• Nuclear Engineering and Technology
• /
• v.38 no.6
• /
• pp.459-482
• /
• 2006

A geochemical approach to the long-term safety of waste disposal is discussed in connection with the significance of actinides, which shall deliver the major radioactivity inventory subsequent to the relatively short-term decay of fission products. Every power reactor generates transuranic (TRU) elements: plutonium and minor actinides (Np, Am, Cm), which consist chiefly of long-lived nuclides emitting alpha radiation. The amount of TRU actinides generated in a fuel life period is found to be relatively small (about 1 wt% or less in spent fuel) but their radioactivity persists many hundred thousands years. Geological confinement of waste containing TRU actinides demands, as a result, fundamental knowledge on the geochemical behavior of actinides in the repository environment for a long period of time. Appraisal of the scientific progress in this subject area is the main objective of the present paper. Following the introductory discussion on natural radioactivities, the nuclear fuel cycle is briefly brought up with reference to actinide generation and waste disposal. As the long-term disposal safety concerns inevitably with actinides, the significance of the aquatic actinide chemistry is summarized in two parts: the fundamental properties relevant to their aquatic behavior and the geochemical reactions in nanoscopic scale. The constrained space of writing allows discussion on some examples only, for which topics of the primary concern are selected, e.g. apparent solubility and colloid generation, colloid-facilitated migration, notable speciation of such processes, etc. Discussion is summed up to end with how to make a geochemical approach available for the long-term disposal safety of nuclear waste or for the performance assessment (PA) as known generally.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.4
• /
• pp.235-240
• /
• 2010

The foam produced by the effluent cooling water which is released to the discharge channel provokes civil complaints due to the visual pollution to the neighboring residents. In this study, a physical model test was conducted by placing tetrapods on the bottom slope of the discharge channel in order to suggest an effective method of reducing the amount of generated foam. Field application of the main results of the model test showed qualitatively apparent reduction of the foam generation at the discharge channel.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.2
• /
• pp.25-33
• /
• 2010

Collision between vessels may lead to structural damage and penetration of hulls. The structural damage of a hull may eventually bring about global collapse of the hull girder and outflow of oil, which would contaminate seawater. Therefore, various regulations require the strength of a vessel after collision to satisfy given criteria, and owners usually request collision analyses to confirm the structural safety of their vessels. In the process of designing a vessel to satisfy the collision strength criteria, the strength has been assessed mostly by conducting collision analyses using numerical techniques, such as dynamic, non-linear, finite-element analysis. Design is an inherently iterative process during which many changes are necessary due to the endless needs for reinforcement and modification. Numerical techniques are not adequate for coping with a situation in which collision analysis is frequently required to provide the revised results that reflect the repetitive changes in designs. Numerical techniques require a lot of time and money to conduct in spite of recent improvements in computing power and in the productivity of modeling tools. Therefore, in this paper, an analytical technique is introduced and a collision problem is idealized and simplified using reasonable assumptions based on appropriate background. The technique was applied to an example of an actual FPSO and verified by comparing the results with results from the numerical technique. A good correlation was apparent between the results of the analytical and numerical techniques.

• Preventive Nutrition and Food Science
• /
• v.21 no.4
• /
• pp.367-372
• /
• 2016

To understand the effects of adding different gums (guar, xanthan, and locust bean gums) on naked barley flour (NBF), the rheological and pasting properties of NBF-gum mixtures were measured at different gum concentrations (0, 0.3, and 0.6% w/w). Steady shear rheological properties were determined by rheological parameters for power law and Casson models. All samples showed a clear trend of shear-thinning behavior (n=0.16~0.48) and had a non-Newtonian nature with yield stress. Consistency index, apparent viscosity, and yield stress values increased with an increase in gum concentration. Storage modulus values were more predominant than loss modulus values with all concentrations of gums. There is a more pronounced synergistic effect of elastic properties of NBF in the presence of xanthan gum. Rapid visco analyser pasting properties showed that the addition of gums resulted in a significant increase in the peak, breakdown, setback, and final viscosities, whereas the pasting temperature decreased.

• Journal of Nutrition and Health
• /
• v.33 no.8
• /
• pp.787-793
• /
• 2000

The purpose of the present study was to investigate effects of kochujang and red pepper on energy intake, body fat content and energy expenditure in rats fed on high-fat(30%) diet. Kochujang and red pepper power were added in the high-fat diet, adjusting the level to 95 and 22g/kg diet, respectively, The level of red pepper addition was corresponding was corresponding to the level of the content of red pepper powder in the kichujang-added diet. Kochujang induced a 30% reduction in body fat gain which was associated with a significant increase in energy expenditure. However, red pepper reduced body fat gain by only 15%. Furthermore, energy expenditure was not affected by red pepper. Metabolizable energy intake, apparent digestibility and body protein gain were not affected by either kochujang or red pepper. It has been known that capsaicin, a pungent component of red pepper, enhances activity of brown adipose tissue through increasing protein content. In the present study, in addition of protein content, DNA content of interscapular brown adipose tissue was also increased by kochujang. Therefore, it appeared that the anti-obesity effects of kochujang was greater than those of red pepper, indicating more than red pepper was involved in the expression of the anti-obesity effects of kochujang(Korean J Nutrition 33(8) : 787-793, 2000)

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.9
• /
• pp.1220-1228
• /
• 2003

The mirage technique is proved to be powerful in measuring the thermal diffusivity of materials. In particular, its contactless nature makes it suitable for delicate samples and microscale structures. In this study, thermal-wave-coupling method is developed in a general form for both thermally thin and thick samples. In the suggested measuring scheme, the probe beam can be positioned close to the pump beam and the absolute position need not be measured. Therefore the new scheme provides a relatively simple yet effective way to determine the thermal diffusivity of thermally thick samples. Thermal diffusivities of bulk samples like Ni and Al were measured and the characteristics of mirage signal for a thin film were observed by using the mirage experimental setup. The apparent thermal diffusivity was measured by varying such parameters as probe beam height, size of pump beam, power of pump beam, and surface condition of sample. From the practical standpoint, it is shown that the size of the pump beam is the most important factor for accurate thermaldiffusivity measurement. Experiments using thin-film samples show that the thermal diffusivity of a substrate covered with thin film can be measured by photothermal mirage signals.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.107-108
• /
• 2010

Uncertainty and insecurity is a serious issue in all aspects of our society today as the change in environmental and societal conditions became more apparent than ever before through various disasters. Thus, it is now an important point in time for the government and responsible firms to implement an innovative scientific disaster management method that can lead to establishing a more secure and stable future. Therefore, authors have developed ubiquitous- based disaster prevention automation system(DPAS). The system would follow up after sensors detecting fires, thefts, torrents, floods, and infrastructural leaks. It prevents disasters in advance by utilizing a wireless communications net or ethernet to conduct real-time monitoring from a remote place. The system also has an advantage as it is designed in a compact size that applies a precision-focused programmable logic controller(PLC) of one-chip type.

• Tribology and Lubricants
• /
• v.11 no.5
• /
• pp.162-171
• /
• 1995

The application of reciprocating engine crankshaft bearings is of particular importance and interest among the plain bearing, not only because the sheer volume of intemal combustion engines now produced, but because the severe operating conditions they are subjected to. Demands for better performances of crankshaft bearings have provide an important impetus in the development of bearings and bearing materials. As engine design progresses toward higher outpt and higher efficiency, crankshaft bearings must perform under more seveve operating conditions. Higher load, temperature, and speed as well as lower viscosity oil are applied to the bearing sysem, resulting in a smaller minimum oil film thickness. This means more solid-solid contact between the shaft and bearing, and the bearing is exposed to more danger of seizure. Some engines may experience bearing seizure problems. However, understanding about the seizure behavior and mechanism is far from being enough. Seizure resistance of a bearing-shaft system will be affected by the properties of the shaft and bearing, especially their materials and surface texture. Commonly used engine bearing materials include Al-Pb-Si, Al-Sn-Si, Al-Sn, and Cu-Pb with Pb-Sn-Cu overlay. These materials have very different properties. They showed different behaviors dering seizure tests and seizure may occur with different mechanism for different bearing material. Shaft materials also affect the seizure resistance of the system. Surface texture of the bearing and shaft have apparent effects on the lubrication and solid-solid contact pattern, and therefore will affect the seizure behavior of the system. Bearings and shafts which are made of different materials and have different surface textures have been tested and analyzed. Their effects on seizure resistance are discussed and possible seizure mechanisms for different beatings are presented in this paper.

• Korean Journal of Food Science and Technology
• /
• v.19 no.2
• /
• pp.97-101
• /
• 1987

Physicochemical properties of heat-moisture (18, 21, 24 and 27%) treated naked barley (Youngsanbori) starch indicated that crystailinity of the starch was decreased upon treatment and water-binding capacity drastically increased as the moisture level increased. The swelling power was decreased, but the solubility increased by heat-moisture treatment. Apparent viscosity in aqueous sodium hydroxide solution was repressed as moisture-treatment level increased. Amylograph hot paste vicosities were decreased upon treatment except initial pasting temperature.

• Journal of the Korean Society of Food Culture
• /
• v.12 no.4
• /
• pp.375-382
• /
• 1997

The establishment of optimal producing condition for rice-based infant foods using modified rice powder was attempted. The modification of rice powder was prepared by microwave heating as well as partial enzymatic hydrolysis. Not only thermal treatment but also enzymatic hydrolysis on rice powder increased D.E. value from 1.25 to 3.81. The water binding capacity, swelling power, solubility, digestibility by ${\alpha}-amylase$, light transparency, and paste clarity of the modified rice powder compared to unmodified rice powder were increased from 107% to 249%, from 7.80 to 42.52, from 0.04% to 0.89ft, from 9.19% to 23.01, from 33% to 42%, and from 2.2% to 3.9%, respectively. On the other hand, gelatinization temperature, apparent viscosity, and degree of retrogradation of modified rice powder showed negative correlation with D.E. value. The 「results suggested that the thermal and enzymatic treatment on rice powder improved the physicochemical properties of rice based infant food by enhancing carbohydrate absorptionability and lowering the viscosity and opacity.