• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.103-108
• /
• 2023

In this paper, a performance enhancement study of an AESA antenna that can be applied to a seeker that serves as the eye of a missile was conducted, and the performance of the antenna was verified through actual measurement. When designing an AESA antenna, the optimization of the active reflection coefficient must be considered during transmission due to the mutual coupling between radiators that inevitably occurs, and the selection of a radiator that can overcome the space limitation of the seeker with a small size/light weight is an important design consideration. Accordingly, optimization in terms of electrical performance and low-profile structure is required through research on array antennas for application to the AESA structure. The radiator designed and measured in this paper was designed as an SFN that can satisfy the low-profile structure while enhancing the performance of a general vivaldi antenna. Through this paper, it was confirmed that SFN has the same broadband characteristics as general vivaldi antennas and has optimized characteristics required for AESA antennas. The structure optimized through simulation confirmed the pattern characteristics and active reflection coefficient characteristics through the fabrication of actual proto-type antennas.

• Journal of KIISE:Information Networking
• /
• v.35 no.1
• /
• pp.11-20
• /
• 2008

An inevitable trend in the next generation wireless network environments is coexistence of different wireless access networks in a complementary, manner. In addition, mobile devices equipped with multiple air interfaces simultaneously executing diverse applications have been emerging, In such network environment, It is required that a solution for mobile users to seamlessly roam between different access networks as well as to satisfy QoS requirements of each application by efficiently utilizing coexisting various wireless access networks. In this paper, therefore, we propose a mobility management platform based on per-application end-to-end mobility management and cross-layer handover controls. Four core functional modules composing the proposed platform for end user devices are defined: Monitoring Agents, Profile Database, Decision Engine, and IP Agent. We show through simulations that the presented platform provides an improved QoS as it selectively utilizes the best available networks.

• Journal of Digital Convergence
• /
• v.10 no.5
• /
• pp.267-273
• /
• 2012

The semantic relationship structures hierarchically the huge amount of document objects which is usually not formatted. However, it is very difficult to structure relevant data from various distributed application domains. This paper proposed a new object management method to service the distributed domain objects by using semantic reference relationship. The proposed mechanism utilized the profile structure in order to extract the semantic similarity from application domain objects and utilized the joint matrix to decide the semantic relationship of the extracted objects. This paper performed the simulation to show the performance of the proposed method, and simulation results show that the proposed method has better retrieval performance than the existing text mining method and information extraction method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.11
• /
• pp.1027-1036
• /
• 1991

This paper proposes an implementation of ODIF(Open Document Interchange Format)decoder and PostScript converter. AS ODIF data stream based on IS 8613 is described according to ASN.1 notation it is necessary to decode ODIF data stream to the proper internal structure to PostScript format as proposed in order to make hard copies in good quality using LBP(Laser Beam Printer). Among several kinds of DA(Document Architecture) and DAP(Document Application Profile). PDA(Processable DA) and Core 26(Level 2 DAP) are selected for our study. An ODIF data stream submitted by ICL is used to show the conformance in the level of data stream.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05b
• /
• pp.22-25
• /
• 2001

A thyristor switch circuit for capacitor discharge application, of which the equivalent circuit includes a resistor between cathode and gate of a reverse-conducting thyristor and an avalanche diode anti-parallel between its anode and gate to set thyristor tum-on voltage, is monolithically integrated by planar process with AVE double-implantation method. To ensure a lower breakdown voltage of the avalanche diode for thyristor tum-on than the break-over voltage of the thyristor, $p^+$ wells on thyristor p base layer are made by boron implantation/drive-in for a steeper doping profile with higher concentrations while rest p layers of thyristor and free-wheeling diode parts are formed with Al implantation/drive-in for a doping profile of lower steepness. The free-wheeling diode part is isolated from the thyristor part by formation of separated p-well emitter for suppressing commutation between them, which is achieved during the formation of thyristor p-base layer.

• Journal of Environmental Science International
• /
• v.10 no.3
• /
• pp.217-223
• /
• 2001

Where no records are available at a site, a preliminary estimate may be made from relations between floods and catchment chatacteristics. A number of these chatacteristics were chosen for testing and were measured for those catchments where mean annual flood estimates were available. Although the improvement using extended data in regression of flood estimates on catchment characteristics was small, this may be due to the limitations of the regression model. When an individual short term record is to be extended, more detailed attention can be given; an example is presented of the technique which should be adopted in practice, particularly when a short term record covers a period which is known to be biassed. A method of extending the peaks over a threshold series is presented with a numerical example. The extension of records directly from rainfall by means of a conceptual model is discussed, although the application of such methods is likely to be limited by lack of recording raingauge information. Methods of combining information from various sources are discussed in terms of information from catchment characteristics supplemented by records. but are generally applicable to different sources of information. The application of this technique to estimating the probable maximum flood requires more conservative assumptions about the antecedent condition, storm profile and unit hydrograph. It is suggested that the profile and catchment wetness index at the start of the design duration should be based on the assumption that the estimated maximum rainfall occurs in all durations centered on the storm peak.

• 전기의세계
• /
• v.29 no.4
• /
• pp.247-255
• /
• 1980

In this study, an application of Finite Element Method which, in principle, based on variational calculus has been presented for the two-dimensional analysis of magnetic flux distribution in the shell type core of single phase transformer. The necessary stationarity condition of energy functional and boundary conditions were determined under the assumptions that the electromagnetic field considered is stationary and that the effect of eddy current is negligible. In the process of application the domain of magnetic field was divided into triangle subsectional elements and then the matrix equations were constructed for the respective triangular element and for those of all after the manipulation of minimization process to the vector potential of magnetic field at the each vertex of the element. Furthermore the numerical computation for the equations was guided by the Gaussian Elimination Methods. As the results obtained, it is found that the aspect of magnetic flux distribution inside the core as well as the leakage flux profile at the vicinity of the inner leg of the core is not much different from the well-known distribution profile of magnetic flux, however, the procedure shows to possess the merit of the uniquely deterministic nature for the flux distribution at the desired points.

• Nuclear Engineering and Technology
• /
• v.52 no.10
• /
• pp.2262-2273
• /
• 2020

Digital twin technology can provide significant value for the prognostics and health management (PHM) of critical plant components by improving insight into system design and operating conditions. Digital twinning of systems can be utilized for anomaly detection, diagnosis and the estimation of the system's remaining useful life in order to optimize operations and maintenance processes in a nuclear plant. In this regard, a conceptual framework for the application of digital twin technology for the prognosis of Control Element Drive Mechanism (CEDM), and a data-driven approach to anomaly detection using coil current profile are presented in this study. Health management of plant components can capitalize on the data and signals that are already recorded as part of the monitored parameters of the plant's instrumentation and control systems. This work is focused on the development of machine learning algorithm and workflow for the analysis of the CEDM using the recorded coil current data. The workflow involves features extraction from the coil-current profile and consequently performing both clustering and classification algorithms. This approach provides an opportunity for health monitoring in support of condition-based predictive maintenance optimization and in the development of the CEDM digital twin model for improved plant safety and availability.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.5
• /
• pp.82-91
• /
• 2014

The combined generator system by integrating several renewable energy sources can share the electrical infrastructure and therefore have the advantage of constructing not only the transmission system but also the power conversion system. Among the various combined renewable system, the wind power and wave power has a high possibility of future growth due to the economic feasibility in offshore environment. This kind of large-scale combined systems might be follow the determination by the transmission system operator's directions and control the output profile by focusing at PCC. However, both renewable energies are depend on the unpredictable environmental variation; it is needed to do the compensation devices. In this paper, the ESS compensation plan is proposed to do output determination of the combined generator system by paying attention to active power of utility grid with the analysis of the controllable elements of the wind and wave power generator. The improvement of the new application technique of the combined system is confirmed through using the PSCAD/EMTDC. The entire simulation process was designed by adopting the active power control according to the reference signal of TSO.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.455-458
• /
• 2009

Bluetooth technology has been applied to mobile device, personal computers, peripherals, information and variety of consumer electronics. Not also the original Bluetooth technology must be especially focused in the application of mobile phone but applications such as wireless headsets and dial-up networking may be increased. However Bluetooth is so only focused to wireless headset application that the various software applications are presently ignored. In this paper, we propose the framework design to implement Bluetooth profile for kiosk servers, which can be used in Theater, train station, bank, government and public offices. Then mobile devices capable of processing user's input/output can be remotely accessed in these servers by using Bluetooth module and AP, although Kiosk servers are only processed user input data.