• Journal of KSNVE
• /
• v.7 no.1
• /
• pp.61-69
• /
• 1997

Despite of the development in the finite element method, it is difficult to get the finite element model describing the dynamic characteristics of the complex structure exactly. Therefore a number of different methods have been developed in order to update the finite element model of a structure using vibration test data. This paper outlines the basic formulation for the frequency response function based updating method. One important advantage of this method is that the intermediate step of performing an eigensolution extraction is unnecessary. Using simulated experimental data, studies are conducted in the case of 10 DOF discrete system. The solution of noisy and incomplete experimental data is discussed. True measured frequency response function data are used for updating the finite element model of a beam and a plate. Its applicability to the joint identification is also considered.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.241-246
• /
• 1996

An analytical model to calculate rate of vapor generation due to heterogeneous wall nucleation in flashing flow is developed. In the present model, an important parameter of the vapor generation term, i.e. nucleation site density is calculated by integrating its probability distribution function with respect to active cavity radius. The limits of integration are minimum and maximum active cavity radii, and these are formulated using an active cavity model for nucleate boiling. This formulation, therefore. can statistically account for the effect of surface specific thermo-physical and geometric conditions on the vapor generation rate and flashing inception. For verifying the adequacy of the present model, steady state two-fluid and the bubble transport equations are solved with applicable constitutive equations. The applicable region of the bubble transport equation is also extended to churn-turbulent flow regime to predict interfacial area concentration at high void fraction. Predicted results in terms of axial pressure and void fraction profiles along the channels are compared with experimental data of Super Moby Dick and BNL Reasonable agreements have been achieved and this shows the applicability of the present model to flashing flow analysis.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.1
• /
• pp.51-58
• /
• 1998

The opening of an event in a given geographical area may be defined as an innovation. Visitors to the event adopt the innovation; therefore, their visitation patterns since the opening can be regarded as a diffusion process. Bass' model of diffusion process was applied to analyzing weekly visitation of Kwang-ju Viennale. Parameters of the Bass' model were estimated by regression analysis, and then reviewed in terms of applicability. Actual estimation of event visitation was implemented by calculation of the three parameters of the model based on the actual data. After comparing estimated value with actual value, it was concluded that Bass' model is applicable to estimating event visitation as far as it is the only prediction method available at this point.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.238-239
• /
• 2021

This study presented the development of a user centered school facility fire safety evaluation model that would support fire safety evaluation, which is globally recognized as being important in terms of school safety, to be more efficiently implemented in the school field mainly by students. The study consisted of five steps. First, actual condition survey tools were developed based on the major fire safety evaluation items derived through literature review. Second, the characteristics of domestic school facilities in terms of fire safety were developed using the survey tools. Third, an evaluation model at a level utilizable by students was developed based on the foregoing characteristics. Fourth, the applicability of the model was verified through a trial application of the model to elementary school students. Finally, legal and institutional improvement plans and fire safety education materials were presented through a policy proposal.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.3
• /
• pp.50-57
• /
• 2002

As one of the developing countries in the world trade market, we have to apply the environmental concept at the development of a product for environmentally conscious manufacturing system(ECMS). Traditionally, production control model has been studied based on a new product manufacturing environment. However, ECMS such as a remanufacturing system should be developed and implemented for highly competitive environment in 21C. The objective of this study was to extend the research of production control model by applying it at the remanufacturing environment of ECMS and to test the applicability of current production control model at the remanufacturing environment by the simulation experimental study.

• Structural Engineering and Mechanics
• /
• v.44 no.2
• /
• pp.163-178
• /
• 2012

A strut-and-tie model is introduced in this paper to predict the ultimate shear strength of non-seismically detailed columns. The validity and applicability of the proposed strut-and-tie model are evaluated by comparison with available experimental data. The model was developed based on visible crack patterns observed on the test specimens. The concrete contribution is integrated into the strut-and-tie model through a concept of equivalent transverse reinforcement. To further validate the model a full-scale non-seismically detailed reinforced concrete column was tested to investigate its seismic behavior. The specimen was tested under the combination of a constant axial load, $0.30f_c{^{\prime}}A_g$ and quasi-static cyclic loadings simulating earthquake actions. Quasi-static cyclic loadings simulating earthquake actions were applied to the specimen until it could not sustain the applied axial load. The analytical results reveal that the strut-and-tie method is capable of modeling to a satisfactory accuracy the ultimate shear strength of non-seismically detailed columns subjected to reserved cyclic loadings.

• International Commerce and Information Review
• /
• v.8 no.1
• /
• pp.33-50
• /
• 2006

This research develops, and empirically test a model for explaining/predicting the Determinants and Satisfaction of Portal Cite in Internet Initiation Page. Also this paper describes a theoretical model for investigating the service quality satisfaction in the Internet Initiation Page. This research is the first to empirical test the causal relationships in determinants of Portal Cite. The model of the satisfaction for Portal Cite are tested here using data from 224 samples. Based on the research model, a comprehensive set of hypotheses is formulated and a methodology for testing them is outlined. some of the hypotheses are tested empirically to demonstrate the applicability of the theoretical model. In examining the relationships of the determinants factors, satisfaction show in significantly by Convenience, Information Provided, Entertainments, Interaction but that show in not significantly by the Trustworthiness, In addition, Portal Cite in Internet Initiation Page shows indirect effect between customer satisfaction and referral.

• Structural Engineering and Mechanics
• /
• v.91 no.3
• /
• pp.239-250
• /
• 2024

With the aim to provide better predication about fracture behavior, a numerical simulating strategy based on the rigid spring model is proposed for reinforced concrete (RC) structures in this study. According to the proposed strategy, concrete is partitioned into a series of irregular rigid blocks based on the Voronoi diagram, which are connected by interface springs. Steel bars are simulated by bar elements, and the bond slip element is defined at bar element nodes to describe the interaction between reinforcement and concrete. A concrete damage evolution model based on the separation criterion is adopted to describe the weakening process of interface spring between adjacent blocks, while a nonlinear bond slip model is introduced to simulate the synergy behaviour of reinforced steel bars and concrete. In the damage evolution model of concrete, the influence of compressive stress perpendicular to the interface on the shear strength is considered. To check the effectiveness and applicability of the proposed modelling, experimental and numerical studies about a simply-supported RC beam and the two-notched concrete plates in Nooru-Mohamed's experiment are conducted, and the grid sensitivity are investigated.

• Steel and Composite Structures
• /
• v.34 no.4
• /
• pp.599-613
• /
• 2020

In this article, free vibration attributes of double-walled carbon nanotubes based on nonlocal elastic shell model have been investigated. For this purpose, a nonlocal Flügge shell model is established to observe the small scale effect. The wave propagation is employed to frame the governing equations as eigenvalue system. The influence of nonlocal parameter subjected to different end supports has been overtly examined. A suitable choice of material properties and nonlocal parameter been focused to analyze the vibration characteristics. The new set of inner and outer tubes radii investigated in detail against aspect ratio and length. The dominance of boundary conditions via nonlocal parameter is shown graphically. The results generated furnish the evidence regarding applicability of nonlocal shell model and also verified by earlier published literature.

• IE interfaces
• /
• v.21 no.2
• /
• pp.209-220
• /
• 2008

Recently, innovative medical services are fast emerging, which include customized medical services based on bio-informatics, composition of cure and well-being exploiting ubiquitous technology, hospital supply chain management using RFID, and so forth. However, conventional approaches for new service development hardly give us systematic model to analyze and produce creative medical services. Because most of them are static and concentrate on microscopic tools or techniques. Thus, it is highly desirable to suggest an integrative framework to organize the whole transformation process from technology to medical service. The objective of this study is to propose a medical service engineering model based on the dynamic innovation theory. The proposed model contains objectives of service system, strategies of hospital, stages, activities required to deal with medical service life cycle, which incorporates the acquisition of new technology, transformation to the product, penetration into market, and adoption of consumers. In addition, the usefulness and applicability of the newly proposed model are provided using catholic medical center example.