• Structural Engineering and Mechanics
• /
• 제64권6권
• /
• pp.695-701
• /
• 2017

This paper investigates some general properties in the degenerate scale problem of antiplane elasticity or Laplace equation. For a given configuration, the degenerate scale problem is solved by using conformal mapping technique, or by using the null field BIE (boundary integral equation) numerically. After solving the problem, we can define and evaluate the degenerate area which is defined by the area enclosed by the contour in the degenerate configuration. It is found that the degenerate area is an important parameter in the problem. After using the conformal mapping, the degenerate area can be easily evaluated. The degenerate area for many configurations, from triangle, quadrilles and N-gon configuration are evaluated numerically. Most properties studied can only be found by numerical computation. The investigated properties provide a deeper understanding for the degenerate scale problem.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.274-279
• /
• 2012

Daegu Solar Power Tower Plant of 200 kW thermal capacity was developed for the first time in Korea, 2011. Measurement of the heat flux distribution is essential to evaluate the solar energy concentrated by reflectors and to design a suitable receiver. The flux mapping technique, which uses a radiometer and a diffuse plate, is common for measurement of the heat flux distribution. Because the solar power tower plant has a wide concentration area, the flux mapping technique using a fixed diffuse plate is difficult to apply. Therefore, the flux distribution in the solar power tower plant should be measured by the flux mapping technique using a small moving bar. In this study, we measured flux distributions with the moving-bar system developed at the KIER solar furnace and evaluated its applicability for the solar power tower plant.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.75-77
• /
• 2003

The spatial distribution of snow cover area is a crucial input to models of hydrology and climate in alpine and other seasonally snow covered areas.The objective in our study is to develop a rapidly automatic and high accuracy snow cover mapping algorithm applicable for the Tibetan Plateau which is the most sensitive about climatic change. Monitoring regional snow extent reqires higher temoral frequency-moderate spatial resolution imagery.Our algorithm is based AVHRR and MODIS data and will provide long-term fraction snow cover area map.We present here a technique is based on the multiple endmembers approach and by taking advantages of current approaches, we developed a technique for automatic selection of local reference spectral endmembers.

• 지구물리와물리탐사
• /
• 제17권4호
• /
• pp.209-215
• /
• 2014

광물자원탐사 기술 개발의 일환으로 광대역 유도분극 탐사 자료를 활용한 광체의 부존 가능성 평가를 위해 모이산 지역에 대한 3차원 포텐셜 지도 구축 연구가 수행되었다. 현장 탐사 결과를 지질모델링 영역별로 해석하여 광체 영역에서 나타나는 위상 및 전기비저항 값의 분포 특성을 해석하였으며, 이를 바탕으로 모이산 광체에 대한 부존 잠재성 평가를 수행하였다. 잠재성 평가 결과 기존에 확인된 광체 영역에서는 높은 부존 가능성이 확인되었으며, 최근 시추를 통해 확인된 일부 광체 영역에서도 주변부에 비해 잠재성이 높은 것으로 해석되어 신뢰도가 높음을 확인하였다. 광체 분포특성에 따라 효과적으로 측선 설계가 이루어지고 보다 조밀한 광대역 유도분극 탐사 자료를 얻을 경우 이번 연구를 통해 습득한 해석 기술은 광체 평가에 효율적으로 적용될 수 있을 것으로 판단된다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.369-373
• /
• 2006

본 연구는 3차원 도시 모델링을 위해 라이브러리 기반의 texture mapping 기법을 사용하여 건물 모델을 제작하였다. 이 기법은 건물의 종류 및 특성에 따라 라이브러리 형태로 구축되어있는 texture map을 선택, 출력하여 3차원 건물 프레임에 mapping하는 과정으로 이루어진다. 이 기법의 효과적인 적용을 위해 LiDAR 데이터를 이용하여 건물을 자동적으로 분류하였고, LiDAR 데이터와 수치지도를 이용하여 단위 모델 구현을 위한 건물의 3차원 프레임을 제작하였다. 또한 사실감 있는 건물 texture를 구현하기 위해 실제 건물의 지상사진을 이용하여 texture map 라이브러리를 구축하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.430-433
• /
• 2005

In this study, weight of evidence(WOE) technique based on the bayesian method was applied to estimate the groundwater yield characteristics in the Pocheon area in Kyungki-do. The ground water preservation depends on many hydrogeologic factors that include hydrologic data, landuse data, topographic data, geological map and other natural materials, even with man-made things. All these data can be digitally collected and managed by GIS database. In the applied technique of WOE, The prior probabilities were estimated as the factors that affect the yield on lineament, geology, drainage pattern or river system density, landuse and soil. We calculated the value of the Weight W+, W- of each factor and estimated the contrast value of it. Results by the ground water yield characteristic calculations were presented in the form of posterior probability map to the consideration of in-situ samples. It is concluded that this technique is regarded as one of the effective technique for the feasibility mapping related to detection of groundwater bearing zones and its spatial pattern.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.744-746
• /
• 2003

A 3D modeling of urban area can be composed the terrain modeling that can express specific and shape of the terrain and the object modeling such as buildings, trees and facilities which are found in urban areas. Especially in a 3D modeling of building, it is very important to make a unit model by simplifying 3D structure and to take a texture mapping, which can help visualize surface information. In this study, the texture mapping technique, based on library for 3D urban modeling, was used for building modeling. This technique applies the texture map in the form of library which is constructed as building types, and then take mapping to the 3D building frame. For effectively apply, this technique, we classified buildings automatically using LiDAR data and made 3D frame using LiDAR and digital map. To express the realistic building texture, we made the texture library using real building photograph.

• 소성∙가공
• /
• 제1권1호
• /
• pp.52-65
• /
• 1992

In this study a new simplified three-dimensional numerical method and the associated computer program have been developed to simulate the non-axisymmetric extrusion processes. The two-dimensional rigid-plastic finite element method under the generalized plane-strain condition is combined with the slab method. To define the die geometry for a non-axisymmetric extrusion. area mapping technique was used. Streamlined die surface was used to minimize the total extrusion pressure. Extrusion of square, hexagonal and 'T' section from round billet have been simulated and experimented with a model material. The computed results were in good agreement with the experiments in cross-sectional grid distortion. Computational results will be valuable for designing tool geometries and corresponding processes.

• 한국측량학회지
• /
• 제26권1호
• /
• pp.1-7
• /
• 2008

지리정보의 중요성으로 정부에서도 많은 예산을 투자하여 국가지리정보체계(NGIS)를 구축중이다. 본 연구는 국가지리정보체계 추진계획에 의해 구축한 수치임상도DB 등 기 구축되어있는 이 기종 지형DB들을 활용하여 국방지형DB의 산림 레이어를 효율적으로 구축할 수 있는 스키마매핑 기법을 연구하였다. 이를 위하여 대상지역의 이 기종 지형DB들의 스키마를 각각 분석한 후 관련속성들을 연결한 매핑테이블을 작성하고 도형 및 속성들을 일괄 처리하여 대상지역의 국방지형DB산림 레이어를 효율적으로 구축하였다. 실험결과 본 연구에서 제안한 스키마매핑 기법으로 기 구축되어있는 이 기종 지형DB들 간의 자료 호환 문제를 효율적으로 해결할 수 있는 방법을 제시하였다.

• 한국해양공학회지
• /
• 제13권3호통권33호
• /
• pp.12-20
• /
• 1999

In this paper, method for mapping a three-dimensional shape into the two-dimensional plane will be introduced. This method is referred to geometric modelling and means a transformation between the flat sheet and final surface. The initial blank shape represents the original configuration of the final shape formed into three dimensional surface. The initial constant constant area mapping hypothesis was used in this paper. This technique will be applied to the basic data for an interactive computer design capable of dealing with typical stamping process, including deep parts and complex shapes.