• Bulletin of the Korean Chemical Society
• /
• 제24권7호
• /
• pp.975-980
• /
• 2003

The electrochemical properties and the mechanism of formation of anodic oxide films on Mg alloys containing 0-15 mass% Al, when anodized in NaOH solution, were investigated by focusing on the effects of anodizing potential, Al content, and anodizing time. The intensity ratio of Mg(OH)₂ in the XRD analysis decreased with increasing applied potential, while that of MgO increased. Mg(OH)₂ was barely detected at 80 V, while MgO was readily detected. The anti-corrosion properties of anodized specimens at each constant potential were better than those of non-anodized specimens. The specimen anodized at an applied potential of 3 V had the best anti-corrosion property. The intensity ratio of the β phase increased with aluminum content in Mg-Al alloys. During anodizing, the active dissolution reaction occurred preferentially in β phase until about 4 min, and then the current density increased gradually until 7 min. The dissolution reaction progressed in α phase, which had a lower Al content. In the anodic polarization test in 0.017 mol·$dm^{-3}$ NaCl and 0.1 mol·$dm^{-3}$ Na₂SO₄ at 298 K, the current density of Mg-15 mass% Al alloy anodized for 10 min increased, since the anodic film that forms on the α phase is a non-compacted film. The anodic film on the α phase at 30 min was a compact film as compared with that at 10 min.

• Korea-Australia Rheology Journal
• /
• 제15권2호
• /
• pp.83-90
• /
• 2003

In cases of the microfluidic channel, the electrokinetic influence on the transport behavior can be found. The externally applied body force originated from the electrostatic interaction between the nonlinear Poisson-Boltzmann field and the flow-induced electrical field is applied in the equation of motion. The electrostatic potential profile is computed a priori by applying the finite difference scheme, and an analytical solution to the Navier-Stokes equation of motion for slit-like microchannel is obtained via the Green's function. An explicit analytical expression for the induced electrokinetic potential is derived as functions of relevant physicochemical parameters. The effects of the electric double layer, the zeta potential of the solid surface, and the charge condition of the channel wall on the velocity profile as well as the electroviscous behavior are examined. With increases in either electric double layer or zeta potential, the average fluid velocity in the channel of same charge is entirely reduced, whereas the electroviscous effect becomes stronger. We observed an opposite behavior in the channel of opposite charge, where the attractive electrostatic interactions are presented.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 추계학술대회
• /
• pp.311-311
• /
• 2017

• Korean Chemical Engineering Research
• /
• 제45권5호
• /
• pp.433-441
• /
• 2007

본 논문에서는 질산염 이온의 환원을 위한 Sn의 흡착 또는 전착을 가지는 Sn-modified Pt 전극의 안정성이 평가되었다. 전극의 불안정성의 원인을 찾기 위하여 전극이 접하는 용액과 전극에 가해지는 전압에 따른 Pt 표면에서 Sn의 전기화학적 및 재료적 변화가 조사되었다. 제작된 Sn-modified Pt 전극 표면의 Sn은 hydroxide 형태로 존재하여 물, 특히 산 용액에서 방치하는 것에 의해서도 용해되어 쉽게 전극의 활성이 감소되었으며, 질산염 이온의 환원 시 전극에 $Sn(OH)_2$와 Sn의 산화-환원 평형 전압 보다 음의 전압이 가해질 때 전극 표면의 Sn hydroxide는 Sn으로 환원되어 Pt 전극 내부로 고체 확산되었고, 이는 Sn-modified Pt 전극의 활성을 감소시켰다. Sn의 고체 확산은 전극에 가해주는 전압에 비례하였다. Sn을 Pt에 코팅시키기 위하여 UPD 조건에서 흡착하는 것 보다 많은 Sn을 Pt 표면에 붙일 수 있는 Sn을 Pt에 전해 전착시키는 것이 질산염 이온의 환원하는 동안 전극의 건전성을 유지하는데 유리하였다.

• Journal of applied mathematics & informatics
• /
• 제17권1_2_3호
• /
• pp.73-91
• /
• 2005

The application of Green's function in calculation of flow characteristics around submerged and floating bodies due to a regular wave is presented. It is assumed that the fluid is homogeneous, inviscid and incompressible, the flow is irrotational and all body motions are small. Two methods based on the boundary integral equation method (BIEM) are applied to solve associated problems. The first is a low order panel method with triangular flat patches and uniform distribution of velocity potential on each panel. The second method is a high order panel method in which the kernels of the integral equations are modified to make it nonsingular and amenable to solution by the Gaussian quadrature formula. The calculations are performed on a submerged sphere and some floating spheroids of different aspect ratios. The excellent level of agreement with the analytical solutions shows that the second method is more accurate and reliable.

• Journal of Microbiology and Biotechnology
• /
• 제23권8호
• /
• pp.1140-1146
• /
• 2013

Bioelectrochemical systems (BESs) have been suggested as a new technology for wastewater treatment while accomplishing energy and chemical generation. This study describes the performance of BESs based on mixed culture that are capable of reducing carbon dioxide to acetate. The cathode potential was a critical factor that affected the performance of the BESs. The rate of acetate production increased as the electrode potential became more negative, from 0.38 mM $d^{-1}$ (-900 mV vs. Ag/AgCl) to 2.35 mM $d^{-1}$ (-1,100 mV), while the electron recovery efficiency of carbon dioxide reduction to acetate increased from 53.6% to 89.5%. The microbial population was dominated by relatives of Acetobacterium woodii when a methanogenic inhibitor was added to the BESs initially.

• Mycobiology
• /
• 제38권4호
• /
• pp.238-248
• /
• 2010

This review provides background information on the importance of bioremediation approaches. It describes the roles of fungi, specifically white rot fungi, and their extracellular enzymes, laccases, ligninases, and peroxidises, in the degradation of xenobiotic compounds such as single and mixtures of pesticides. We discuss the importance of abiotic factors such as water potential, temperature, and pH stress when considering an environmental screening approach, and examples are provided of the differential effect of white rot fungi on the degradation of single and mixtures of pesticides using fungi such as Trametes versicolor and Phanerochaete chrysosporium. We also explore the formulation and delivery of fungal bioremedial inoculants to terrestrial ecosystems as well as the use of spent mushroom compost as an approach. Future areas for research and potential exploitation of new techniques are also considered.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권10호
• /
• pp.1212-1216
• /
• 2014

This study aims to find out the best anode location for buried pipelines. Numerical simulation program known as CATPRO (Elsyca, Belgium) were used for confirming the best location of anodes and the effects of impressed current cathodic protection system. Applied conditions for numerical simulation were similar to on-site environmental conditions for optimal application of cathodic protection system. Used criterion of cathodic protection was NACE SP 0169, which describes that minimum requirement for cathodic protection is -850mV vs. CSE. Various layouts for anodes' installation were applied, which were distance between anodes, anode installation location, and applied current. The areas where cathodic protection potential was lower than -850mV vs. CSE was limited up to 50m from anode installation locations. It was founded numerical analysis obtain cost-effective and efficient cathodic protection methods before design and application the impressed cathodic protection system to on-site environment.

• 한국응용과학기술학회지
• /
• 제31권3호
• /
• pp.472-477
• /
• 2014

A voltammetric investigation of Au assay was conducted at a low cost, using Nafion and DNA immobilized on a graphite Pencil working electrode (NDP) with a black lead counter and reference. The following optimal parameters were found: 0.4 V amplitude, 500 Hz frequency, -0.7 V initial potential, and 0.015 V increment potential. These optimal conditions were also applied to sand obtained from the river site. The aforementioned technique is simpler and less costly compared to the common voltammetry and spectrophotometric methods.

• Coupled systems mechanics
• /
• 제6권1호
• /
• pp.17-28
• /
• 2017

In this work, we extend the previously developed split kinetic energy (dubbed KEP) method by Mineo and Chao (2012) by modifying the mass parameter to include the negative mass. We first show how to separate the total system into the subsystems with 3 attractive delta potentials by using the KEP method. For repulsive delta potentials, we introduce "negative" mass terms. Two cases are demonstrated using the "negative" mass terms for repulsive delta potential problems in quantum mechanics. Our work shows that the KEP solution scheme can be used to obtain not only the exact energies but also the exact wavefunctions very precisely.