• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.309-316
• /
• 2021

Due to the rigid nature of the silicon carbide fiber(SiC), fiber damage occurs from the friction during the carding process. This damage not only lowers the spun yarn yield, but also lowers the heat resistance of the spun yarn, so that ultra-high heat resistant yarn cannot be manufactured. Therefore, in the carding process where the most friction between fiber and machine(wire, etc.) occurs, some factors were modified and tested, and as a result of measuring the change in physical properties, fiber damage decreased due to the wire angle or wire density, resulting in improved yield. The test method used to measure the yield of SiC fiber was the carbonization method, and the content of SiC fibers was calculated using the remaining amount after carbonization. Carbonization test was performed at air condition, 700℃, and for 2 hours. Analysis by SEM-EDX showed that the carbide was consistent with the composition of the SiC fiber.

• 한국공간구조학회논문집
• /
• 제23권1호
• /
• pp.77-84
• /
• 2023

In this study, the performance evaluation of the RC frame specimen (RV2) which was strengthened by a steel frame and a steel damper with the lateral deformation prevention details proceeded. The comparison objects are bare frame specimen (BF), RV2 and AWD, where AWD is a specimen reinforced with steel damper and aramid fiber sheets. In the evaluation of envelope curve, stiffness degradation, and energy dissipation capacity, RV2 was evaluated to have excellent capacity as a whole. To evaluate the strengthening effect of the steel frame based on the maximum strength and energy dissipation capacity, it was evaluated to have a 38% of the RV2's capacity.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 추계학술대회 논문요약집
• /
• pp.210-210
• /
• 2003

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2009년도 학술발표대회
• /
• pp.154-155
• /
• 2009

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2010년도 제3회 국제학회
• /
• pp.110-110
• /
• 2010

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2010년도 제3회 국제학회
• /
• pp.86-87
• /
• 2010

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2007년도 추계학술발표회
• /
• pp.145-146
• /
• 2007

• 전산구조공학
• /
• 제36권3호
• /
• pp.17-22
• /
• 2023

• 콘크리트학회논문집
• /
• 제21권2호
• /
• pp.159-168
• /
• 2009

본 연구에서는 기존의 연구방법을 개선한 프리스트레스가 도입된 아라미드 스트랩으로 횡 구속된 RC 원형기둥의 일축압축 거동에 대하여 강도와 변위에 의한 강성 및 구속효과에 대하여 연구하였으며, 그 프리스트레싱 보강방법 및 과정에 대하여 비교적 상세히 소개하였다. 이 방법으로 보강된 기둥의 파괴형태는 초기 능동 구속압의 작용으로 인하여 변위 증가율이 매우 낮으며 이후 최종 파괴시까지도 그 형상이 유지되는 매우 안정적인 파괴형태를 보이게 된다. 파괴하중 비교 결과 일반 RC 기둥과 비교하여 73% 이상 강도증진 효과를 나타내었다. 또한 변형 증가율이 매우 작으며 이로 인한 변위구속효과가 매우 우수함을 확인할 수 있었다. 기존의 보강방법 (CFS, GFS)과의 비교를 통하여, 상대적으로 작은 면적으로 우수한 강도증진을 보이며 강성증가로 인한 구속효과 역시 우수하며 체적 증가율도 팽창하지 않는 결과를 보였다. 특히, 콘크리트 팽창 이후부터 발휘되는 기존 방법의 구속효과와는 달리, 초기부터 도입되는 프리스트레스트 긴장력에 의한 초기변형 구속효과가 매우 탁월하며, 최종 파괴시까지 체적 변형률이 팽창하지 않는 안정적인 결과를 나타낸다.

• 대한기계학회논문집A
• /
• 제25권8호
• /
• pp.1277-1286
• /
• 2001

Aluminum 5052/Aramid Fiber Reinforced Plastic(Al5052/AFRP) laminates are applied to the fuselage-wing intersection. The Al5052/AFRP laminates suffer from the cyclic bending moment of variable amplitude during the service. Therefore, the influence of cyclic bending moment on the delamination and the fatigue crack propagation behavior in Al5052/AFRP laminate was investigated in this study. Al5052/AFRP laminate composite consists of three thin sheets of Al5052 and two layers of unidirectional aramid fibers. The cyclic bending moment fatigue tests were performed with five different levels of bending moment. The shape and size of the delamination zone formed along the fatigue crack between Al5052 sheet and aramid fiber-adhesive layer were measured by an ultrasonic C-scan. The relationships between da/dN and ΔK, between the cyclic bending moment and the delamination zone size, and between the fiber bridging mechanism and the delamination zone were studied. Fiber failures were not observed in the delamination zone in this study. It represents that the fiber bridging modification factor should turn out to increase and that the fatigue crack growth rate should decrease. The shape of delamination zone turns out to be semi-elliptic with the contour decreased non-linearly toward the crack tip.