mortality of branch of the former is 19% higher than that of the latter. It is considered that forest fire may affect directly to a tree trunk if it diffuse to piled thinning tree because there was no space between thinning trees and trees. Furthermore, it was found that re-ignition had a chance to occur due to lots of piled thinning trees.

• 한국산학기술학회논문지
• /
• 제17권8호
• /
• pp.698-705
• /
• 2016

본 연구의 목적은 택지개발사업의 계획특성이 사업지구의 지가변동에 미치는 영향을 분석하여 택지개발사업의 효율적인 추진을 위한 정책적 시사점을 도출하는 것이다. 이를 위해 우선 청주시 택지개발사업 추진단계별 지가변동 규모와 양상을 분석하였다. 그리고 이론적 고찰 및 선행연구 검토를 통해 지가변동에 영향을 주는 택지개발사업의 계획특성 요소 16개((1)지가변동률, (2)사업구역 면적, (3)주거용지 비율, (4)상업용지 비율, (5)준주거용지 비율, (6)근린생활시설용지 비율, (7)공동주택 비율, (8)도로율, (9)공원 녹지율, (10)학교 비율, (11)$1m^2$당 조성비, (12)일반주거지역 비율, (13)준주거지역 비율, (14)상업지역 비율, (15)준공업지역 비율, (16)자연녹지지역 비율)를 선정하였다. 선정된 계획특성 요소 16개 중 지가변동에 영향을 미치는 요인을 분석하기 위하여 SPSS 20.0 Version을 이용하여 상관관계를 분석하였다. 지가변동의 양상을 분석한 결과, 지구가 지정되기 2년 전부터 지가가 상승되기 시작하였고 준공이후 지가상승이 안정화되는 것으로 분석되었다. 그리고 지가변동에 영향을 주는 계획특성 요소를 분석한 결과 (2)사업구역 면적, (4)상업용지 비율, (6)근린생활시설용지 비율, (8)도로율, (11)$1m^2$당 조성비, (12)일반주거지역 비율이 지가변동에 영향을 미치는 것으로 분석되었다.

• 한국해안해양공학회지
• /
• 제16권1호
• /
• pp.18-26
• /
• 2004

SCP공법(Sand Compaction Pile Method)은 안벽구조물 하부 지반이 연약할 경우에 압밀침하 속도를 증가시키고, 침하를 감소시키며, 지지력을 증대시키기 위하여 널리 적용되어 왔다. SCP 개량지반은 연약지반에 타설된 모래말뚝과 주변 연약지반으로 구성된 복합지반을 형성한다. 이와 같은 복합지반의 설계 및 해석 시 가장 중요한 요소는 치환율에 따른 응력분담비이다. 본 연구에서는 수치해석기법을 사용하여 복합지반에 대한 응력분담비 특성을 검토하였다. 치환율에 따른 응력분담비는 상수 값이 아니라 연약지반의 깊이, 압밀과정에 의존한다. 또한 하중재하 단계에 응력분담비는 복합지반의 응력전이 특성에 의하여 증가하며, 재하 완료 직후에는 치환율에 따라 2.5∼12의 값을 가진다. 그러나 과잉간극수압이 소산되어 점토지반의 유효응력이 증가되는 압밀과정 동안에는 감소하여 압밀 완료 후에는 치환율에 관계없이 2.5∼6정도 범위로 수렴한다.

• Journal of Korean Dental Science
• /
• 제10권2호
• /
• pp.53-59
• /
• 2017

Purpose: The objective of the present article is to determine whether there are differences in vertical enlargement ratio among various sites within both jaws in a panoramic radiograph. Materials and Methods: Two hundred and seventy-threeimplant sites in panoramic radiographs were evaluated by two observers. Magnification ratios at various sites in both jaws were calculated and compared with each other. Result: The average vertical enlargement ratio in the panoramic radiograph was 1.264 and this value was larger than original ratio 1.250. Although vertical magnification ratio of maxillary molar area was higher than that of mandibular molar area, every group showed similar magnification ratio in clinical respect. Conclusion: Vertical magnification ratio of the maxillary molar area is statistically higher than that of the mandibular molar area in the panoramic radiograph, but it is clinically negligible.

• 한국농공학회지
• /
• 제33권3호
• /
• pp.63-72
• /
• 1991

To investigate the status of repeated use of irrigation water observations of irrigation water were made on dry days during the irrigation periods in 1986 and 1987 crop year. The total area of studied site is 1,441 ha. The site is a major portion of Jedaecheon basin which is located in Bubuk-myeon, Miryang-gun, Gyeongnam Province. The studied area was subdivided into six small blocks. The inflow and outflow of daily irrigation water for these subdivided blocks were checked. Obtained results are as follows : 1. The over all possible ratio of the repeated use of irrigation water in studied area was 48.3%, which means that approximately one half of the surface flow was possible to be repeatedly used as irrigation water in this area. 2. The ratio of repeated use of irrigation water in sloppy paddy area was 4.29%, whereas, the ratio was 21.97% in the plain area. The average figure of this ratio over studied area was estimated as 17.43%.

• 상하수도학회지
• /
• 제18권6호
• /
• pp.748-757
• /
• 2004

In this study, we analyzed the sensitivity of parameters which affect the result of ILLUDAS model, in the various rainfall conditions. The three basins including Namgaja, Kings creek, Gray haven were selected for this research. The rainfall conditions are considered in terms of the rainfall frequency, the duration and the distribution. In most cases, the impermeability area ratio, the sewer slope, and the sewer roughness coefficient give more significant effects on the results than others. The results show that as increasing the rainfall frequency, the sensitivity of the parameters, sewer slope and roughness coefficient are rised, while the impermeability area ratio is decreasing. And also, for the duration of rainfall, the impermeability area ratio's sensitivity shows similar tendency. In case of the rainfall distribution, the parameters of the sewer roughness and the impermeability area ratio show more sensitive in Huff distribution. Especially, The impermeability area ratio is the most sensitive parameter in Central blocking and Yen & Chow distributions respectively.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.84-87
• /
• 2009

This paper describes a novel method for fabricating large area metallic stamp with high aspect ratio micro intaglio features. Micro machined brass master with pillar and larger width groove patterns were electroformed to form inverse structures on the large area metallic stamp. This enabled large area metallic stamp with fine micro high aspect ratio micro intaglio features which were small width groove patterns and quadrilateral hole patterns that cannot be fabricated by direct micro machining process. Fabricated large area metallic stamp with high aspect ratio micro intaglio features was measured and analyzed.