• Journal of Korea Multimedia Society
• /
• v.12 no.9
• /
• pp.1297-1308
• /
• 2009

The life time of a wireless sensor network composed of numerous sensor nodes depend on ones of its sensor nodes. The energy efficiency operation of nodes, therefore, is one of the crucial factors to design the network. Researches based on the hierarchical network topology have been proposed and evolved in terms of energy efficiency. However, in existing researches, application layer data obtained from sensor nodes are not considered properly to compose cluster, including issue that nodes communicate with their cluster heads in TDMA scheduling. In this paper, we suggest an energy-efficient topology control scheme based on application layer data in wireless sensor networks. By using application layer data, sensor nodes form a section which is defined as the area of adjacent nodes that retain similar characteristics of application environments. These sections are further organized into clusters. We suggest an algorithm for selecting a cluster head as well as a way of scheduling to reduce the number of unnecessary transmissions from each node to its cluster head, which based on the degree and the duration of similarity between the node's data and its head's data in each cluster without seriously damaging the integrity of application data. The results show that the suggested scheme can save the energy of nodes and increase the life time of the entire network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.12
• /
• pp.2798-2805
• /
• 1997

The paper studies the Quality of Service(QoS) concept in Broadband Integrated Services Digital Network (B-ISDN). Guaranteeing the QoS requirements indistributed multimedia systems and networks is fundamentally an end-to-end issus, that is, from application to application. An important issue in the QoS translation between the application-level QoS and network-level QoS is that the translation depends not only on the translation between system resources and network resources, but also on the translation between thelayered protocol and the access procedures. In this paepr, we propose a methodology for translating the AAL(ATM Adaptation Layer) QoS parameters into the ATM layer QoS parameters in end-systems. The QoS parameters in the ATM layer and AAL are defined, and we concentrate on the translation from the AAL to the ATM layer, because the AAL must be designed to be service dependent and specific. As an example, we concentrate on the constant bit rate(CBR) guaranteed real-time service using AAL1 protocol.

• Genomics & Informatics
• /
• v.13 no.1
• /
• pp.7-14
• /
• 2015

During recent years, there has been exponential growth in biological information. With the emergence of large datasets in biology, life scientists are encountering bottlenecks in handling the biological data. This study presents an integrated geographic information system (GIS)-ontology application for handling microbial genome data. The application uses a linear referencing technique as one of the GIS functionalities to represent genes as linear events on the genome layer, where users can define/change the attributes of genes in an event table and interactively see the gene events on a genome layer. Our application adopted ontology to portray and store genomic data in a semantic framework, which facilitates data-sharing among biology domains, applications, and experts. The application was developed in two steps. In the first step, the genome annotated data were prepared and stored in a MySQL database. The second step involved the connection of the database to both ArcGIS and $Prot{\acute{e}}g{\acute{e}}$ as the GIS engine and ontology platform, respectively. We have designed this application specifically to manage the genome-annotated data of rumen microbial populations. Such a GIS-ontology application offers powerful capabilities for visualizing, managing, reusing, sharing, and querying genome-related data.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.06a
• /
• pp.352-357
• /
• 1998

Conventional marketing research generally focuses on a single layer's benefit. A notable example is the consumer layer providing managers with partial market information to evaluate relevant strategies. As generally known, marketing management encounters complex supply and demand behaviors, thereby necessitation that a successful marketing strategy adopt multi-layer considerations, such as the consumer layer, channel-retailer layer, and marketing planner layer. In light of above situation, this study applies fuzzy theory and the analytic hierarchy process(AHP) technique to analyze the performances of marketing strategies under multi-layer benefits, In addition, conventional marketing research has difficulty in efficiently allocating the limited budget so that each desired criterion can be significantly enhanced by a group of events. Therefore, a weighting structure among the goal, layers, criteria, and strategies(i.e. a group of events) is also developed herein to trace the influential process and assist marketing managers in efficiently allocating resources(i.e.budget).

• Journal of Environmental Science International
• /
• v.6 no.5
• /
• pp.425-435
• /
• 1997

One-dimensional thermodynamic mixed layer model to stimulate variations of meteorological variables wish the planetary boundary layer has been developed In this study. This model consists of 2 prognostic equations, which can predict the variations of potential temperature and mixing ratio and several diagnostic equations. Physics within the surface and mixed layers has been considered seperately in the model. For the variations of the model, Its result has been analysed and compared with observated data over Ole Dukyang Bay for one day, July 23, 1992. The simulated height of mixed layer is comparable to the observation and the variations of temperature and mixing ratio in the mixed layer are also reasonably simulated. Those Imply that the model responds appropriately with given boundary conditions In sprite of Its simplilfied assumptions applied to the model and insufficient boundary and Initial conditions.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.1
• /
• pp.10-14
• /
• 2001

The superconducting transmission cable is one of interesting part in power application using high temperature superconducting wire. One important parameter in HTS cable design is transport current sharing because it is related with current transmission capacity and loss. In this paper, we calculate self inductances of each layer and mutual inductances between two layers from magnetic field energy, and current sharing of each layer for 4-layer cable using the electric circuit model which contain inductance and resistance (by joint and AC loss). Also, transport current losses which are calculated by monoblock model and Norris equation are compared. As a results, outer layer has always larger transport current than inner layer, and current capacity of each layer is largely influenced by resistance per unit cable length. As a conclusion, for high current uniformity and low AC loss, we have to decrease inductances themselves or those differences.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.411-414
• /
• 1998

In this paper, the silicon-nitride membrane structure for IR sensor was fabricated through the etching and the direct bonding. The PT layer as a IR detection layer was deposited on the membrane and its characteristics were measured. The attack of PT layer during the etching of silicon wafer as well as the thermal isolation of the IR detection layer can be solved through the method of bonding/etching of silicon wafer. Because the PT layer of c-axial orientation rained thermal polarization without polling, the more integration capability can be achieved. The surface roughness of the membrane was measured by AFM, the micro voids and the non-contacted area were inspected by IR detector, and the bonding interface was observed by SEM. The polarization characteristics and the dielectric characteristics of the PT layer were measured, too.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1551-1553
• /
• 2000

Superconducting power cable is one of the most promising energy application of high-$T_c$ superconductors (HTS). A prototype HTS cable have been constructed multi-layer cable using Bi-2223 tape and tested. The result shows that the total transport current of HTS cable in $LN_2$ was 475[A], and transport current passed through almost the outer layer (2-layer). Also, AC transport losses in outer layer of HTS cable was proportion to $I^2$ and higher than losses of inner layer. As magnetic distribution were concentrated on outer layer.

• Journal of Sensor Science and Technology
• /
• v.24 no.2
• /
• pp.83-87
• /
• 2015

In this paper, we fabricated a low-cost glucose sensor with a simpler structure and fabrication process than the existing glucose sensor. The currently used glucose sensor has a three-layer structure with upper, middle, and bottom plates; here, we fabricated a single-layer glucose sensor using only a printing and dispensing process. We successfully fabricated the glucose sensor using a simple method involving the formation of an electrode and insulator layer through a 2- or 3-step printing process on plastic or paper film, followed by the dispensing of glucose oxidase solution on the electrode. Cyclic voltammetry (CV) and cyclic amperometry (CA) measurements were used to evaluate the characteristics of the fabricated single-layer glucose sensor. Also, its sensitivity was analyzed through glucose-controlled blood measurements. Hence, a low-cost single-layer glucose sensor was fabricated with evaluation of its characteristics demonstrating that it has useful application in medicine.

• Carbon letters
• /
• v.11 no.2
• /
• pp.127-130
• /
• 2010

Boron doped fullerene $C_{60}$ ($B:C_{60}$) films were prepared by the thermal evaporation of $C_{60}$ powder using argon plasma treatment. The morphology and structural characteristics of the thin films were investigated by scanning electron microscope (SEM), Fourier transform infra-red spectroscopy (FTIR) and x-ray photo electron spectroscopy (XPS). The electrochemical application of the boron doped fullerene film as a coating layer for silicon anodes in lithium ion batteries was also investigated. Cyclic voltammetry (CV) measurements were applied to the $B:C_{60}$ coated silicon electrodes at a scan rate of $0.05\;mVs^{-1}$. The CV results show that the $B:C_{60}$ coating layer act as a passivation layer with respect to the insertion and extraction of lithium ions into the silicon film electrode.