• KCI Concrete Journal
• /
• v.14 no.1
• /
• pp.43-50
• /
• 2002

In this study, size effect tests were conducted on axial compressive strength of concrete members. An experiment of Mode I failure, which is one of two representative compressive failure modes, was carried out by using dimensionally proportional cylindrical specimens (CS). An adequate notch length was taken from the experimental results obtained from the compressive strength experiment of various initial notch lengths. Utilizing the notch length, specimen sizes were then varied. In addition, new parameters for the modified size effect law (MSEL) were suggested using Levenberg-Marquardt's least square method (LSM). The test results show that size effect was apparent for axial compressive strength of cracked specimens. Namely, the effect of initial notch length on axial compressive strength size effect was apparent.

• Textile Coloration and Finishing
• /
• v.7 no.1
• /
• pp.1-9
• /
• 1995

In order to improve dyeability of poly(ethylene terephthalate)(PET) micro filament fabrics, the effect of the prior oxygen low temperature plasma on the subsequent dyeing(deep dyeing, printing) was examined in various conditions. The apparent concentration of dyed PET micro filament fabrics was increased by $O_{2}$plasma treatment. Higher discharge power levels and higher reactor pressure values created more significant effect. The wettability was significantly increased by $O_{2}$ plasma treatment. Therefore, it is predicted that introducing hydrophilic group on the surface of material can improve the apparent concentration of PET micro filament fabrics.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.310-312
• /
• 2005

An out-of-step condition results from the loss of the synchronism of the generators. A disturbance in a power system causes the generator angle to oscillate. When there is a severe disturbance such as a heavy current fault loss of major generation or loss of a large block of load the oscillation can be severe and even increase largely and finally the out-of-step condition may occur During the power swing and out-of-step conditions, the a apparent impedance at a relay location changes, and the power flow also changes as the angle difference is varied. This paper presents a method to analyze the trajectory of complex power during a power swing and out-of-step condition. The trajectory of the complex power is analyzed when a power swings and a fault occurs. Moreover, the complex power is analyzed when the ratios between the voltages at both sides and the line impedances are changed. These methods are verified through simulation using the ATP/EMTP MODELS.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1854-1860
• /
• 2014

In this paper, the energy saving on mobile communication repeater is studied. DB(Dual Band) small repeater, which is currently used in the field for indoor coverage, is adopted as a test unit. For reducing the power consumption, PFC (Power Factor Correction) is included on SMPS (Switching Mode Power Supply) of the DB small repeater. The test results show that approximately 38.9% of the power consumption is reduced comparing with the repeater without PFC. It means that approximately 230.43kWh per unit can be saved annually.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.3 no.1
• /
• pp.84-89
• /
• 2004

This study is a basic one for application of ER Fluid to fluid power systems. By mixing silicone oil with zeolite particles, four kinds of ER fluids were made, in which the weight ratio of zeolite particles are different. We examined how the Yield shear stress and Bingham characteristics of the ER fluids are effected by varying electric field intensity. We designed and constructed a disk type power transmission clutch in which ER fluid fills and this ER fluid transmits the power of drive shaft to the driven shaft. With this equipment, the revolution transmission ratio from the chive shaft to the driven shaft by varying electric field density of the ER fluid was examined.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.10
• /
• pp.2000-2004
• /
• 2009

In general, for the condition monitoring of a power transformer using the UHF PD measuring technique, detection of any partial discharge, identifying the defect in the transformer and locating the insulation defect are necessary. In this paper one of the most frequent detects which can result in turn to turn fault in power transformer was examined for identifying the defect. In order to model the defect, as a discharge source, a partial discharge cell was used for experimental activity. Magnitude of electromagnetic wave signals and corresponding amount of apparent discharge were measured simultaneously against phase of applied voltage to the discharge cell. Frequency range and phase resolved partial discharge signals were measured and analyzed. The results will be contributed to build the defect database of power transformer and to decrease the occurrence of transformer faults.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.10
• /
• pp.879-883
• /
• 2009

This paper was provided to help in detecting defects in power transformer. For this purpose, a partial discharge cell was designed and manufactured as a discharge source to simulate particle defected paper-oil insulation in power transformer. Experimental set-up for measuring PD signals was described. Magnitude of electromagnetic wave signals and corresponding amount of apparent discharge were measured simultaneously against phase of applied voltage to the discharge cell. Frequency range and pattern of PRPD(Phase Resolved Partial Discharge) of partial discharge signals were examined and analyzed. The results will be contributed to build the defect database of power transformer and to decrease the substation faults.

• Journal of Radiation Protection and Research
• /
• v.45 no.4
• /
• pp.147-153
• /
• 2020

Background: Malawi's 2018 National Energy Policy includes nuclear power as an energy option with an operational 100 MW targeted for 2035. Materials and Methods: This paper challenges the scope of the policy on nuclear power by reviewing its implementation strategy and comparing it to: the strategy established for coal in the same policy; some experiences from other countries; and documents by the International Atomic Energy Agency (IAEA) relating to establishing a national position on nuclear power and infrastructural requirements for a nuclear power program. Results and Discussion: It is found that the pro-nuclear position is uninformed, and targets are unrealistic owing to a lack of understanding of nature of nuclear power including the requirements for safety, security and safeguards, and nuclear infrastructure. It is apparent that neither consultation nor a proper analysis were comprehensively conducted for nuclear. Though the national energy policy suggests a national position for nuclear energy, the content does not demonstrate that the position was arrived at knowledgeably. Conclusion: Thus, nuclear power may presently be viewed as a potential energy option that is yet to be seriously considered. It is important to build an appropriate level of literacy on nuclear science and technology for policy makers, key stakeholders, and the public to be better positioned for strategizing on nuclear power.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.6
• /
• pp.834-844
• /
• 2012

Nonlinear electronic loads draw harmonic currents from the power grids that can cause energy loss, miss-operation of power equipment, and other serious problems in the power grids. This paper proposes a harmonic compensation method using multiple distributed resources (DRs) such as small distributed generators (DGs) and battery energy storage systems (BESSs) that are integrated to the power grids through power inverters. For harmonic compensation, DRs should inject additional apparent power to the grids so that certain DRs, especially operated in proximity to their rated power, may possibly reach their maximum current limits. Therefore, intelligent coordination methods of multiple DRs are required for efficient harmonic current compensation considering the power margins of DRs, energy cost, and the battery state-of-charge. The proposed method is based on fuzzy multi-objective optimization so that DRs can cooperate with other DRs to eliminate harmonic currents with optimizing mutually conflicting multi-objectives.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.253-258
• /
• 2006

The Korean peninsula has been known to be very difficult to acquire clean MT and GDS data due to its highly industrialization and civilization. In this environment, a pre-screening step selecting data segments with a proper S/N ration is an essential one. This study modified the automatic pre-screening step based on the spectral power of electromagnetic field (RMP) taking account of the situation of the Korean Peninsula. The modified RMP technique was applied to MT data measured at seven sites located in middle part of the peninsula. In the whole sense, the RMP technique considerably improved the connectivity of apparent resistivity and phase curves around the period of 10 sec. In addition, the results processed by the RMP technique showed a very little difference with those derived from manual editing, and the superior performance of it is found especially in the connectivity of apparent resistivity curve.