• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.1
• /
• pp.132-142
• /
• 2003

A significant deficiency of most computer models used for stream floodplain analysis, is that the locations of structures impacted by flood waters, such as roads, buildings, and bridges, cannot be effectively compared to the floodplain location. The purpose of this study is the integration of the HEC River Analysis System(HEC-RAS) with ArcView geographic information system to develop a regional model for floodplain determination and representation. Also this study presents to enable two- and three-dimensional floodplain mapping and analysis in the ArcView. The methodology is applied to a Yeoju of Kyunggi-do, located in South Han River Basin. A digital terrain model is synthesized from HEC-RAS cross-sectional data and a digital elevation model of the study area. The flood plain data developed in ArcView was imported into HEC-RAS where it was combined with the field surveyed channel data in order to construct full floodplain cross sections that reflected accurate channel and overbank data for the HEC-RAS model. The flood plain limits could be expressed more accurately on ArcView by using water level data to be computed in HEC-RAS program. The computed water surface elevations and information of cross-section must be manually plotted in order to delineate floodplains. The resulting of this study provided a good representation of the general landscape and contained additional detail within the stream channel. Overall, the results of the study indicate that GIS combined with HEC-RAS is proven to be very useful and efficient for the automatic generation of flood maps, and an effective environment for floodplain mapping and analysis.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.4
• /
• pp.85-93
• /
• 2011

A parametric study is conducted for the design of segmented arc plasma torch with the input power and current of 0.4 MW and 300 A, respectively. For this purpose, we use the analytical relationship between input power, current condition, plasma temperature, inner diameter (R) and length (L) of the torch constrictor based on arc channel model. The results reveal that arc plasma temperatures increase monotonically as ��L increases or R decreases for the ranges of R ${\leq}$ 7.5 mm and L ${\leq}$ 1.25 m. For larger valuse of ��R and L than 7.5 mm and 1.25 m, respectively, however, they show non-linear behavior corresponding to the variations of ��L, which stands for the generation of unstable arc plasma. From this parametric study, optimum ranges of R and L are suggested as 5.5 mm ${\leq}$ R ${\leq}$ 7.5 mm and 0.25 m ${\leq}$ L ${\leq}$ 0.5 m for 0.4 MW class segmented arc plasma torch, under which stable arc plasma can be achieved at the input currents of ~300 A.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.768-774
• /
• 2010

A parametric study is conducted for the segmented arc plasma torch with the input power and current of 0.4 MW and 300 A, respectively. For this purpose, we use the analytical relationship equations between plasma temperature, inner diameter (R) and length (L) of the torch constrictor at the given input power and current conditions based on the arc channel model. The results reveal that arc plasma temperatures show non-linear behavior or absence corresponding to the variations of L and R when their values become larger than 1.25 m and 7.5 mm, respectively. For L < 1.25 m and R < 7.5 mm, however, they can increase monotonically as L increase or R decrease when one of both parameters is fixed. From these parametric study results, optimum ranges of R and L are suggested as $5.5mm{\leq}R{\leq}7.0mm$ and $0.5m{\leq}L{\leq}1.0m$ for 0.4 MW class segmented arc plasma torch, under which stable arc plasma with the temperatures of ~15,000 K can be achived at the input currents of ~300 A.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.6
• /
• pp.273-284
• /
• 2002

In this paper, computer simulations of the physical Phenomena occurring in the arc region before and after current zero were carried out to evaluate the dielectric recovery characteristics of two types of double-flow nozzles. A commercial CFD Program "PHOENICS" is used for the simulation and the user-coded subroutines to consider the arcing phenomena were added to this program by the authors. The computed results were verified by the comparison with the test results presented by the research group of BBC. In order to investigate the state of the arc region after current zero, the simulation was carried out with four steps. They are cold gas flow analysis, steady state arc simulation, transient arc simulation before current zero, transient hot gas flow simulation after current zero. The semi-experimental arc radiation model is adapted to consider the radiation energy transport and Prandtl′s mixing length model is employed as the turbulence model. The electric field and the magnetic field were calculated with the same grid structure used for the simulation of the flow field. The streamer criterion was introduced to evaluate the dielectric recovery characteristics after current zero. Compared with the results obtained by assuming the current zero state in the former studies, it has been found that the results obtained by considering the state before current zerowere more accurate.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.6
• /
• pp.598-604
• /
• 2007

The purpose of this study is to establish the predictive method of welding distortion and residual stress for the channel I butt SA (submerged arc) weldment using FEA. In order to do it, the heat input model for the weldment was defined as the combined heat source with the surface heat flux of gaussian distribution and volumetric heat source uniformly distributed within weld groove by comparing the shapes of molten pool and temperature distribution obtained by FEA with those of experiments. The arc efficiency of SA welding for two-dimensional FE analysis was evaluated as 0.85. The welding distortion and residual stress of the weldment obtained by FEA and heat input model proposed have a good agreement with those obtained by experiment. Based on the results, it was suggested that the proper heat input model should be required to evaluate the welding distortion for weldment.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.3
• /
• pp.9-18
• /
• 2001

In this paper, we present the joint symbol detection and channel estimation for an orthogonal frequency division multiplexing (OFDM) system in fading channels. The proposed methods are based on decision-directed channel estimation (DDCE) method and their symbol detection is achieved by using Viterbi algorithm. This Viterbi decision-directed channel estimation (VDDCE) method tracks time-varying channels and detects a maximum likelihood symbol sequence. Recursive Viterbi decision-directed channel estimation (RVDDCE) method based on VDDCE method is proposed to shorten the detecting depth. In this method, channel estimate and Viterbi processing are recursively performed every interval of training symbol. Also, average chann'el estimation (ACE) technique to reduce the effect of additive white Gaussian noise (AWGN) is applied VDDCE method and RVDDCE method. These proposed methods arc demonstrated by computer simulation.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.06a
• /
• pp.277-278
• /
• 2010

본 연구는 황해 아산만 중앙천퇴(Surface Sediment)에서 최근 대규모 방조제 건설과 연안 준설로 인해 야기된 해저지형변화에 대한 연구이다. 이러한 해저지형변화는 해도상의 수심정보를 왜곡시킴으로써 국제항을 출입하는 대형선박의 안전항해에 위험요소로 작용할 수 있어, 안전한 항해수로 확보 및 해양사고 저감 대책 마련이 시급하다. 이러한 맥락에서 근본적인 중앙천퇴 지형변화의 원인, 해저지형변화의 양상을 파악하는 것이 이 연구의 일차적인 목적이다. 더 나아가 장 단기 해저지형변화 예측을 통해, 궁극적으로 항해 위험요소 저감 대책 및 정책 마련 시 과학적인 핵심기반기술을 제공하는 것이다. 결국 GIS 기반의 해저지형 공간 분석을 토대로 기존의 미시적인 데이터에 의거한 퇴적환경 연구결과를 객관화하고 정량적인 근거를 제시하는 도구로 활용할 것이다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.4
• /
• pp.481-496
• /
• 1996

The last Sea is a typical bark-arc basin consisting of basins, plateaus, ridges, and seamounts. The Ulleng Basin, located in the southwestern corner of the last Sea, contains thick Neogene sedimentary sequence. Analysis of over 2,500 km of single-channel seismic reflection data suggests that hemipelagic sedimentation prevailed over much of the basin during the late Miocene and pelagic sedimentation became more dominant during the Pliocene. During the Pleistocene terrigeneous sediments transported by turbidity currents and other gravity flows, together with continuous hemipelagic settling, resulted in well-stratified sedimentary layers. Influx of terrigenous sediments during the Pleistocene formed depocenters in the western and southern parts of the basins. In the Ulleung Interplain Gap, where the Ulleung Basin joins the deeper Japan Basin, sediment waves suggesting bottom current activities are seen.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.519-524
• /
• 2000

The goal of this research is the establishment of a connection of an existing water quality model to GIS. The water quality model investigated was the Water Quality Analysis Simulation Program (WASP5), while the actual linkage was performed using object-oriented programming. The runoff and the non-point source loadings into the Channel were determined using a grid-based model developed in GIS. Afterwards, scripts were written in the ArcView programming language, Avenue, in order for ArcView to perform the following tasks : 1) write the input file informations, 2) format the input information into the proper WASP5 file, 3) execute the WASP5 subprogram for modeling.

• Journal of Korea Water Resources Association
• /
• v.37 no.4
• /
• pp.329-339
• /
• 2004

The main objective of this study is to develop a GIS-based two-dimensional model for the simulation of rainfall-runoff process and overland flow of a watershed. The tasks of this study are summarized: to develop a two-dimensional model for overland flow and to construct a rainfall-runoff simulation system linked with GIS. The mathematical formulation of the model incorporates four parts: spatially varied rainfall, spatially distributed infiltration, 1-directional, 4-directional and 8-directional overland flow routing scheme, and one-dimensional channel routing scheme. For the development of stochastic model, Monte Carlo simulation method has been directly integrated into the model. GIS using Arc/Info and ArcView has been applied to prepare the model input data(elevation, soil type, rainfall data, etc.) for a simulation and to demonstrate the simulation results.