• 상하수도학회지
• /
• 제8권2호
• /
• pp.35-42
• /
• 1994

This study is to analyse probability distribution characteristics of water supply demand. Two cities located near Seoul were selected as study areas. In this study, two probalility distribution types were tested using the K-S(Kolmogorov-Smirnov) method. The K-S method was used to prove the goodness of the selected distribution type. And also, the goodness of maximum day demand to average day demand ratio which was obtained by field data was tested. Conclusions are as follows. 1.Bothl normal distribution type and lognormal distribution type are appropriate as the probalility distribution type for the water supply demand. 2. The probability distribution characteristics can be used to test the goodness of the maximum day to average day demand ratio.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.593-598
• /
• 2005

At-site analysis is not appropriate if the record length is shorter than target return period T. If the record length is longer than 27 years, then at-site analysis may be sufficient(Institute of Hydrology, 1999). However, in such a case, regional frequency analysis is recommended for purpose of comparison. Record lengths of annual maximum rainfall data in Korea are usually shorter than 50 years. It is therefore essential to apply regional frequency analysis for estimating rainfall quantiles of more than 100 years return period. In this research, regional rainfall frequency analysis is performed for hourly rainfall data of South Korea. Homogeneous regions are idntified by clusgter analysis which is a standard method of statistical multivariate analysis for dividing a data set into groups. An appropriate distribution is chosen by goodness-of-fit test. GLO is found to be an appropriate distribution as a result of goodness-of-fit measure (Hosking & Wallis, 1997). Simulation experiments are performed to check the performance of frequency analysis techniques. The effects of discordant sites on quantiles are considered.

• 유통과학연구
• /
• 제20권11호
• /
• pp.109-120
• /
• 2022

Purpose: We would like to identify the appropriate size of stores in the commercial district suitable for the era of low growth. In addition, it is intended to present alternatives to prevent gentrification along with measures to revitalize commercial districts according to the selection of appropriate stores. Research design, data and methodology: The importance and commercial district usage patterns were identified through surveys by consumers and sellers. the demand and size of the commercial area were calculated based on the floating population and resident registration population. In addition, based on this, through metric analysis, the importance of the business district activation plan and what important matters can prevent gentrification were analyzed. Result: In this the study, 555 stores are currently operating in the target area, but it is seen as a commercial district with a scale that can operate 136 stores and 938 stores. In addition, it was analyzed that the Commercial Lease Protection Act needs to be strengthened to prevent gentrification. Conclusions: Due to the nature of small and medium-sized cities in Korea, commercial districts that have once lost their resilience must take much effort to find vitality. It is believed that local commercial districts will have resilience when diagnosis and recovery measures are adequately presented.

• Composites Research
• /
• 제22권3호
• /
• pp.29-34
• /
• 2009

본 논문에서는 유한요소해석을 이용하여 경극 골절부의 변형률 분포를 계산하였다. 16주에 걸친 골절 회복기간 동안 최적의 가골 형성의 조건을 찾기 위해 스테인리스 강 고정판과 다양한 적층순서를 가지는 복합재료 고정판이 고려되었다. 이 연구를 통해 골절부 가골 형성을 촉진하는 $2{\sim}10%$ 변형률을 유발하는 최적 하중 조건을 계산하였다. 해석결과로부터 복합재료 고정판의 경우 최적의 변형률을 가지게 하는 하중조건은 스테인리스 강 고정판의 경우보다 낮았으며, 응력방패 현상을 감소시켜 골절치료에 유리함을 가지는 것을 알 수 있었다.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권5호
• /
• pp.212-216
• /
• 2005

This paper describes the application scheme of resistive HTS-FCL(High Temperature Superconducting-Fault Current Limiter) on future new distribution system. Future new distribution system means the power system to which applies the 22.9kV HTS cable with low-voltage and mass-capacity characteristics replacing the 154kv conventional cable in addition to HTS transformer and HTS-FCL. The fault current of future new distribution system will increase greatly because of the inherent characteristics of HTS transformer/cable and applications of distributed generations and spot networks and so on. This means that the HTS-FCL is necessary to reduce the fault current below the breaking capacity. This paper studies the appropriate location, parameters and the influences of HTS-FCL on future new distribution system. Finally, this paper suggests the reasonable basic parameters of resistive HTS-FCL for future KEPCO new distribution system.

• 경영과학
• /
• 제26권3호
• /
• pp.145-156
• /
• 2009

The probability distribution of the repair process should be determined to choose the optimal spare level of a weapon system with a queueing model. Though most weapon systems have a multi-step repair process, previous studies use the exponential distribution for the multi-step repair process. But the PH distribution is more appropriate for this case. We utilize the PH distribution on a queueing model and solve it with MGM(Matrix Geometric Method). We derive the optimal spare level using the PH distribution and show the difference of results between the PH and exponential distribution.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권1호
• /
• pp.45-51
• /
• 2014

Thermal shock tests at two stress levels were performed to see the life (cycles) of LPF ASSY (low pass filter assembly) at normal stress level. In this case Coffin-Manson relationship is generally used to describe the relationship between the temperature difference and the life, together with the Weibull distribution describing the life at each stress level. So for given data Coffin-Manson is fitted to predict the life at normal stress level. However, different types of models are appropriate for this type of test. Hence, a more appropriate model such as General log-linear model which can also incorporate the duration at the highest and lowest temperatures and acceleration time will be introduced.

• 품질경영학회지
• /
• 제20권1호
• /
• pp.22-32
• /
• 1992

This thesis compares life test acceptance sampling plans under lifetime has an exponential distribution. Various practical considerations may lead a user adopt a two-stage, or double sampling, test procedure. Hewett and Spurrier(1983) provided a survey of two-stage methods, as well as examples of experiments for which a two-stage procedure would be appropriate. The plans are compared in terms of the expected number of failures, and the expected time required to reach a dicision. Computational experiments are conducted and the results are tabulated to provide guidelines for selecting an appropriate plan for a given situation.

• 지식경영연구
• /
• 제11권1호
• /
• pp.37-50
• /
• 2010

Bioharmaceutical technologies have consistently been areas in which large licensing agreements have been negotiated. However, there are very limited informations in the open literature on how its running royalty rates are determined and no specific methods are yet provided. The purpose of this study is to suggest an appropriate method for the estimation of running royalty of bioharmaceutical technology in licensing agreements. Here distribution of risk-adjusted operating margins are obtained by simulation using statistics of success rates in the stage of clinical trials and profit margins. Three factors based on technology, business and license legal terms are considered and combined as licensing competitiveness level. Finally, reasonable running royalty is estimated by combining simulated distribution and licensing competitiveness level. This suggested method is expected to practically useful for licensor to establish an appropriate running royalty rate for licensing.

• 설비공학논문집
• /
• 제16권2호
• /
• pp.111-120
• /
• 2004

The optimal design method of indoor thermal environment using CFD coupled simulation and genetic algorithms (GA) is developed in this study. CFD could analyze the thermal environment considering the distribution of temperature, velocity, etc. in a room. Therefore, It would be appropriate to use CFD for the optimal design method considering their distribution. In this paper, the optimal design means the most appropriate boundary conditions of the room among the conditions where the design target of indoor therm environment is achieved. Two step optimal indoor thermal environment design method is proposed. It includes the GA for searching the optimal indoor thermal environment design. To examine the performance of this method, the optimal design of hybrid ventilation system, which uses the natural cross ventilation and the radiation-cooling panel is conducted. The optimal design which satisfies the design target (thermal comfort, minimum cooling load, minimum vertical temperature difference) is found using two step optimal design method.