• Horticultural Science & Technology
• /
• v.28 no.3
• /
• pp.335-342
• /
• 2010

Sulforaphane (SFN) and total phenolics (TPC) contents and antioxidant activity (AA) were analyzed from 13 radish genotypes (Rhaphanus sativus L.), cultivated at 3 locations with different altitudes (Gangneung: asl 5 m, Jinbu: asl 550 m, and Daegwallyeong: asl 750 m). SFN varied greatly from 0.1 to $120.5{\mu}g{\cdot}g^{-1}$ in dry weight test and was significantly affected by location ($P{\leq}0.001$), genotype ($P{\leq}0.001$) and $location{\times}genotype$ interaction ($P{\leq}0.01$). Radishes, cultivated at Daegwallyeong site, showed higher SFN than those of other locations. Among different genotypes, the root of 'Black radish' and leaves of 'Purunmu' of Daegwallyeong had the highest SFN (107.8 and $120.5{\mu}g{\cdot}g^{-1}$, respectively). TPC in root was affected by genotype ($P{\leq}0.001$), and $location{\times}genotype$ interaction ($P{\leq}0.01$), but not by location. In leaves, TPC was affected by location ($P{\leq}0.01$), genotype ($P{\leq}0.001$), and $location{\times}genotype$ interaction ($P{\leq}0.001$). AA expressed as electron donating ability was significantly influenced by location, genotype and $location{\times}genotype$ interaction and correlated positively with TPC ($Pearson's$ $r$=0.897) in root. These results suggest that radish could be a good source of functional food and high altitude location such as Daegwallyeong has potential for the production of radish with high content of health promoting factors.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.78-83
• /
• 2014

In this research, we evaluated the performance and characteristics of carbon supported PtM (M = Ni and Y) alloy catalysts (PtM/Cs) synthesized by a modified polyol method. With the PtM/Cs employed as a catalyst for the oxygen reduction reaction (ORR) of cathodes in proton exchange membrane fuel cells (PEMFCs), their catalytic and ORR activities and electrical performance were investigated and compared with those of commercial Pt/C. Their particle sizes, particle distributions and electrochemically active surface areas (EAS) were measured by TEM and cyclic voltammetry (CV), while their ORR activity and electrical performance were explored using linear sweeping voltammetries with rotating disk electrodes and rotating ring-disk electrodes as well as PEMFC single cell tests. TEM and CV measurements show that PtM/Cs have the compatible particle size and EAS with Pt/C. When it comes to ORR activity, PtM/C showed the equivalent or better half-wave potential, kinetic current density, transferred electron number per oxygen molecule and $H_2O_2$ production(%) to or than commerical Pt/C. Based on results gained by the three electrode tests, when the PEMFC single cell tests were carried out, the current density measured at 0.6 V and maximum power density of PEMFC single cell adopting PtM/C catalysts were better than those adopting Pt/C catalyst. It is therefore concluded that PtM/C catalysts synthesized by modified polyol can result in the equivalent or better ORR catalytic capability and PEMFC performance to or than commercial Pt/C catalyst.

• Journal of Legislation Research
• /
• no.41
• /
• pp.337-366
• /
• 2011

In this article, I intend to analyze the definition of an employee under the Trade Union Act in Japan. Recently, the Supreme Court of Japan held that not only opera singer but also customer engineer is an employee under the Act. Conclusions are as follows:First, it is noteworthy that the Supreme Court reaffirmed the principle of all circumstances established by CBC case. The case focused on deciding that who is an employee under the Act. Notwithstanding this holding of the Supreme Court, district courts and courts of appeals, in deciding this kind of question, have emphasized especially on the side of a legal right and obligation on a contract between an employer and a potential employee. Therefore an independent contractor has not been generally recognized as an employee under the Act. However, even though he or she was, as an independent contractor in name, offering its work to his or her putative employer, the Supreme Court applied the principle of all circumstances to both cases and held in favor on the workers on April, in 2011. Second, the Supreme Court failed to make a general legal principle for deciding that who is an employee under the Act. According to the above holdings of the Supreme Court, nobody can anticipate wether he or she is an employee or not in a concrete case. Finally, the Supreme Court did not also make its opinion clearly about the relations between an employee of the Section 3 of the Act and an employee whom an employer employs under the Section 7(2) of the Act. In conclusion, it can be said that the Supreme Court has narrowly and strictly interpreted an employee of the Section 3. That is to say, only where an employee is recognized as an employee of the Section 7(2), the employee will be also an employee of the Section 3. In Japan, however, the majority interprets that an employee by the Section 3 should be distinguished from the employee whom an employer employs by the Section 7(2). Consequently, according to the majority opinions, unemployed persons, students and citizens will be also included in the definition of an employee by the Section 3.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.4
• /
• pp.315-324
• /
• 2015

In this study, we prepared liquid crystal emulsion composed of amphiphilic substance $C_{14-22}$ alcohol, $C_{12-20}$ alkyl glucoside, behenyl alcohol and studied liquid crystal emulsion of properties and in vitro skin permeation. The results of formulation experiments, the clear liquid crystalline structure was observed in the ratio of $C_{14-22}$ alcohol 0.8%, $C_{12-20}$ alkyl glucoside 3.2%, behenyl alcohol 4% in the formulation. The results of physical property measurements, the viscosity of liquid crystal emulsion and O/W emulsion applied as a control group was respectively $1871.26{\sim}1.15Pa{\cdot}s$, $1768.69{\sim}1.14Pa{\cdot}s$ and the shear stress of O/W emulsion was 178.68 ~ 909.18 Pa, that of liquid crystal emulsion was 190.45 ~ 919.38 Pa. The storage modulus of O/W emulsion was 3428.53 ~ 9157.45 Pa, that of liquid crystal emulsion was 4487.82 ~ 8195.59 Pa. The tan (delta) value of O/W emulsion which means a ratio of viscosity to elasticity was 0.43 ~ 0.19, and that of liquid crystal emulsion was 0.23 ~ 0.25. The water content value on the skin for liquid crystal emulsion was significantly higher from 1 h to 6 h compared with that of O/W emulsion and the transepidermal water loss on the skin was significantly superior in skin moisture loss suppression from 30 min to 4 h compared with that of O/W emulsion. The results of skin permeation using glycyrrhizic acid, the result of skin permeation amount of liquid crystal emulsion for 24 h was $64.58{\mu}g/cm^2$, that of O/W emulsion was $37.07{\mu}g/cm^2$, that of butylene glycol solution was $41.05{\mu}g/cm^2$. Hourly permeability results, it is showed that skin penetration effect of the liquid crystal emulsion increases after 8 h. These results suggest that liquid crystal emulsions are effective for skin moisturizing effect and function as potential efficacy ingredient delivery system for the transdermal delivery.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.5
• /
• pp.371-378
• /
• 2009

This study was carried out to investigate the improvement effect of soil fertility by incorporation of GMC(green manure crops) at rice cropping after cultivation GMC such as the barley for alternative rye in paddy field over the past two years(2006~2007). Plots, which consisted of incorporation time of GMC as rye; heading stage, barley; heading stage, heading stage of rye and 10days after heading stage were divided by amount of applied rates; standard fertilizer fertilization, diagnosis fertilization and non-fertilization. we investigated change of soil physico-chemical properties, degree of decomposition on GMC in soil, growth and yield potential. The obtained results were summarized as follows. The fresh weight of GMC at incorporation time on heading stage of rye, heading stage and 10days after heading stage of barley were $2,715,\;2,352,\;2,867kg\;10a^{-1}$ respectively. Content of total nitrogen at three incorporation times was 1.31, 1.46, 1.38% and the C/N ratio were 33.4, 28.7, and 34.6, respectively. Some soil physical properties, such as soil hardness and bulk density tended to decrease with incorporation of GMC, while surface soil depth and porosity were increased. Some soil chemical properties, such as content of exchangeable cations and cation exchangeable capasity(CEC) were increased with incorporation of GMC compared with before experiment. Rice yields was increased 3~9% in diagnosis application plots on application of barley compared with control($559kg\;10a^{-1}$) and incorporation of barley caused to improve perfect kernel ratio 73.6~78.7% in appearance characteristics of brown rice compared with cotrol(73.0%). It was found that incorporation with 10days after heading stage of barley was more effective to reduce chemical nitrogen fertilizer and to improve soil fertility.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.617-628
• /
• 2022

A ground support pattern should be designed by properly integrating various support materials in accordance with the rock mass grade when constructing a tunnel, and a technical decision must be made in this process by professionals with vast construction experiences. However, designing supports at the early stage of tunnel design, such as feasibility study or basic design, may be very challenging due to the short timeline, insufficient budget, and deficiency of field data. Meanwhile, the design of the support pattern can be performed more quickly and reliably by utilizing the machine learning technique and the accumulated design data with the rapid increase in tunnel construction in South Korea. Therefore, in this study, the design data and ground exploration data of 48 road tunnels in South Korea were inspected, and data about 19 items, including eight input items (rock type, resistivity, depth, tunnel length, safety index by tunnel length, safety index by rick index, tunnel type, tunnel area) and 11 output items (rock mass grade, two items for shotcrete, three items for rock bolt, three items for steel support, two items for concrete lining), were collected to automatically determine the rock mass class and the support pattern. Three machine learning models (S1, A1, A2) were developed using two machine learning algorithms (SVR, ANN) and organized data. As a result, the A2 model, which applied different loss functions according to the output data format, showed the best performance. This study confirms the potential of support pattern design using machine learning, and it is expected that it will be able to improve the design model by continuously using the model in the actual design, compensating for its shortcomings, and improving its usability.

• Journal of the Korean earth science society
• /
• v.42 no.5
• /
• pp.524-535
• /
• 2021

Rapid climate change and oceanic warming have increased the variability of oceanic wave heights over the past several decades. In addition, the extreme wave heights, such as the upper 1% (or 5%) wave heights, have increased more than the heights of the normal waves. This is true for waves both in global oceans as well as in local seas. Satellite altimeters have consistently observed significant wave heights (SWHs) since 1991, and sufficient SWH data have been accumulated to investigate 100-year return period SWH values based on statistical approaches. Satellite altimeter data were used to estimate the extreme SWHs at the Ieodo Ocean Research Station (IORS) for the period from 2005 to 2016. Two representative extreme value analysis (EVA) methods, the Initial Distribution Method (IDM) and Peak over Threshold (PoT) analysis, were applied for SWH measurements from satellite altimeter data and compared with the in situ measurements observed at the IORS. The 100-year return period SWH values estimated by IDM and PoT analysis using IORS measurements were 8.17 and 14.11 m, respectively, and those using satellite altimeter data were 9.21 and 16.49 m, respectively. When compared with the maximum value, the IDM method tended to underestimate the extreme SWH. This result suggests that the extreme SWHs could be reasonably estimated by the PoT method better than by the IDM method. The superiority of the PoT method was supported by the results of the in situ measurements at the IORS, which is affected by typhoons with extreme SWH events. It was also confirmed that the stability of the extreme SWH estimated using the PoT method may decline with a decrease in the quantity of the altimeter data used. Furthermore, this study discusses potential limitations in estimating extreme SWHs using satellite altimeter data, and emphasizes the importance of SWH measurements from the IORS as reference data in the East China Sea to verify satellite altimeter data.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.548-556
• /
• 2021

This study was conducted to investigate the applicability of lignocellulosic fiber and coconut shell activated carbon (CSA) for the production of a particulate matter (PM)-reducing air-filter as raw materials to solve the environmental problems of non-woven fabrics. CSA had a good potential to use as a raw material of air-filter for reducing volatile organic compounds as well as noxious metals, and reduction capability of the CSA was 5 times higher than that of wood fiber. Natural adhesives formulated with proteinaceous wastes mostly were applied successfully to fabricate air-filters with the shape of fiberboard. The air-filter fabricated with the minimum target density of 200 kg/m³ and the maximum CSA-content of 40 wt% in fiberboard had a good manageable strength. However, the fiberboard filters was required to make vent-holes for improving an air-permeability of the filters. Size of the CSA particles was adjusted to greater than 2 mesh with the consideration of strength and formability of the fiberboard. Three-layers fiberboard that only wood fiber and the mixture of wood fiber and CSA were formed in the surface and middle layers, respectively, was determined to the optimal condition for the production of air-filters. In addition, traditional Korean paper handmade from mulberry trees (TKP) showed a good PM-reducing property as an air-filter. It is concluded that air-filtering set composed of fiberboard with vent-holes and TKP instead of conventional air-filters made with non-woven fabrics can be used as a filter for reducing the concentrations of PM, VOC and noxious metals existed in indoor and outdoor spaces.

• Journal of Life Science
• /
• v.31 no.9
• /
• pp.840-848
• /
• 2021

This study was conducted to estimate annual trends and the environmental effects in the racing records of Jeju horses. The Korean Racing Authority (KRA) collected 48,645 observations for 2,167 Jeju horses from 2002 to 2019. Racing records were preprocessed to eliminate errors that occur during the data collection. Racing times were adjusted for comparison between race distances. A stepwise Akaike information criterion (AIC) variable selection method was applied to select appropriate environment variables affecting racing records. The annual improvement of the race time was -0.242 seconds. The model with the lowest AIC value was established when variables were selected in the following order: year, budam classification, jockey ranking, trainer ranking, track condition, weather, age, and gender. The most suitable model was constructed when the jockey ranking and age variables were considered as random effects. Our findings have potential for application as basic data when building models for evaluating genetic abilities of Jeju horses.

• Journal of Korea Water Resources Association
• /
• v.54 no.spc1
• /
• pp.1143-1154
• /
• 2021

The selection of activation function has a great influence on the groundwater level prediction performance of artificial neural network (ANN) model. In this study, five activation functions were applied to ANN model for two groundwater level observation wells in the middle mountainous area of the Pyoseon watershed in Jeju Island. The results of the prediction of the groundwater level were compared and analyzed, and the optimal activation function was derived. In addition, the results of LSTM model, which is a widely used recurrent neural network model, were compared and analyzed with the results of the ANN models with each activation function. As a result, ELU and Leaky ReLU functions were derived as the optimal activation functions for the prediction of the groundwater level for observation well with relatively large fluctuations in groundwater level and for observation well with relatively small fluctuations, respectively. On the other hand, sigmoid function had the lowest predictive performance among the five activation functions for training period, and produced inappropriate results in peak and lowest groundwater level prediction. The ANN-ELU and ANN-Leaky ReLU models showed groundwater level prediction performance comparable to that of the LSTM model, and thus had sufficient potential for application. The methods and results of this study can be usefully used in other studies.