• Korean Chemical Engineering Research
• /
• 제47권2호
• /
• pp.185-189
• /
• 2009

10 wt% 암모니아수 흡수제에서 이산화탄소 흡수속도를 교반셀 반응기를 이용하여 293~337 K 범위에서 측정하였다. 암모니아 흡수제와 이산화탄소의 반응속도를 아레니우스 식으로 나타내었으며 활성화에너지는 50.42 kJ/mol였다. 2-Amino-2-methyl-1-propanol(AMP), 2-amino-2-methyl-1,3-propandiol(AMPD), 2-amino-2-ethyl-1,3-propandiol(AEPD)의 입체장애아민 첨가제가 1 wt% 함유된 흡수제에서의 이산화탄소 흡수속도를 측정하였다. 아민 첨가제들은 흡수속도에 영향을 주었으며 1 wt%의 AMP를 첨가한 경우 반응속도 상수는 약 53% 증가하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권5호
• /
• pp.818-826
• /
• 2004

The spray-induced mixing characteristics and thermal decomposition of aqueous urea solution into ammonia have been studied to design optimum sizes and geometries of the mixing chamber in SCR(Selective Catalytic Reduction) system. The cold flow tests about the urea-injection nozzle were performed to clarify the parameters of spray mixing characteristics such as mean diameter and velocity of drops and spray width determined from the interactions between incoming air and injected drops. Discrete particle model in Fluent code was adopted to simulate spray-induced mixing process and the experimental results on the spray characteristics were used as input data of numerical calculations. The simulation results on the spray-induced mixing were verified by comparing the spray width extracted from the digital images with the simulated Particle tracks of injected drops. The single kinetic model was adopted to predict thermal decomposition of urea solution into ammonia and solved simultaneously along with the verified spray model. The hot air generator was designed to match the flow rate and temperature of the exhaust gas of the real engines The measured ammonia productions in the hot air generator were compared with the numerical predictions and the comparison results showed good agreements. Finally, we concluded that the design capabilities for sizing optimum mixing chamber were established.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.311-312
• /
• 2003

Activated carbons (ACs) are widely used in adsorption for the removal of gaseous and aqueous pollutants[1]. Although a wide range of carbonaceous materials can be converted into ACs, the coal and lingocellulosic materials are the most commonly used starting materials for the production of commercial ACs. Recently, there are a quite large number of studies regarding the preparation of ACs from various polymeric materials because of high carbon yield and low ash content In this work, ACs are prepared from polystyrene (PS) by chemical activation with potassium hydroxide and the effect of the KOH-to-PS ratio to adsorption of ammonia is investigated. (omitted)

• 한국전기전자재료학회논문지
• /
• 제31권3호
• /
• pp.177-181
• /
• 2018

We prepared ZnS thin films via chemical bath deposition (CBD) in an aqueous solution of ammonia ($NH_3$) and hydrazine ($N_2H_4$). The composition ratio of hydrazine used was 0%, 17%, 22%, 29%, or 50%. We investigated the effects of hydrazine and ammonia on the growth, and the structural and optical properties of ZnS in terms of surface uniformity, voids, and grain size. We found that during the growth of ZnS films, hydrazine was very effective for improving the surface morphology and layer uniformity with fast layer formation, while it had no effect on the bandgap energy, $E_g$.

• 설비공학논문집
• /
• 제15권10호
• /
• pp.828-834
• /
• 2003

A diffusion absorption refrigerator is a heat-generated refrigeration system. It uses a three-component working fluid consisting of the refrigerant (ammonia), the absorbent (water) and the auxiliary gas (hydrogen or helium). In this study, experimental investigations have been carried out to examine the effects of charging conditions of working fluids on the evaporating temperature for diffusion absorption refrigerator. Experimental parameters considered in the present experiments are charging concentration, solution charge and system pressure determined by auxiliary gas charged. As a result, in the charging condition of 35% of concentration and 20 kg$_{f}$cm$^2$ of system pressure, the system has the lowest evaporating temperature. It was found that there exists a minimum value of solution charge for the operation of diffusion absorption refrigerator.r.

• Bulletin of the Korean Chemical Society
• /
• 제22권12호
• /
• pp.1309-1315
• /
• 2001

Zirconium sulfate supported on zirconia catalysts were prepared by impregnation of powdered $Zr(OH)_4$ with zirconium sulfate aqueous solution followed by calcining in air at high temperature. The characterization of prepared catalysts was performed using Fourier transform infrared (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and by the measurement of surface area. The addition of zirconium sulfate to zirconia increased the phase transition temperature of $ZrO_2$ from amorphous to tetragonal due to the interaction between zirconium sulfate and zirconia, and the specific surface area and acidity of catalysts increased in proportion to the zirconium sulfate content up to 10 wt% of $Zr(SO_4)_2$. Infrared spectra of ammonia adsorbed on $Zr(SO_4)2}ZrO_2$ showed the presence of Bronsted and Lewis acid sites on the surface. $10-Zr(SO_4)_2}ZrO_2$ calcined at $600^{\circ}C$ exhibited maximum catalytic activities for 2-propanol dehydration and cumene dealkylation. The catalytic activities for both reactions were correlated with the acidity of catalysts measured by ammonia chemisorption method.

• Korean Chemical Engineering Research
• /
• 제51권1호
• /
• pp.53-57
• /
• 2013

해수담수화장치에서 배출되는 농축수로부터 희소금속인 리튬을 추출하는 공정을 개발하기 위한 선행 연구로, 용매추출제 TTA와 TOPO를 사용하여 수용액 중의 리튬이온을 추출하는 연구를 수행하였다. 추출제의 농도, 유기용매의 종류, 추출액과 수용액의 비, 수용액의 pH 및 알칼리제 종류 등을 변화시키면서 리튬 이온의 용매추출에 미치는 영향을 조사하였다. 해수의 주요 성분인 염화나트륨의 첨가가 리튬 이온의 용매추출에 미치는 영향도 함께 조사하였다. 리튬 추출의 최적 조건은 추출제 농도는 TTA 0.02 M, TOPO 0.04 M, 유기용매는 케로센, pH는 10.2~10.6 이었으며, 알칼리제로는 암모니아 수용액을 사용한 경우 리튬이온의 추출효율이 가장 높았다. 또한 염화나트륨을 첨가하여 리튬 용매추출을 진행한 결과 염화나트륨은 리튬이온의 추출을 방해하는 것을 알 수 있었다.

• 대한화학회지
• /
• 제11권2호
• /
• pp.56-59
• /
• 1967

Ligand Exchange를 원리로 하여 Nickel Ion을 포함하고 있는 Chelating Resin인 dowex A-1을 써서 Elution Chromatography에 의하여 Amine의 혼합물을 분리하는 방법을 기술하였다. 이 실험에서 암모니아 수용액을 Eluent로 썼다. 이 방법은 특히 방향족아민의 분리에 효과 있음을 알게 되었다.

• Korean Chemical Engineering Research
• /
• 제51권3호
• /
• pp.335-341
• /
• 2013

목질계 바이오매스인 옥수수대 전처리를 위하여 고안된 순환식 암모니아 전처리 반응기(Ammonia Circulation Reactor (ACR))를 이용하여 연구하였다. 이 전처리 방법은 적은 양의 액체를 사용하도록 고안되었으며 이 연구에선 기존의 전처리 공정보다 낮은 전처리 온도($60{\sim}80^{\circ}C$), 반응시간(4~12 hour) 그리고 고체:액체 비율(1:3~1:8) 등의 공정 조건을 실험 하여 효과를 비교하였다. 즉 여러 공정 조건에서 전처리 후 고형물의 잔류 고체량, 당, Lignin 함량, 그리고 효소당 화율 등을 측정하였다. 여러 실험 조건에서 공통적으로 관찰된 것은 전처리 조건이 더 가혹해 지면 Lignin의 제거율이 가장 큰 영향을 받았으며, 47.6~70.6% 범위로 나타났다. 반면 다른 당(Glucan, Xylan)은 손실이 비교적 작게 나타났다. 모든 실험 조건에서, 전처리된 고형물의 Glucan 손실율은 4.7~15.2% 범위로 변화가 크지 않았으며 Xylan 손실율은 여러 조건의 변화에 따라 7.4~25.8% 정도 범위로 나타났다. 암모니아 순환 전처리로 8~12 hour 동안 처리된 옥수수대는 90.1~94.5%의 높은 72-h Glucan 당화율을 (15 FPU-GC220+30 CBU)/g-glucan의 효소 투입으로 나타냈으며 순수 Cellulose인 Avicel의 당화율(92.7%)과 비슷하거나 높았다. 또한 8~12 hour 처리된 옥수수대의 초기 24-h Glucan 당화속도는 73.0~79.4%로 Avicel의 같은 시간 당화율인 69.5% 보다 높게 나타났다. 반응시간을 증가는 보다 많은 Lignin을 제거하였으며 따라서 효소 당화율 증가에 기인한 것으로 보인다.

• Macromolecular Research
• /
• 제11권6호
• /
• pp.488-494
• /
• 2003

We have fabricated gelatin-immobilized polyurethane foams (PUFG) by dipping polyurethane foam (PUF) in an aqueous solution containing gelatin and by subsequent reaction with glutaraldehyde after freeze-drying. Gelatin aqueous solutions of different concentrations were used as the dipping solutions to control the amount of immobilized gelatin. The average pore size of PUF decreased with an increase in gelatin concentration. It was found from the hepatocyte adhesion experiment that the amount of hepatocytes seeded on PUFG1, prepared by using a 1% aqueous gelatin solution, was higher than that on other PUFGs. The hepatocytes inoculated in PUFG1, were slightly aggregated as the incubation time increased. The cells inoculated in PUFG1 showed higher ammonia removal ability than those monolayer-cultured on a gelatin-immobilized polystyrene dish (PSG) after 1 and 4 days of incubation time. The inoculated cells exhibited higher albumin secretion relative to monolayer-cultured hepatocytes on PSG. Albumin secretion by hepatocytes seeded on PUFG1 was increased by the presence of serum and was further increased by both the presence of serum and cytokines. The results obtained from a 3-(3,4-dimethylthiazol-2yl)-2,5-diphenyltetrazolium bromide (MTT) assay indicated that PUFG can provide a better microenvironment for hepatocyte culture along with nutrition and metabolite transfer through the high porosity of PUF.