• 제목/요약/키워드: aragonite

검색결과 93건 처리시간 0.036초

일부 지하수에서 얻은 Aragonite의 특성과 BALB/3T3 세포에 대한 세포독성, 세포분열장애 및 형태학적 변이유발 (Characteristics of Aragonite From Underwater and The Cytotoxicity, Cell Division Disturbance and Induction of Morphological Transformation on BALB/3T3 Cells)

  • 홍윤철;이훈재
    • 한국환경성돌연변이발암원학회지
    • /
    • 제16권1호
    • /
    • pp.35-42
    • /
    • 1996
  • Aragonite is one of polymorphs of calcium carbonate of which main form is calcite. We found that white precipitate is formed in much amount by boiling underwater of Inchon, Korea and confirmed that it is aragonite. This study is to evaluate the dimensional characteristics, solubility, acid resistance of aragonite and the cytotoxicity, cell division disturbance and cell transforming ability of it on BALB/3T3 cells. The results are as follows: Lengths of the aragonite were reduced to the 72.7% and 22.7% respectively after 5 months and 7 months of intrapleurai injection to the Sprague-Dawley rat. Strong acid such as 1M HCl dissolved the aragonite instantly but weaker acid pH 2.0 or more could not dissolved aragonite easily. The result of cell growth inhibition showed that cell numbers were decreased as log-doses of treatment of the aragonite were increased 24 hours, 48 hours, and 72 hours later. Cell plating efficiency after the aragonite treatment also showed dose-dependent decrease. Multinuclear giant cell formation was increased in the aragonite treated cells until ID$_{50}$ and after the dose the multinucleate cells were decreased, but remained much higher than negative control cells. Morphological transformation assay showed that the aragonite did not induce transformation in all treated doses.

  • PDF

A Brief review of Aragonite Precipitated Calcium Carbonate (PCC) Synthesis Methods and Its Applications

  • Ramakrishna, Chilakala;Thenepalli, Thriveni;Ahn, Ji Whan
    • Korean Chemical Engineering Research
    • /
    • 제55권4호
    • /
    • pp.443-455
    • /
    • 2017
  • This article provides an exclusive overview of the synthesized aragonite precipitated calcium carbonate and its applications in various fields. The last decade has seen a steady increase in the number of publications describing the synthesis, characterization and applications of calcium carbonate morphologies. Mainly, two kinds of processes have been developed for the synthesis of aragonite precipitated calcium carbonate under controlled temperature, concentrations and aging, and the final product is single-phase needle-like aragonite precipitated calcium carbonate formed. This review is mainly focused on the history of developed methods for synthesizing aragonite PCC, crystal growth mechanisms and carbonation kinetics. Carbonation is an economic, simple and ecofriendly process. Aragonite PCC is a new kind of functional filler in the paper and plastic industries, nowadays; aragonite PCC synthesis is the most exciting and important industrial application due to numerous attractive properties. This paper describes the aragonite PCC synthetic approaches and discusses some properties and applications.

Preparation of Needle like Aragonite Precipitated Calcium Carbonate (PCC) from Dolomite by Carbonation Method

  • Ramakrishna, Chilakala;Thenepalli, Thriveni;Huh, Jae-Hoon;Ahn, Ji Whan
    • 한국세라믹학회지
    • /
    • 제53권1호
    • /
    • pp.7-12
    • /
    • 2016
  • In this paper, we have developed a simple, new and economical carbonation method to synthesize a pure form of aragonite needles using dolomite raw materials. The obtained aragonite Precipitated Calcium Carbonate (PCC) was characterized by XRD and SEM, for the measurement of morphology, particle size, and aspect ratio (ratio of length to diameter of the particles). The synthesis of aragonite PCC involves two steps. At first, after calcinated dolomite fine powder was dissolved in water for hydration, the hydrated solution was mixed with aqueous solution of magnesium chloride at $80^{\circ}C$, and then $CO_2$ was bubbled into the suspension for 3 h to produce aragonite PCC. Finally, aragonite type precipitated calcium carbonate can be synthesized from natural dolomite via a simple carbonation process, yielding product with average particle size of $30-40{\mu}m$.

Aragonite의 제조에 관한 연구 (Ⅰ). 주상형 아라고나이트의 생성 (Studies on the Preparation of Aragonite (Ⅰ). Formation of Aragonite of Pillar Shape)

  • 박성식;하호;이희철
    • 대한화학회지
    • /
    • 제39권7호
    • /
    • pp.578-584
    • /
    • 1995
  • $Sr(OH)_2$가 소량 첨가된 수산화칼슘 수용액에 $CO_2$ 가스를 흡수시켜 탄산화 반응을 행하였으며, 이 반응에서 반응온도와 $Sr(OH)_2$가 탄산화반응에 미치는 영향을 조사하였다. 주상형의 aragonite는 반응온도가 높을수록, $Sr(OH)_2(aq)/Ca(OH)_2(aq)$의 비가 클수록, 즉 $OH^-/CO_2(aq)$의 비가 클수록, 잘 생성되었다. $Sr(OH)_2$는 탄산화반응 초기에 aragonite와 유사한 사방정형의 $SrCO_3$를 쉽게 형성하고, 물에 대한 용해도가 높기때문에 $OH^-$ 이온을 증가시켜 용액내에 결정성장에 유리한 $CO_3^{2-}$ 이온을 보다 쉽게 형성시키므로 주상형 aragonite 생성에 유리한 역할을 하였다.

  • PDF

고분자 첨가에 의한 탄산칼슘의 상 변화 (Phase Change of Calcium Carbonate by Adding Polymers)

  • 한현각;전제성;김미선
    • Korean Chemical Engineering Research
    • /
    • 제50권2호
    • /
    • pp.300-303
    • /
    • 2012
  • 침전탄산칼슘 결정화계에서 첨가제인 ethylenediaminetetraacetic acid(EDTA), diethylene triaminepentaacetic acid(DTPA), citric acid(CIT), pyromellitic amid(PMA) 첨가에 의한 탄산칼슘 결정의 형상 변화를 연구하였다. 첨가제를 넣지 않았을 때 낮은 온도 $20^{\circ}C$에서는 calcite 결정이 생성되었고, 높은 온도 $80^{\circ}C$에서는 aragonite 결정이 생성되었으며 EDTA와 DTPA 첨가에 의한 40, $60^{\circ}C$ 중간온도에서는 aragonite 결정이 생성됨을 알 수 있었다. CIT와 PMA 첨가에 의해 aragonite의 성장이 지연되었으며 calcite 단일상이 나타났다. 첨가제가 단일상의 탄산칼슘을 만드는데 중요한 요소임이 발견되었다.

연속식 결정화기에서 온도와 교반속도에 의한 탄산칼슘 결정의 형상변화 (Phase Changes of Calcium Carbonate by Temperature and RPM in Continuous Crystallizer)

  • 신윤정;한현각
    • Korean Chemical Engineering Research
    • /
    • 제57권5호
    • /
    • pp.666-671
    • /
    • 2019
  • 탄산칼슘은 칼사이트, 바테라이트, 아라고나이트 3개의 상이 있다. 칼사이트와 아라고나이트는 열역학적으로는 바테라이트 보다 안정하다. 연속식결정화기에서 탄산나트륨과 염화칼슘 용액반응으로 아라고나이트 결정 제조공정에서 온도와 혼합속도 영향에 대하여 연구하였다. 회분식결정화기에서 칼사이트는 상대적으로 낮은 온도($40^{\circ}C$ 아래)에서 생성되지만, 아라고나이트는 높은 온도에서 발견된다. 혼합속도가 100 rpm인 연속식결정화기에서, 아라고나이트는 어떤 반응온도에서도 발견할 수 없었다. 그러나 혼합속도가 300 rpm, 500 rpm으로 증가하면, 칼사이트와 아라고나이트의 비는 온도가 증가하면서 증가하였다.

Aragonite의 제조에 관한 연구 (Ⅱ) 소석회 현탁액의 탄산화반응에 의한 주상형 아라고나이트 생성 (Studies on the Preparation of Aragonite (Ⅱ): Formation of Pillar Aragonite by the Carbonation of Slake Lime Suspension)

  • 박성식;이희철;전상문
    • 대한화학회지
    • /
    • 제39권11호
    • /
    • pp.869-877
    • /
    • 1995
  • 정선산 소석회($(Sr(OH)_2=0.053 wt%)$) 현탁액을 사용하여 반응온도 30-80$^{\circ}C$에서 $CO_2$가스를 흡수시키는 탄산화로 aragonite의 생성과정을 조사하였다. 반응초기에 사방정형 $SrCO_3$ 핵을 생성하고, 이 핵은 기-액 경계면의 액체경막에서 핵 성장에 유리한 $CO_3^{2-}$(aq)이 작용하여 종결정aragonite로 성장하고, 반응종료시 주상형 aragonite를 생성하였다. 반응온도 40$^{\circ}C$에서는 $CO_2$(aq)의 농도를 조절하여 반응초기에 생성된 SrCO/sub 3/ 핵을 중심으로 성장시켜 aragonite를 생성하였다. 그리고 이리산 소석회$(OH)_2/=0.011 wt%$) 현탁액에 소량의 $Sr(OH)_2$을 첨가하고, $OH^-$(aq)와 $CO_2$(aq)의 농도를 조절한 탄산화 반응으로 단경 0.1-0.2${\mu}m$, 장경 1-2${\mu}m$의 주상형 aragonite을 합성하였다.

  • PDF

탄산칼슘결정 생성에서 온도와 PAA 영향 (Influence of Temperature and PAA(PolyAcrylic Acid) Solution in the Formation of Calcium Carbonate Crystal)

  • 한현각;김보미;김진아
    • Korean Chemical Engineering Research
    • /
    • 제46권6호
    • /
    • pp.1052-1056
    • /
    • 2008
  • 소다 공정에서 탄산칼슘 결정의 평균입경과 형상 변화를 온도변화와 PAA 용액의 첨가에 대하여 연구하였다. 낮은온도($30^{\circ}C$, $60^{\circ}C$)에서는 Calcite 결정을, 높은 온도($80^{\circ}C$)에서는 Aragonite 결정을 얻었다. $30^{\circ}C$$80^{\circ}C$에서 용액에 PAA 용액을 첨가하여도 결정의 형상변화는 없었다. 중간온도($60^{\circ}C$)에서 PAA 용액을 첨가하여 Aragonite 결정을 얻었다. 결정의 형상변화가 PAA 분자 첨가로 인하여 일어났다. PAA 용액의 농도가 높을수록, 더 많은 Aragonite 결정을 얻었다. PAA 수용액의 농도가 높고 분자량이 클수록 탄산칼슘 결정의 평균입경은 증대하였으며, 형상변화가 일어나는 영역에서는 PAA의 분자량이 평균입경변화에 중요한 변수가 된다.

Formation Mechanism of Aragonite by Substitute of Mg2+ Ions

  • Choi, Kyung-Sun;Park, Jin-Koo;Ahn, Ji-Whan;Kim, Hwan
    • 한국세라믹학회지
    • /
    • 제41권12호
    • /
    • pp.889-892
    • /
    • 2004
  • Acicular type aragonite precipitated calcium carbonate was synthesized by carbonation reaction of $Ca(OH)_2$ slurry and $CO_2$ gas. As increasing the initial concentration of $Mg^{2+}$ ion, calcite crystal phase substantially decreased while that of aragonite crystal phase increased. According to XRD and EDS analysis, it was found that the addition of $MgCl_2$ induced the $Mg^{2+}$ ion to substitute in $Ca^{2+}$ ion site of calcite lattice then the unstabled calcite structure be resolved, consequently the growth of calcite structure is interrupted while the growth of aragonite structure is expedited.

Precipitated Calcium Carbonate Synthesis by Simultaneous Injection to Produce Nano Whisker Aragonite

  • Ramakrishna, Chilakala;Thenepalli, Thriveni;Huh, Jae-Hoon;Ahn, Ji Whan
    • 한국세라믹학회지
    • /
    • 제53권2호
    • /
    • pp.222-226
    • /
    • 2016
  • The synthesis of pure calcium carbonate nanocrystals was achieved using a simultaneous injection method to produce nano particles of uniform size. These were characterized using scanning electron microscopy and powder X-ray diffraction. The nano particles were needle-shaped aragonite polymorphs, approximately 100-200 nm in length. The aragonite polymorph of calcium carbonate was prepared using aqueous solutions of $CaCl_2$ and $Na_2CO_3$, which were injected simultaneously into double distilled water at $50^{\circ}C$ and then allowed to react for 1.5 h. The resulting whisker-type nano aragonite with high aspect ratio (30) is biocompatible and potentially suitable for applications in light weight plastics, as well as in the medical, pharmaceutical, cosmetic and paint industries.