• Structural Engineering and Mechanics
• /
• v.64 no.6
• /
• pp.695-701
• /
• 2017

This paper investigates some general properties in the degenerate scale problem of antiplane elasticity or Laplace equation. For a given configuration, the degenerate scale problem is solved by using conformal mapping technique, or by using the null field BIE (boundary integral equation) numerically. After solving the problem, we can define and evaluate the degenerate area which is defined by the area enclosed by the contour in the degenerate configuration. It is found that the degenerate area is an important parameter in the problem. After using the conformal mapping, the degenerate area can be easily evaluated. The degenerate area for many configurations, from triangle, quadrilles and N-gon configuration are evaluated numerically. Most properties studied can only be found by numerical computation. The investigated properties provide a deeper understanding for the degenerate scale problem.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.274-279
• /
• 2012

Daegu Solar Power Tower Plant of 200 kW thermal capacity was developed for the first time in Korea, 2011. Measurement of the heat flux distribution is essential to evaluate the solar energy concentrated by reflectors and to design a suitable receiver. The flux mapping technique, which uses a radiometer and a diffuse plate, is common for measurement of the heat flux distribution. Because the solar power tower plant has a wide concentration area, the flux mapping technique using a fixed diffuse plate is difficult to apply. Therefore, the flux distribution in the solar power tower plant should be measured by the flux mapping technique using a small moving bar. In this study, we measured flux distributions with the moving-bar system developed at the KIER solar furnace and evaluated its applicability for the solar power tower plant.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.75-77
• /
• 2003

The spatial distribution of snow cover area is a crucial input to models of hydrology and climate in alpine and other seasonally snow covered areas.The objective in our study is to develop a rapidly automatic and high accuracy snow cover mapping algorithm applicable for the Tibetan Plateau which is the most sensitive about climatic change. Monitoring regional snow extent reqires higher temoral frequency-moderate spatial resolution imagery.Our algorithm is based AVHRR and MODIS data and will provide long-term fraction snow cover area map.We present here a technique is based on the multiple endmembers approach and by taking advantages of current approaches, we developed a technique for automatic selection of local reference spectral endmembers.

• Geophysics and Geophysical Exploration
• /
• v.17 no.4
• /
• pp.209-215
• /
• 2014

In order to develop a new mineral exploration technique, a study was carried out about the potential mapping of Moisan area using SIP (Spectral Induced Polarization) data. The SIP inversion results were classified according to the geological regions, and the distribution characteristics of resistivity and phase values of SIP data were analyzed at the ore region. Based on the characteristics of SIP of ore bodies, we performed 3D potential mapping of Moisan area. The analyzed potential map was verified using that the locations and patterns of high potential regions of the results are well matched with those of the known ore bodies. If we get the higher spatial resolution SIP data, the potential mapping technique using SIP data can be effectively applied to the estimation of mining deposit.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.369-373
• /
• 2006

A 3D modeling of urban area can be composed the terrain modeling that can express specific and shape of the terrain and the object modeling such as buildings, trees and facilities which are found in urban areas. Especially in a 3D modeling of building, it is very important to make a unit model by simplifying 3D structure and to take a texture mapping, which can help visualize surface information. In this study, the texture mapping technique, based on library for 3D urban modeling, was used for building modeling. This technique applies the texture map in the form of library which is constructed as building types, and then take mapping to the 3D building frame. For effectively apply, this technique, we classified buildings automatically using LiDAR data and made 3D frame using LiDAR and digital map. To express the realistic building texture, we made the texture library using real building photograph.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.430-433
• /
• 2005

In this study, weight of evidence(WOE) technique based on the bayesian method was applied to estimate the groundwater yield characteristics in the Pocheon area in Kyungki-do. The ground water preservation depends on many hydrogeologic factors that include hydrologic data, landuse data, topographic data, geological map and other natural materials, even with man-made things. All these data can be digitally collected and managed by GIS database. In the applied technique of WOE, The prior probabilities were estimated as the factors that affect the yield on lineament, geology, drainage pattern or river system density, landuse and soil. We calculated the value of the Weight W+, W- of each factor and estimated the contrast value of it. Results by the ground water yield characteristic calculations were presented in the form of posterior probability map to the consideration of in-situ samples. It is concluded that this technique is regarded as one of the effective technique for the feasibility mapping related to detection of groundwater bearing zones and its spatial pattern.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.744-746
• /
• 2003

A 3D modeling of urban area can be composed the terrain modeling that can express specific and shape of the terrain and the object modeling such as buildings, trees and facilities which are found in urban areas. Especially in a 3D modeling of building, it is very important to make a unit model by simplifying 3D structure and to take a texture mapping, which can help visualize surface information. In this study, the texture mapping technique, based on library for 3D urban modeling, was used for building modeling. This technique applies the texture map in the form of library which is constructed as building types, and then take mapping to the 3D building frame. For effectively apply, this technique, we classified buildings automatically using LiDAR data and made 3D frame using LiDAR and digital map. To express the realistic building texture, we made the texture library using real building photograph.

• Transactions of Materials Processing
• /
• v.1 no.1
• /
• pp.52-65
• /
• 1992

In this study a new simplified three-dimensional numerical method and the associated computer program have been developed to simulate the non-axisymmetric extrusion processes. The two-dimensional rigid-plastic finite element method under the generalized plane-strain condition is combined with the slab method. To define the die geometry for a non-axisymmetric extrusion. area mapping technique was used. Streamlined die surface was used to minimize the total extrusion pressure. Extrusion of square, hexagonal and 'T' section from round billet have been simulated and experimented with a model material. The computed results were in good agreement with the experiments in cross-sectional grid distortion. Computational results will be valuable for designing tool geometries and corresponding processes.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.1
• /
• pp.1-7
• /
• 2008

The government is spending a large amount of budget to establish NGIS due to the importance of geospatial information. This paper deals with the study of schema mapping technique which can efficiently establish military topographic DB forest layer using digital forest map and other existing geospatial DB. In order to accomplish this each schema of these types of DB was analyzed then, mapping table which connects related attributes was created and finally, military topographical DB forest layer of the area of interest was efficiently established. This research was able to display solutions that resolved compatibility issues between existing geospatial DB of these types, established by the schema mapping techniques described in this research.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3 s.33
• /
• pp.12-20
• /
• 1999

In this paper, method for mapping a three-dimensional shape into the two-dimensional plane will be introduced. This method is referred to geometric modelling and means a transformation between the flat sheet and final surface. The initial blank shape represents the original configuration of the final shape formed into three dimensional surface. The initial constant constant area mapping hypothesis was used in this paper. This technique will be applied to the basic data for an interactive computer design capable of dealing with typical stamping process, including deep parts and complex shapes.