• 제목/요약/키워드: area reduction

검색결과 3,938건 처리시간 0.033초

Annual Greenhouse Gas Removal Estimates of Grassland Soil in Korea

  • Lee, Sang Hack;Park, Hyung Soo;Kim, Young-Jin;Kim, Won Ho;Sung, Jung Jong
    • 한국초지조사료학회지
    • /
    • 제35권3호
    • /
    • pp.251-256
    • /
    • 2015
  • The study was conducted to determine greenhouse gas (GHG) inventories in grasslands. After 'Low Carbon Green Growth' was declared a national vision on 2008, Medium-term greenhouse gas reduction was anticipated for 30% reduction compared to Business As Usual (BAU) by 2020. To achieve the reduction targets and prepare to enforce emissions trading (2015), national GHG inventories were measured based on the 1996 Intergovernmental Panel on Climate Change Guidelines (IPCC GL). The national Inventory Report (NIR) of Korea is published every year. Grassland sector measurement was officially added in 2014. GHG removal of grassland soil was measured from 1990 to 2012. Grassland area data of Korea was used for farmland area data in the "Cadastral Statistical Annual Report (1976~2012)". Annual grassland area corresponding to the soil classification was used "Soil classification and commentary in Korea (2011)". Grassland area was divided into 'Grassland remaining Grassland' and 'Land converted to Grassland'. The accumulated variation coefficient was assumed to be the same without time series changes in grassland remaining grassland. Therefore, GHG removal of soil carbon was calculated as zero (0) in grassland remaining grassland. Since the grassland area increases constantly, the grassland soil sinks constantly . However, the land converted to grassland area continued to decrease and GHG removal of soil carbon was reduced. In 2012 (127.35Gg $CO_2$), this removal decreased by 76% compared to 1990 (535.71 Gg $CO_2$). GHG sinks are only grasslands and woodlands. The GHG removaled in grasslands was very small, accounting for 0.2% of the total. However, the study provides value by identifying grasslands as GHG sinks along with forests.

STEPL WEB 모형을 이용한 농촌지역 비점오염원저감 대책 모의 (Simulation of the Best Management Practice Impacts on Nonpoint Source Pollutant Reduction in Agricultural Area using STEPL WEB Model)

  • 박윤식;금동혁;정영훈;조재필;임경재;김기성
    • 한국농공학회논문집
    • /
    • 제56권5호
    • /
    • pp.21-27
    • /
    • 2014
  • Sediment-laden water is problematic in aquatic ecosystem and for hydraulic structures in a watershed, and agriculture area in a watershed is one of source areas of nonpoint source (NPS), since soil surface typically exposures due to agricultural activities. Especially, severe sediment might flow into stream when agricultural area is located near stream like the Imha-dam watershed. Soil erosion is affected by precipitation, therefore there is a need to consider precipitation characteristics in soil erosion and best management practices (BMPs) simulation. The Web-based Spreadsheet Tool for the Estimation of Pollutant Load (STEPL WEB) allows estimating long-term sediment loads and the impact of best management practices to reduce sediment loads. STEPL WEB and predicted precipitation data by MIROC-ESM model was used to estimate sediment loads and its reduction by filter strip and conversion of agricultural area to forest in the future 30 years. The result indicates that approximately 70 % of agricultural area requires filter strip installation or that approximately 50 % of agricultural area needs to be converted to forest, for 41 % of sediment load reduction.

김제시 간척지역 천부 지하수내 철 환원작용 특성에 대한 고찰 (Characteristics of Fe Reduction Process of Shallow Groundwater in a Reclaimed Area, Kim-je)

  • 김지훈;정태진;류종식;김락현
    • 자원환경지질
    • /
    • 제46권1호
    • /
    • pp.39-50
    • /
    • 2013
  • 간척지를 포함하고 있는 연구지역에서 육지에서 해안지역으로 근접할수록 측정된 지하수의 산화환원 전위 (Eh)와 용존 산소량 (DO)은 낮게 관찰되었다 (Eh: 0.57 V ${\rightarrow}$ 0.13 V, DO; 9.7 mg/l ${\rightarrow}$ 1.3 mg/l). 이는 연구지역 지하수의 산화환경이 육지에서 해안가로 근접할수록 호기성 환경에서 아혐기성/혐기성 환경으로 변화한다는 것을 의미한다. 또한 지하수 수질 분석 결과에 의하면 철이온 (Fe)이 지하수에 많이 포함되어 있으며 (> 20 mg/l), 대부분의 2가 철로 존재한다. 이러한 연구지역 해안가 지하수들의 특징들은 지하수들이 철의 환원작용 (Fe reduction)이 일어날 수 있는 혐기성 환경에 위치하고 있음을 지시해준다. 철 환원작용이 일어나기 위해서는 3가 철의 공급원이 필요한데, 관측정 퇴적물의 철이온 추출실험에 의하면 연구지역의 퇴적물은 철 환원작용에 필요한 3가 철이온에 대한 충분한 공급원 역할을 할 수 있다. 따라서 분석한 지하수 및 퇴적물의 결과들을 종합해석하면, 연구지역에서 일어나는 철 환원작용은 갯벌의 간척활동과 많은 관련을 가지고 있는 것으로 추정된다.

도시유역 저류지 위치에 따른 우수유출저감효과 분석 (Analysis of Rainfall Runoff Reduction Effect Depending upon the Location of Detention Pond in Urban Area)

  • 이재준;김호년
    • 대한토목학회논문집
    • /
    • 제28권5B호
    • /
    • pp.535-546
    • /
    • 2008
  • 도시화는 유출량의 증가와 도달시간의 감소에 영향을 미치고 있으며, 이는 하류 지점의 빈번한 범람을 야기시키고 있다. 따라서 유역내에 침투시설과 저류시설 등 유출저감효과를 기대할 수 있는 여러 가지 시설을 이용하여 유출량을 저감시킬 수 있는 각종 규모의 지체저류시설을 활용하게 되었다. 본 연구에서는 세가지의 형태(세장형(SF=0.204), 집중형(SF=0.782), 중간형(SF=0.567))로 유역을 가정하여 일반적으로 유역 말단에 설치하던 유수지(저류지)를 유역내의 임의의 위치에 설치하여 단일저류지와 복수 저류지에 대해 각각 유출저감효과를 분석하고, 이들 저류지의 위치관련변수와 수문학적으로 분석하였다. 단일 저류지의 위치에 따른 유출저감효과를 분석하기 위해 유역의 형상에 따라 저류지의 위치는 전체 유역면적에 대한 저류지 상류부 면적의 비(이하 저류지 상류부 면적비, DUAR(Dimensionless Upstream Area Ratio)이라 한다)를 20%, 40%, 60%, 80%로 변동시키면서 모의분석을 수행하였으며, 복수 저류지의 위치에 따른 유출저감효과를 분석하기 위해 단일 저류지 분석시 적용한 유역형상 중 중간형 유역을 대상으로 하여 방류구조와 유역의 제반사항은 단일 저류지의 모의시와 동일하게 가정하였고, 저류지가 분담하는 유역의 면적비를 바탕으로 하여 DUAR 60%, 80%, 100%, 120%, 140%의 경우에 대해 분석하였다. 이 때 저류지 바닥면적(Ab)의 크기는 유역면적에 대해 각각 1%와 0.5%를 취하는 경우의 두 가지로 구분지어 모의분석을 실시하였다. 저류지의 위치에 따른 유출저감효과를 분석한 결과 세장형의 유역이 적은 저류량에 대해 유출저감효과가 우수하였으며, 저류지의 위치 관련변수의 관계도 및 관계식을 제시하였고, 이를 시험유역에 적용시켜 검증하였다. 저류지 위치 관련변수의 관계도 및 관계식을 이용하여 단일 저류지와 복수 저류지의 개략적인 위치선정 기준을 제안하였다.

식생체류지의 원지반 침투율이 유출량 저감효과에 미치는 영향모의 (The Effects of Infiltration Rate of Foundation Ground Under the Bioretention on the Runoff Reduction Efficiency)

  • 전지홍;정광욱
    • 한국물환경학회지
    • /
    • 제35권1호
    • /
    • pp.72-77
    • /
    • 2019
  • Soil type in LID infiltration practices plays a major role in runoff reduction efficacy. In this study, the effects of infiltration rate of foundation ground under bioretention on annual runoff reduction rate was evaluated using LIDMOD3 which is a simple excel based model for evaluating LID practices. A bioretention area of about 3.2 % was required to capture surface runoff from an impervious area for a 25.4 mm rainfall event. The relative error of runoff from bioretention using LIDMOD3 is 10 % less than that of SWMM5.1 for a total rainfall event of 257.1 mm during the period of Aug. 1 ~ 18, 2017, hence, the applicability of LIDMOD3 was confirmed. Annual runoff reduction rates for the period 2008 ~ 2017 were evaluated for various infiltration rates of foundation ground under the bioretention which ranged from 0.001 to 0.600 m/day and were converted to annual runoff reduction for hydrologic soil group. The runoff reduction rates within hydrologic soil group C and D were steeply increased through increased infiltration rate but not steep within hydrologic A and B with reduction rates ranging from 53 ~ 68 %. The estimated time required to completely empty a bioretention which has a storage depth of 0.632 m is 3.5 ~ 6.9 days and we could assume that the annual average of antecedent rainfall is longer than 3.5 ~ 6.9 days. Therefore, we recommended B type as the minimum hydrologic soil group installed LID infiltration practices for high runoff reduction rate.

입자 균등성 확보를 위한 시험 챔버의 유동 시뮬레이션 및 이를 이용한 기상 부유균 저감 특성의 실험적 연구 (Flow Simulation of Chamber System to Obtain Particle Uniformity and Study on Bio-aerosol Reduction Test)

  • 박대훈;현준호;황정호
    • 한국입자에어로졸학회지
    • /
    • 제10권2호
    • /
    • pp.83-91
    • /
    • 2014
  • Since airborne bacteria have been known to aggravate indoor air quality, studies on reducing bacteria particles increase recently. In this study, a chamber(0.8m x 0.8m x 1.56m) system was built in order to simulate real conditions for reducing airborne bacteria, and evaluated by a simple aerosol reduction test. A method utilizing CFD(Computational Fluid Dynamics) simulation was used to detect the horizontal cross-sectional area which represents particle distribution in the chamber. Then an air-cleaner with HEPA filter and Carbon Fiber Ionizer was located on that area for aerosol reduction test. The CFD result found the area was located at 0.2m height from the bottom of the chamber, and the test showed aerosol reduction efficiencies using measurements of number concentration and CFU(colony forming unit) per each case. At the measurement of number concentration, the reduction efficiency of air-cleaner with filter and ionizer(Case 3) was about 90% after 4 minutes from the stop of the bacteria injection, and that with only filter(Case 2) was about 90% after 8 minutes from the beginning. Lastly, that without filter and ionizer(Case 1) was about 30% after 10 minutes. At the measurement of CFU, it shows similar results but it is related to viability of bio-aerosol.

SWMM-LID 모델을 이용한 토지주택연구원의 물순환 개선효과 평가 (Evaluation of Water Cycle Improvement in LH Institute Using SWMM-LID Model)

  • 정종석;정광욱;강수만;현경학
    • 한국물환경학회지
    • /
    • 제34권3호
    • /
    • pp.308-315
    • /
    • 2018
  • SWMM-LID was calibrated with flow monitoring data in LHI to evaluate runoff after LID application. The flow rate in the B basin was estimated to be 0.94 and 6.15 for O/S and $D_v$, respectively. In the A and C basins, the difference between the observed and simulated data was greater than in the B basin. As a result of runoff reduction efficiency by the application of LID facilities, the change of infiltration increased from 34.6 % to 45.8 % in the entire watershed, and the runoff decreased from 58.8 % to 46.3 %. In the runoff reduction of each LID facility, rain garden E showed the highest effect with 99.9 % and bioretention B showed the lowest effect with 27.5 %. In order to evaluate the efficiency of each LID facility, a comparison is made between the pore volume (V) of the LID and the catchment area (A). The runoff showed a runoff reduction effect of about 70 % above the 0.1 volume/area (V/A) value. As a result of examining the runoff reduction with LID facilities by the LID module of SWMM, a reasonable design is possible by reflecting the appropriate LID volume to drainage area.

Shear capacity of stud shear connectors with initial damage: Experiment, FEM model and theoretical formulation

  • Qi, Jianan;Wang, Jingquan;Li, Ming;Chen, Leilei
    • Steel and Composite Structures
    • /
    • 제25권1호
    • /
    • pp.79-92
    • /
    • 2017
  • Initial damage to a stud due to corrosion, fatigue, unexpected overloading, a weld defect or other factors could degrade the shear capacity of the stud. Based on typical push-out tests, a FEM model and theoretical formulations were proposed in this study. Six specimens with the same geometric dimensions were tested to investigate the effect of the damage degree and location on the static behavior and shear capacity of stud shear connectors. The test results indicated that a reduction of up to 36.6% and 62.9% of the section area of the shank could result in a dropping rate of 7.9% and 57.2%, respectively, compared to the standard specimen shear capacity. Numerical analysis was performed to simulate the push-out test and validated against test results. A parametrical study was performed to further investigate the damage degree and location on the shear capacity of studs based on the proposed numerical model. It was demonstrated that the shear capacity was not sensitive to the damage degree when the damage section was located at 0.5d, where d is the shank diameter, from the stud root, even if the stud had a significant reduction in area. Finally, a theoretical formula with a reduction factor K was proposed to consider the reduction of the shear capacity due to the presence of initial damage. Calculating K was accomplished in two ways: a linear relationship and a square relationship with the damage degree corresponding to the shear capacity dominated by the section area and the nominal diameter of the damaged stud. This coefficient was applied using Eurocode 4, AASHTO LRFD (2014) and GB50017-2003 (2003) and compared with the test results found in the literature. It was found that the proposed method produced good predictions of the shear capacity of stud shear connectors with initial damage.

탄소흡수원을 고려한 개발사업 환경영향평가 방안(I) - 태양광발전소 건설사업 사례를 중심으로 - (Environmental Impact Assessment for Development Projects Considering Carbon Sink and Sequestration(I) - Focused on a Solar Power Plant Development Project -)

  • 황상일;박선환
    • 환경영향평가
    • /
    • 제19권6호
    • /
    • pp.625-631
    • /
    • 2010
  • The objective of this work was to investigate how carbon sink and sequestration of vegetation and soil in the development project area can impact the land use plan, in addition to carbon emission capacity of the development project when we conduct environmental impact assessment. Especially, we did this work for a development project of solar power plant which would be constructed in forest area. Through this work, we found that 1) the amount of carbon sink and sequestration largely decreased due to reduction of the green area, 2) in terms of carbon sink and sequestration, conservation of natural green area is better than construction of newly vegetated area, 3) biochar application into soil can become an alternative for increase of carbon sink, and 4) even though a solar power production does hugely reduce carbon emissions and offset the carbon sink and sequestration capacity from the forest, it is necessary to consider the public value of the forest(reduction of heat island, habitat etc.) in siting for development area.

도시지역 CSOs 저감을 위한 저류조 및 이송관로의 최적 용량결정에 관한 연구 (Study on the determination of optimum size of storage tank and intercepting capacity for CSOs reduction in urban area)

  • 이관용;최원석;이용재;구원석;송창수
    • 상하수도학회지
    • /
    • 제26권6호
    • /
    • pp.735-745
    • /
    • 2012
  • Storage method is one of major measures for reduction of CSOs pollutant loads and several projects have been done nationwide. But systematic analysis of intercepting capacity has not been studied to determine optimum size of storage facility. In this research, not only storage volume but also intercepting capacity which means flow capacity from intercepting facility to CSOs storage facility was studied and optimum sizing method for storage facility was proposed. The result shows that pollutants reduction efficiency can be increased significantly by increasing intercepting capacity and it might reduce storage volume and total construction costs. Intercepting capacity for the study area was evaluated and it was shown as equivalent to 83 % probability rainfall intensity.