• 건축역사연구
• /
• 제28권3호
• /
• pp.7-18
• /
• 2019

This study analyzed "Bukgwol Dohyeong (Drawing Plans for the Northern Section of Gyeongbokgung Palace)", which is an important source material for the restoration of the palace, by applying Paltaekron, the geomantic principle of bearings, in order to clarify the building layout principle of Gyeongbokgung Palace. Gyeongbokgung Palace shows the typical geographical conditions that meet the principle of Baesan Imsu (mountain in the back and water in the front) which takes Baegaksan Mountain as the main mountain and the overall layout of the buildings that meet the principle of 'Jeonchak Hugwan (narrow in the front and broad toward inside)' by using the natural topography that meets the principle of 'Jeonjeo Hugo (low in the front and higher toward back).' It is estimated that this layout and arrangement must have been led by geomantic principle of bearings. The analysis of the building layout plan of Gyeongbokgung Palace in the late Joseon Dynasty Period suggests the application of two methods: one is to divide central area from Gwanghwamun Gate to Geoncheongung Hall into eight layers and the other is to apply the bearings of the Eight Trigrams based on the building that becomes the center. As a result, the gate, main hall, and kitchen of all major buildings where the royal family lived are located in the auspicious bearings according to the geomantic principle of bearings while the spaces where people other than the royal family such as those who served the royal family and the officials operated in the palace or the hall that enshrines the ancestors such as Taewonjeong Hall are located in the ominous bearings. Therefore, the buildings of Gyeongbokgung Palace are arranged based on the geomantic principle of bearings.

• 대한건축학회논문집:계획계
• /
• 제35권3호
• /
• pp.91-102
• /
• 2019

This study explores the causes and processes of morphological transformation of apartment complexes in Busan. All apartment complexes built until the year 2016 were selected for statistical analysis, drawing/map examination, field observation, selected expert interviews based on 6 periodical groups: Period I(~1990), Period II(1991~1995), Period III(1996~2000), Period IV(2001~2005), Period V(2006~2010), and Period VI(2011~2016). The research argues for three 'arrangement' types, P1U, L1U and P2U, which have dominated the whole periods occupying 88% of the total 260 complexes. The switch of the leading type represents for morphological transformation of apartment complexes. Four aspects, density(F.A.R.), height(maximum number of floors), deformed-building-type ratio, and building-orientation, have affected the change of 'arrangement' types. Density was the major cause of the arrangement-type switch, from P1U to L1U, on Period II(1991~1995). The morphological change, from type L1U to P2U, on Period V(2006~2010) was caused by height and orientation, and is correlated with the increased number of deformed-type buildings. The first phase morphological change on Period II(1991~1995) was resulted by the supply side of apartment. However, the second phase transformation on Period V(2006~2010) had gone through the complex process including reflection of consumers' demands. The significance of research is to reveal the morphological transformation process of apartment complexes through analytical investigation of the entire apartment data in Busan. The result shows that the major change of urban paysage started to occur from Period V(2006~2010), and the superficial evaluation on apartment 'being monotonous and repetitive' may not be proper at least from the perspective of town plan.

• 대한건축학회논문집:계획계
• /
• 제35권7호
• /
• pp.81-88
• /
• 2019

The purpose of this study is to investigate the relations between brick and stone brick pagodas in all classes of pagoda with their construction and shape. Research objects of this study are brick and stone brick pagodas of National Treasure and Treasure and masonry pagodas that are similar to brick and stone brick pagoda. This study includes checking preceding researches, drawing questions from these preceding researches, and finding answers from these questions. The results of this study are as follows. First, pagoda of Bunhwangsa Temple, the first pagoda in the Silla Dynasty, was built as a masonry pagoda, not a stone brick pagoda. Second, roofs of stone brick pagoda barrows from brick pagoda's techniques for performance of material and ease construction. Third, brick or stone brick pagodas' base have Type II that has low and extensive foundation with soil and stones usually. Forth, Korean pagodas are categorized by their materials, construction methods, and shapes. Wooden pagodas, stone pagodas, and brick pagodas are categorized by materials, post-and lintel pagodas and masonry stone pagodas are categorized by construction methods, and pitched roof pagodas and terraced roof pagodas are categorized by shapes. Fifth, masonry pagodas of Buddhism that have shape of multi-story building were developed from Doltap, traditional stone stack, and they advanced with brick pagodas and stone pagodas to terraced roof stone pagodas and post-and lintel base brick pagodas.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제27권4호
• /
• pp.15-27
• /
• 2021

Purpose: This study compares and analyzes the design drawing changes that occur during the design process between hospital design competition and the final detailed design. Based on this, factors that can reduce the rate of changes in drawings are derived. The purpose is to provide basic data to lessen the rate of the changes in the process of architecture design and can be reflected in the design competition guidelines. Methods: In this study, cases of hospitals are selected which are built in 5 recent years. Then compare and analyze the drawings which was drawn in the process from submission of competition to final design. After investigating the design changes that occur after the design competition, analyze the fixed-elements which are the main causes of design changes. Fixed-elements can be narrow down into few architecture-factors such as vertical-core, shafts, public-corridor, HAVC, and mechanical/electrical spaces. Results: Result of the rate of changes in each selected hospital floors can be sorted into variable-elements and fixed-elements which tells that the higher the rate of changes of the fixed-elements, the higher the rate of changes of the variable-elements. Implications: In other words, it can be said as the lower the change rates of the fixed-element, lower changes in whole design changes which represents that the greater the efficiency can be shown in the design process.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제29권3호
• /
• pp.17-28
• /
• 2023

Purpose: This study aims to provide basic data for the future construction plans of the Infectious Disease Hospitals by analyzing the area composition and required room ratios in the wards and ICU of currently under-construction infectious disease hospitals. Methods: 3 Methods have been used in this paper. 1) This study conducted a literature review on major considerations and related guidelines for hospitals specializing in infectious diseases using existing data. 2) Based on the objects and activities of the hospital space, zones and areas were set for each department according to infection control. 3) Based on the established zones and areas, basic plan drawings of three hospitals specializing in infectious diseases currently under construction were collected and architectural drawing analysis was performed. Results: 1) Infectious Diseases Hospital must have a spatial organization that can accommodate patient isolation, infection control, efficiency of medical service, and changes. 2) Zones for infection control are divided into negative pressure and non-negative pressure zones based on airborne precaution isolation. It is divided into clean and contaminated zone according to class of cleanliness by Aseptic technique. Areas are classified by objects (patients, healthcare workers, supplies) and activities (access, medical treatment, support), and a system for organizing space is established based on this. 3) By analyzing the area composition of each departmental area, each required room, and each required space in the wards and intensive care units, it provides basic data for the spatial organization for architectural planning of the infectious disease hospital. Implication: It can be used as basic data when planning related facilities by analyzing the characteristics of the space plan of the required room according to the relationship between activities, movement lines, and operation plans based on user behavior.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.1067-1074
• /
• 2022

An architect creates his/her design to meet owner's requirements. Floor plans, perspective drawings, and scale models are used in order for the owner to choose the design. The tools are a little helpful for communication between the architect and the owner in case the owner does not know architecture. The scale models are good, but it is hard to make scale models while design is in progress. 3D CAD is a good tool for communication, but it is time-consuming and requires high-performance computer hardware. Augmented reality is able to show 3D virtual models that are updated by the architect with smart devices such as a smart phone and a tablet PC. The owner frequently reviews the updated design anytime anywhere. This study proposes a method to use augmented reality for architectural design and construction management. The method supports the communication between the owner, the architect and the contractor to review updated designs, and to complete the building project. 3D models expressed in augmented reality are created using SketchUp with 2D drawings for building construction. An Android application implementing augmented reality is developed by Qualcomm Vuforia and Unity on smart devices. Drawings as markers and 3D models are connected in Unity. And functions that temporarily hide unnecessary parts can be implemented in C# programming language. If an owner, an architect, or a contractor looks at a smart phone on a 2D drawing, he/she can identify building elements such as 3D buildings or columns on a screen. This can help communication between them.

• 한국전산구조공학회논문집
• /
• 제27권4호
• /
• pp.289-296
• /
• 2014

철근 공사에는 원청 건설사, 골조 전문건설사, 배근시공도 작성자, 철근 가공장, 감독/감리사, 구조설계자 등 다수의 업무 주체가 참여하고 있으나 이들간의 합리적인 협업이 이루어질 수 있는 업무 프로세스가 구축되어 있지 않아 비효율을 초래할 가능성이 높다. 특히 철근공사는 RC골조 품질에 결정적 영향을 주는 업무이지만 참여 주체간 원활한 협업 부재로 인하여 골조의 품질 저하, 생산성 감소, 공기 지연 등 많은 문제를 야기하고 있다. 그러므로 RC골조공사는 혁신이 매우 시급한 분야라 하겠다. 최근 BIM은 건설산업의 기술 환경 패러다임을 전환시키는 기술로 인식되고 확산되고 있다. 그런데 3차원 모델 상에서 방대한 양의 철근상세정보를 모델링하기 위해서는 많은 시간과 노력이 소요되고, 모델링 후에도 데이터량의 방대함으로 인하여 프로그램 성능이 원활하게 발현되지 않기에 BIM 기술의 확산에도 불구하고 배근 설계와 시공과 관련하여 BIM 기술이 활용되고 있지 않은 상황이다. 본 기술은 3차원 BIM 환경 하에서 골조상세정보 모델링과 배근상세설계, 정밀물량산출 및 공사관리까지를 지원하는 Rebar HUB를 개발하여 RC 골조 설계 및 공사 프로세스를 합리화할 수 있는 실용적 기술 개발을 목표로 하였다.

• 교육시설 논문지
• /
• 제20권2호
• /
• pp.33-42
• /
• 2013

Due to the lack of available site in urban setting outdoor space in elementary schools are getting smaller and tend to be replaced by indoor spaces. Focusing on courtyard, piloti space and roof space, this study analyzed the current condition and usage of the outdoor spaces in the urban mini-schools based on the analysis of architectural drawing, interview, survey, and observation. Following issues are found for appropriate planning for outdoor spaces in the urban mini-schools. Firstly, roof space needs to be coordinated with the physical education and outdoor class curriculum and should be planned separately for quiet activities. Secondly, the piloti space should be planned as an independent space rather than a connection between classroom and outdoor space, with appropriate surveillance from teacher's space for the lower graders. Thirdly, courtyard space, typical space in urban mini school surrounded by densely arranged buildings, should be thermally controlled for outdoor class or resting with appropriate screen from noise to keep quiet atmosphere.

• 한국BIM학회 논문집
• /
• 제6권1호
• /
• pp.25-32
• /
• 2016

In BIM environments for infrastructures, civil structures such as road, bridge and tunnel etc., created into 3D objects, integrated with their properties, securing BIM design productivity is very critical during 3D modeling. To solve this issue, configuring BIM libraries so that the users can utilize prefabricating in advance 3D objects that have been applying repeatedly during BIM design is essential so much. Current BIM libraries have made focused on Ready-Made for architectural facilities. However, establishing environment for delivering BIM library for civil facilities is very sparse. Accordingly, this study developed a web-based sharing system for delivering BIM library contents based on standardized drawing for civil area. To do this, we have analyzed core features and operation system of BIM library sharing system in domestic and overseas. Besides, functional requirements that are necessary for developing BIM library sharing system was derived, and through operation scenario configuration, the web-based system was developed according to the detailed mechanism. It is expected that this system can enhance BIM design productivity during library based modeling, and can be utilized as construction supporting tools that can help construction managers to make a design change.

• 한국실내디자인학회논문집
• /
• 제20권2호
• /
• pp.110-119
• /
• 2011

The purpose of this study is to analyze the development and characteristics of Dymaxion housing by R. B. Fuller, who is generally known as a structure engineering, architect and his influences. A document research method was used to analyze and classified of his dymaxion housing projects focused on the late of 1920's. Through this study, the following conclusions have been reached; 1) In order to obtain the productivity and efficiency drawing from the industrialized housing in the early of 1900s, the planning concepts of 'Dymaxion', 'Ehemeralization' and 'Autonomy' were proposed. 2) The planning characteristics of Dymaxion housing projects are classified as three aspects. The first is 'formative aspects' which was focused on the round-shape, transparency and lightweight material such as aluminium for movable and flexible dwelling. The second is 'functional aspects', focused on the mass-production, mobility, flexibility, high-tech and systemizing mechanical equipments for efficiency of household affairs. The third is 'environmental aspects', focused on the energy-saving and environmental control for sustainable dwelling. Dymaxion housing projects of Fuller, an aggregation of high-tech mechanical equipments, had a great impact on the development the concept of mobility and influenced radical and utopian architectural groups' ideas of 1960's. Especially, considering today's high cost of energy and the limited natural resources, Fuller's Dymaxion theory must be re-evaluated.