• 소음진동
• /
• 제3권4호
• /
• pp.341-352
• /
• 1993

Although a frequency analysis by FFT algorithm has been widely used in the vibration community, this approach has somewhat limited features when an analysist want to see the details of frequency trends because FFT shows only energy contents along frequencies. So the concept of instantaneous frequency that represents the dominant frequency component at each time needs to be introduced. In this paper, to get the instantaneous frequency, two methods are used. Methods using Hilbert transform and evolutionary spectrum are those. One of the problems of estimating instantaneous frequency using Hilbert transform is that it is normally very sensitive to signal to noise ratio(SNR) because of the differentiation. Moving window is applied on the estimation of instantaneous frequency, and instantaneous frequency histogram are used to handle this problem and proved to be very effective. Computer simulations for various signals have been done to understand the characteristics of instantaneous frequency. The usefulness of signal analysis using instantaneous frequency was tested by three simple experiments, which were engine experiment, beam experiment, and car door experiment. The instantaneous frequency analysis is found to be a useful technique to analyze the signals that have time varying frequencies.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2005년도 학술대회
• /
• pp.61-65
• /
• 2005

비트율 제어 알고리듬의 목적은 ‘비트율 제한조건을 만족하면서 화질을 일정하게 유지하는 것’이다. 그러나 통상적인 비트율 제어 알고리듬에서는 화질을 일정하게 유지시키는 것 보다는 버퍼의 오버플로우 및 언더플로우가 발생하지 않도록 비트를 분배하는 것이 주된 목적으로서 시퀀스가 진행함에 따라 불가피하게 시각적으로 바람직하지 않은 화질의 등락이 발생한다. 본 논문에서는 비트율 제어의 본질적인 목적에 부합하도록 버퍼 제한조건을 만족시키는 범위에서 화질을 가능한 한 일정하게 유지하는 방법을 제시한다. 제안방법에서는 먼저 일반적인CBR(constant bit rate) 알고리듬으로 부호화를 먼저 시작한 후, 일정 크기의 슬라이딩 윈도우 내에서 발생한 시퀀스를 분석하여 다음 단계에서 사용할 양자화 파라미터의 기준값을 결정한다. 마지막 단계에서는 다시 시퀀스의 처음으로 돌아가 얻어진 기준 양자화 파라미터를 사용하여 VBR(variable bir tate)의 부호화를 수행한다. 제안 방법은 실시간의 제한요소가 엄격하지 않은 응용분야에서 유용할 것으로 기대된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1352-1354
• /
• 1997

Transparent conductive thin films have found many application in many active and passive electronic and opto-electronic devices as like flat Panel display electrode and window heat mirror, etc. Low resistivity and high transmittance of this films can be obtained by controlling deposition parameters, which are oxygen partial Pressure, substrate temperature and dopant concentration. In this study, We prepared non-stoichiometric and Sb-doped thin films of tin dioxide by reactive DC magnetron sputtering technology. The lowest resistivity of about $3.0{\times}10^{-3}\;{\Omega}cm$ and 80% transmittance in the visible light region have heed obtained at optimal deposition condition.

• 한국식생활문화학회지
• /
• 제35권2호
• /
• pp.181-192
• /
• 2020

This study aimed to identify whether or not four service situations varying according to positive and negative combinations of physical evidence and functional service influence store image and purchase behavioral intentions of customers at bulgogi restaurants. The video-scenario technique was used for the study. Data were analyzed with the SPSS (Window 19.0) package using frequency analysis, one-way ANOVA, 2 by 2 factorial ANOVA, exploratory factor analysis, and multiple regression analysis to confirm the hypotheses. The combined effect of functional service and physical evidence influenced store image and purchase intention. In terms of seperate effect of physical evidence and functional service, the effect of employee service on store image was more powerful than that of physical evidence, even though the effect differed depending on the situation. Purchase intention was only influenced by functional service quality from employees under the four different scenarios. Thus, when opening a Korean restaurant, proper management of tangible evidence suitable to service, and the prices expected from local customers should be determined. Additionally, extremely high or low levels of physical evidence management should be avoided.

• 한국태양에너지학회 논문집
• /
• 제34권5호
• /
• pp.1-9
• /
• 2014

Daylight is very useful to control the indoor environment, and can save energy in buildings. So it is necessary to evaluate the daylighting performance of buildings. We proposed a simplified equation that can be used in the early stages of design. And we verified the equation by using the measured illuminance data from the 1/5 scale model. We compared the calculated indoor illuminances and measured illuminance including Daylight Factors of scale model in order to verify the applicability of the simplified equation, and proved the analyzed values are acceptable. When we have a target value of the Daylight Factor, we just have to determine the window area, transmittance of the glazing system, and indoor surface reflectance, then can achieve it with this simplified equation.

• 한국태양에너지학회 논문집
• /
• 제34권6호
• /
• pp.39-47
• /
• 2014

Daylighting has a great effect on people inside the room. It is also closely related to the lighting energy consumption. Daylight factor(DF) is a very important index for evaluation of the daylighting in overcast sky. The objective of this study is to verify the suitability of the Tregenza's Modified Split Flux formula for the calculation of the daylight factor. We compared the daylight factors calculated by two methods; one by a measurement with 1/5 scale model and the other by the Daysim program. We used variables for verification as window wall ratios(WWR) and angles of the sky visible. As a result, daylight factor calculated by Modified Split Flux is similar to the measurement when more daylight enters the inside. And error is significantly increased when the angle of the sky visible is $50^{\circ}$.

• The Korean Journal of Pain
• /
• 제6권2호
• /
• pp.280-283
• /
• 1993

Idiopathic hyperhidrosis is a physically and emotionally distressing symptom, which lacks a precise definition. Although operative and nonoperative methods have been shown to be effective in the treatment of idiopathic hyperhidrosis, limitations, cautions and complications are inherent in their extended use. The purpose of this report is to describe the theraputetic effects of magnetic resonance for managing idiopathic hyperhidrosis. A 28 years old woman had been suffering from profuse sweating on both planter and palmar sides for 15 years. We successfully treated this symptom with the 6 magnetic resonance treatments without any complications. Now she lives well in a condition of normal sweating after the applications. It suggest that short daily periods of exposure to appropriate magnetic resonance can beneficially modulate the balance of autonomic nervous system that are responsible for sympathetic overflow, and that there is an effective window of induced electrical magnetism in which sympathetic function can be controlled in the absence of side effects.

• 대한임베디드공학회논문지
• /
• 제13권2호
• /
• pp.101-107
• /
• 2018

As indoor pollutants such as carbon dioxide and dust mainly affect the respiratory and circulatory systems, there is an increasing need for real-time indoor / outdoor environmental monitoring. In this paper, we have developed a real - time environmental monitoring system using the cloud-based 3G integrated environmental sensor module for environmental monitoring. A highly reliable environmental information monitoring system requires various IT technologies such as infrastructure (server, commercial software, etc.), service application software, security, and authentication. A real-time environment monitoring system based on cloud service that can provide reliable service satisfying these configuration requirements is proposed and implemented. It is expected that this system can be applied to various technologies such as indoor automatic window opening/closing system based on the Internet.

• 한국전자통신학회논문지
• /
• 제4권4호
• /
• pp.301-305
• /
• 2009

Pt 나노입자의 합성과 이를 이용한 hybrid Pt-$SiO_2$ 나노입자의 합성을 성공적으로 수행하였으며, self-assembled Pt nanoparticles monolayer를 charge trapping layer로 활용하는 metal-oxide-semiconductor(MOS) type memory의 한 예로 non-volatile memory(NVM)의 응용을 보임으로써 나노입자의 활용 가능성을 보이고, 또한, hybrid Pt-$SiO_2$ 나노입자 박막 층의 제어를 통한 MOS type memory device에의 보다 더 넓은 활용 가능성을 보이고자 하였다.

• 한국지열·수열에너지학회논문집
• /
• 제8권2호
• /
• pp.27-35
• /
• 2012

Five zero energy house models developed in Korea for the purpose of the energy performance were compared and analyzed in the study. The standard passive house model applying common technology and efficient energy performance elements was proposed. Standard passive house 5 models have been developed commonly aiming at 100% energy saving, applying high-performance and high-efficiency exterior thermal insulation, using 3 low-e coated window system, and targeting average 0.65 ACH to enhance privacy. Energy recovery ventilators and dry and cold radiant heating floor has been partially applied. Eco-design techniques such as the awning device, heat insulating door, using natural light have been used. Solar and geothermal systems as the application of renewable energy technologies have been commonly applied. And fuel cells were applied to a partial model. The standard model based on common technical elements and average performance of each element and obtained from five model analysis has been proposed in the study.