• Journal of the Korean Society of Hazard Mitigation
• /
• v.1 no.1 s.1
• /
• pp.103-115
• /
• 2001

The current procedure to design hydraulic structures in a small basin area is to estimate the probable rainfall depth using rainfall intensity formula. The estimation of probable rainfall depth has many uncertainties inherent with it. However, it has been inevitable to simplify the nonlinearity if the rainfall in practice. This study attend to address a method which can model the nonlinearity in order to derive better rainfall intensity formula for the estimation of probable rainfall depth. The results show that genetic algorithm is more reliable and accurate than trial-and-error method or nonlinear programming technique(Powell's method) in the derivation of the rainfall intensity formula.

• Journal of Environmental Impact Assessment
• /
• v.9 no.3
• /
• pp.249-255
• /
• 2000

The comparison of three different kind of simulation by screen3 model, Tem-8 model and EPA formula were undertaken to get a potential concentration and hourly maximum concentration of fugitive dust produced from each construction site in the downtown area of puchon city. The amount of dust estimate U.S EPA formula and fugitive dust formula 22.6078g/sec, 27.9572g/sec respectively. Hourly maximum concenstration at the distance from each construction site by screen3 model are average of $78.89{\sim}728.40{\mu}g/m^3$ and Tem-8 model are $97{\mu}g/m^3$ in site-1, $241{\mu}g/m^3$ in site-2, $268{\mu}g/m^3$ in site-3, $232{\mu}g/m^3$ in site-4, $69{\mu}g/m^3$ in site-5, $36{\mu}g/m^3$ in site-6. Through our experiment, Screen3 model is more encouragingly used than any other model.

• Journal of Nutrition and Health
• /
• v.27 no.10
• /
• pp.1048-1057
• /
• 1994

Nonobese NIDDM patients were studied were studied with respect to changes in visceral protein status, serum glucose and lipids and insulin secretion capacity before and after intake of enteral formula. Patients with renal or hepatic disease, gastrectomy, malabsorption, weight gain over past 6 months and poorly controlled blood glucose level were excluded. Eighteen patients served as case and administered, in addition of their usual diet, 400ml of enteral formula for 8 weeks. Another 18 patients participated in controls and had usual food intake for 8 weeks. In the begining, the levels of fasting and postprandial glucose, glycated hemoglobin, triglyceride, HDL, LDL, total cholesterol, albumin, total protein and transferrin and glucose response area on oral glucose tolerance test were not different between two groups. The response areas of insulin, C-peptide and free fatty acid and serum IGF-1 level were higher in the case than in the control group. Energy intake of patients given enteral formula exceeded their estimated energy requirements(108%) and they consumed a mean of 112g protein per day. Patients given enteral formula showed an increase in body weight(4.4%), serum transferrin(10%), IGF-1(13%) and triglyceride(34%) while controls showed no changes in those parameters at 8 weeks compared to initial values. There were no significant changes after 8 weeks in the levels of glucose, glycated hemoglobin, HDL, LDL, total cholesterol, total protein and albumin and response areas of glucose, insulin, C-peptide and free fatty acid in both groups compared to initial values. This study suggests that nutrition supplement with enteral formula can increase body weight and visceral protein status in nonobese NIDDM patients without changes in blood glucose. However, excessive calorie intake could temporarily increase serum triglyceride. In addition, this study indicates that serum transferrin and IGF-1 are more sensitive indicators to changes of protein intake than serum albumin and total protein.

• Steel and Composite Structures
• /
• v.26 no.4
• /
• pp.463-471
• /
• 2018

The bolted end-plate beam-column connections have been widely used in steel structure and composite structure because of its excellent seismic performance. In this paper, the end-plate bolted connection is applied in the concrete structure, A new-type of fabricated beam-column connections with end-plates is presented, and steel plate hoop is used to replace stirrups in the node core area. To study the seismic behavior of the joint, seven specimens are tested by pseudo-static test. The experimental results show that the new type of assembly node has good ductility and energy dissipation capacity. Besides, under the restraint effect of the high-strength stirrup, the width of the web crack is effectively controlled. In addition, based on the analysis of the factors affecting the shear capacity of the node core area, the formula of shear capacity of the core area of the node is proposed, and the theoretical values of the formula are consistent with the experimental value.

• Journal of Fashion Business
• /
• v.13 no.4
• /
• pp.137-153
• /
• 2009

Recently, young men have become more muscular as they become more interested in physical figure. However, most of these muscular men have fit problems regarding ready-made clothes. In view of this, this study aimed to develop a prototype jacket pattern for muscular men. For this study, five muscular men were selected to put on existing jacket pattern for wearing tests. The regression formula, in which muscular men body measures were adopted, was applied to unsuitable parts, especially the areas determined not to be appropriate in the evaluation of existing jacket pattern wearing tests. After the first and the second jacket pattern wearing tests, the final jacket pattern suitable for muscular men was developed. The results of the study were as follows: In order to make up for the problem of the loosening of the lapel area, due to the development of the chest muscle, the chest circumference line on the chest area of the pattern was cut to be 1.0cm wide; thus, the front length was modified with an increase. The wearing tests found that a wearers felt discomfort from the tight armhole area, so the armhole depth was set to be a little lower than that of ready-made clothes. A muscular men needs much more extra quantity in this area because the upper part of the back side is projected due to the greater development of the trapezius muscle and the deltoid than in average men. Hence, concerning the standard line for the length of the back interscye, ease of 1.0cm was added to the regression equation formula {(0.371${\times}$chest circumference+3.145)/2} in order to resolve the discomfort with the back area. Also, for the biacromion length, the upper arm protruded more than the shoulder point of the jacket because of the development of the deltoid and the upper arm muscle, and it was set to be wider than the actual shoulder. In order to solve the problem of discomfort from the narrow neck area during the wearing of a jacket owing to the development of the trapezius muscle, extra ease of 0.5cm was added to chest circumference/12-0.5cm in the existing jacket prototype to the width of back of the neck, and it was corrected to be chest circumference/12.

• Education of Primary School Mathematics
• /
• v.3 no.2
• /
• pp.103-107
• /
• 1999

This article introduces a proposed lesson to help younger or lower level mathematics students conceptualize area. The objective for the proposed lesson was for the student to demonstrate an understanding of the concept of area by identifying the area, in square units, of polygons drawn on computer dot board constructed by computer software, Geometer's Sketchpad. The concept of covering is the key to develop the concept of the area. The article proceeded from rectangular figures, to right-triangular figures, to non-right triangular figures, then to polygons to find the area and develop the formula for the area of the figures. It is meaningful that this kind of materials can be developed within interactive computer environment since students feel successful in loaming and teachers use them directly in their measurement classes.

• Agribusiness and Information Management
• /
• v.6 no.2
• /
• pp.40-48
• /
• 2014

As basic research to develop HEV and EV agricultural field machinery, the present study analyzes the technical trend of electric agricultural field machinery through product analysis, paper analysis, and patent analysis concerning HEV and EV in the automobile, construction machinery, and agricultural machinery sectors. For product analysis, the homepages of companies in these sectors were consulted to analyze the number of products of each company. For paper analysis, key words related to HEV and EV were selected, a search formula was drawn up, and articles search sites were consulted. And for patent analysis too, key words were selected and then a search formula was drawn up to examine published patent applications or registered patent applications, and trends were analyzed by structure, country, and year. The number of HEV and EV products were 17 in the automobile area, 8 in construction machinery, and 4 in agricultural machinery. Notably, in the agricultural machinery area, all HEV and EV products were from advanced companies overseas. In terms of papers, papers published in the past 5 years were searched and 33,195 papers were from the automobile area, 3,806 were from construction machinery, and 2,687, the fewest papers, were from the agricultural machinery area. A search of patents in the electric drive technology area in Korea, USA, and Japan, and Europe showed 1,927 valid patents, with 1,120 in Japan, 497 in USA, 193 in Korea, and 117 in Europe. Analysis of the trend of research on electric agricultural field machinery by product, paper, and patent shows the development of HEV and EV technology in Korea is insufficient compared to USA, Japan, and Europe, which means rapid technological development is needed.

• Childhood Kidney Diseases
• /
• v.19 no.2
• /
• pp.131-135
• /
• 2015

Purpose: The aim of this study was to establish a simple formula to predict renal length in children using a Technesium-99m dimercaptosuccinic acid (DMSA) scan data, and to compare it with the formula derived from ultrasonography, which is widely accepted. Methods: Children who underwent a DMSA scan and ultrasonography were reviewed retrospectively, and those who had anatomical urinary tract abnormalities or urinary tract infections were excluded. Results: A total of 230 children (84 males and 146 females; age, 1 month to 16 years; mean age, $16.8{\pm}27.4$ months). Mean renal length measured by DMSA scan was longer than that by ultrasonography ($6.38{\pm}1.16$ vs. $6.02{\pm}1.14cm$; P < 0.001). Renal length was correlated with age, weight, height, and body surface area on the DMSA scan and ultrasonography, and showed the strongest positive correlation with height. The following formulae were established to predict renal length: mean renal length (cm) = 5.433 ${\times}$ height (m) + 2.330 (R2, 0.833) using the DMSA scan data, and mean renal length (cm) = 5.367 ${\times}$ height (m) + 2.027 (R2, 0.853) using ultrasonography data. Conclusion: We propose a simple height-based formula to predict renal length in children using a DMSA scan data, and validate it by comparing with ultrasonography formula.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.22 no.2
• /
• pp.55-62
• /
• 2018

In this study, natural period formular is presented for a RC shear wall structure with H-, T-, and L-shaped wall sections. The natural period formular proposed by Goel and Chopra and adopted in ASCE 7-10 was modified by using the ratio of the flange and web wall area. The natural periods of structures with H-shaped wall were numerically obtained, the results indicated that the ASCE 7-10 could not consider the natural period variation according to the length of the flange wall, but the proposed formula could do. Especially, ASCE 7-10 estimated much longer periods than eigenvalue analysis, and this implies that conservative seismic design is difficult. The periods by eigenvalue analysis exist between the upper and lower bounds given by the proposed formula, and conservative design is possible by using the proposed lower bound value. In order to verity the effectiveness of the proposed method, actual residential buildings with various types of flange walls are considered. Ambient vibration tests, eigenvalue analyses, and nonlinear dynamic analyses were conducted and the periods were compared with the values by ASCE 7-10 and the proposed formula. The results showed that the proposed formula could estimate more accurately the periods than ASCE 7-10.

• Preventive Nutrition and Food Science
• /
• v.16 no.3
• /
• pp.248-252
• /
• 2011

Soy protein based formula (SPF) has been developed for infants who are at a high risk for atopic dermatitis (AD) and cow's milk protein allergy (CMA). We performed this study to evaluate the therapeutic efficacy and safety of SPF compared to conventional hydrolyzed cow's milk formula (hCMF) in the feeding of infants with AD and CMA. 38 infants (12 to 24 months of age) diagnosed with CMA and AD were randomized to receive either SPF or hCMF for 12 weeks. Follow-up was conducted at 4, 8 and 12 weeks. Growth parameters of the infants were evaluated during each visit. Clinical evaluations, including AD severity scores, pruritus, specific immunoglobulin E (IgE) (cow's milk protein and soy protein) levels of peripheral blood, were made at enrollment and week 12. Analysis was performed on the 32 infants (SPF: n=16, hCMF: n=16) who completed the 12-week intervention. Eczema area and severity index (EASI) scores, a measure of the severity of AD, and pruritus were significantly reduced after 12 weeks compared to enrollment in the both groups; however, the median changes for EASI scores and pruritus were not statistically different between the two groups. The growth parameters did not differ significantly between both groups at any assessed time point. This study suggests that SPF could be useful in decreasing the severity of AD without affecting infant growth status. Therefore SPF could provide an adequate and safe alternative to hCMF in treating infants with AD and CMA during the first 12 to 24 months of their life.