Browse > Article
http://dx.doi.org/10.3744/SNAK.2007.44.6.598

A Study on the Prediction of Welding Distortion and Residual Stress for Channel I Butt SA Weldment Using FE Analysis  

Shin, Dae-Hee (Hull Design Department, Hyundai Heavy Industries, Co., Ltd.)
Shin, Sang-Beom (Industrial Research Institute, Hyundai Heavy Industries, Co., Ltd.)
Lee, Joo-Sung (School of Naval Architecture and Ocean Engineering, University of Ulsan)
Publication Information
Journal of the Society of Naval Architects of Korea / v.44, no.6, 2007 , pp. 598-604 More about this Journal
Abstract
The purpose of this study is to establish the predictive method of welding distortion and residual stress for the channel I butt SA (submerged arc) weldment using FEA. In order to do it, the heat input model for the weldment was defined as the combined heat source with the surface heat flux of gaussian distribution and volumetric heat source uniformly distributed within weld groove by comparing the shapes of molten pool and temperature distribution obtained by FEA with those of experiments. The arc efficiency of SA welding for two-dimensional FE analysis was evaluated as 0.85. The welding distortion and residual stress of the weldment obtained by FEA and heat input model proposed have a good agreement with those obtained by experiment. Based on the results, it was suggested that the proper heat input model should be required to evaluate the welding distortion for weldment.
Keywords
Heat input model; Combined heat source; Welding Distortion; Residual stress; SAW;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Dong, P. and Janosch, 2002, 'Residual Stress Compendium Compilation: Draft Protocol and Call for Participation,' IIW Doc. IIW-X-XII-XV-RSDP-43-02
2 Anderson, B.A.B., 1978, 'Thermal Stress in a Submerged-Arc Welded Joint Considering Phase Transformations,' Trans. of ASME, Vol. 100, pp. 356-362   DOI   ScienceOn
3 Conrnady, C. and Dull, R., 1997. 'Control Distortion in Thin Ship Panels,' Journal of Ship Production, May, 1997, pp. 83-92
4 대한용접학회 용접강도연구위원회, 2005, 'FEA를 이용한 Arc 용접부의 온도 분포 예측 표준,' Vol. 23, No. 6, pp. 497-508
5 장창두, 이창현, 2000, '선체 블록의 용접변형 예측 및 제어를 위한 연구,' 대한조선학회 논문집, 제 37권, 제 2호, pp. 127-136   과학기술학회마을
6 서승일, 2005, '박판구조물의 용접 면외변형에 대한 이론 해석적 접근,' 대한조선학회 논문집, 제 42권, 제 5호, pp. 466-471   과학기술학회마을   DOI
7 신상범, 김경규, 윤중근, 2004, '자동 용접부 회전 변형에 미치는 가접의 영향,' Proceedings of the KWS Conference 2004, pp. 289-291   과학기술학회마을
8 이주성, 2004, '평블록의 용접변형예측 시뮬레이터,' 대한조선학회 논문집, 제 41권, 제1호, pp. 55-63   과학기술학회마을
9 Incropera F.P. and Dewitt, D.P. 'Introduction to Heat Transfer,' 2nd Edition, Wiley
10 McAdams, 1954, Heat Transmission:, 3rd ed., McGraw-Hill, Chapter 7