• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.8
• /
• pp.18-26
• /
• 2012

Recently, there have been suggestions that power factor should be considered to increase the efficiency of electric power supply when evaluating the performance of the electric appliances in standby mode and the related studies have been conducted to improve the efficiency standard of standby power. But, they lack the analysis of the standby power characteristics with the changes of power factor. This study is conducted to analyze the standby power characteristics of TV which is a typical home appliance and reaches a conclusion that the apparent power can be a more reasonable index which reflects the efficiency of electric power supply. It is also found that LED TVs show the best performance in standby mode. Moreover, an example to set standby power standards on TVs to be applied in the future is suggested, considering the energy efficiency policies for appliances.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.343-344
• /
• 2010

This study compares the apparent activation energy(Ea) by ASTM C 1074 with that by setting time. As the result of this study, it is found that Ea by setting time was ranged from 15~21 KJ/mol. This value is smaller than that 30~50 KJ/mol by ASTM C 1074.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.04a
• /
• pp.187-191
• /
• 2000

High temperature creep behaviour of Al-5 wt% Mg alloy reinforced with 7.5% BN flakes was studied. The composite specimens showed two main creep characteristics : (1) the value of the apparent stress exponent of the composite was high and varied with applied stress (2) the apparent activation energy for creep was much larger than that for self-diffusion in aluminum The true stress exponent of the composite was set equal to 5. Temperature dependence of the threshold stress of the composite was very strong. Which could not be rationalized by allowing for the temperature dependence of the elastic modulus change. AIN particles which were incorporated into the Al matrix during fabrication of the composite by the PRIMEXTM method were found to be effective barriers to dislocation motion and to give rise the threshold stress during creep of the composite

• Computers and Concrete
• /
• v.12 no.4
• /
• pp.377-392
• /
• 2013

This paper investigates prediction models estimating the hydration properties of concrete, such as the compressive strength, the splitting tensile strength, the elastic modulus,and the autogenous shrinkage. A prediction model is suggested on the basis of an equation that is formulated to predict the compressive strength. Based on the assumption that the apparent activation energy is a characteristic property of concrete, a prediction model for the compressive strength is applied to hydration-related properties. The hydration properties predicted by the model are compared with experimental results, and it is concluded that the prediction model properly estimates the splitting tensile strength, elastic modulus, and autogenous shrinkage as well as the compressive strength of concrete.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.3
• /
• pp.362-369
• /
• 2009

Esterification reaction between succinic acid and 1,4-butanediol was kinetically investigated in the presence of monobutyl tinoxide catalysts at $150{\sim}190^{\circ}C$. The reaction rates measured by the amount of distilled water from the reaction vessel. The esterification reaction was carried out under the first order conditions with respect to the concentration of reactants, respectively. The overall reaction order was 2nd. The linear relationship was shown between apparent reaction rate constant and reciprocal absolute temperature. By the Arrhenius plot the activation energy have been calculated as 87.567 kJ/mol under monobutyl tinoxide catalyst and also apparent reaction rate constant, k' was found to obey first kinetics with respect to the concentration of catalyst.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.105-107
• /
• 2012

This study was conducted to investigate the strength development of fly ash concrete using the strength development estimation for the ready mixed concrete for construction of nuclear reactors. The findings are as follows. First, the higher the curing temperature becomes, the shorter the setting time becomes. In addition, the compressive strength also increased as the curing temperature gets higher. The apparent activation energy derived from ASTM C 1074 showed 34.75 KJ/mol. The results of concrete strength estimation confirmed that Gompertz model formula has good accuracy.

• Journal of the Korean Ceramic Society
• /
• v.35 no.6
• /
• pp.569-574
• /
• 1998

The thickness of flame zone reaction rate and apparent activation energy in the formation reaction of $Ti_3AI$ intermetallic compound were investigated using SHS method which sustains the reaction spontaneously and utilizes the heat generated by thye exothermic reaction itself. In this reaction the thickness of flame zone was 1.4 mm and the reaction rate was $0.4g/\textrm{cm}^2{\cdot}sec$. Also the apparent activation energy calculated using from the experimental data obtained by controlling the realtive green density was 40kJ/mol.

• Journal of the Korean Society of Safety
• /
• v.16 no.3
• /
• pp.83-88
• /
• 2001

This study was preformed by measuring the minimum ignition temperature of MBS according to the change of sample vessel size and the minimum ignition temperature of MBS dust cloud The minimum ignition temperature of MBS product decreased as the vessel size was large, and it was obtained in the range from $120.5^{\circ}C$ to $94.5^{\circ}C$ and the apparent activation energy was obtained with 32.94Kcal/mol. The minimum ignition temperature of MBS dust cloud was measured by using Godbert-Greenwald furnace and it was obtained at $407^{\circ}C$ with the sample of 0.4g in the air and the ignition of dust cloud was not occurred below 13% oxygen concentration.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.3
• /
• pp.111-117
• /
• 2008

This study provides the setting time prediction method of super retarding concrete incorporating mineral admixtures at the same time including fly ash(FA), blast furnace slag(BS) based on maturity method. The setting time was retarded, as super retarding agent contents increase and curing temperature decreases. In addition, apparent activation energy by Arrhenius function was ranged from $24{\sim}35KJ/mol$ with slightly difference along with mixture proportion. This value is smaller than existing value $30{\sim}50KJ/mol$. It is Indicated that equivalent age using setting time can be a proper method to predict setting time and it also exhibited comparable relativity between prediction value and measurement value. Therefore, this study provided setting time prediction value with super retarding agent contents and mineral admixture combination. Setting time prediction equation provided herein is possibly valid for estimating precise setting time of the super retarding concrete at the job site.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.5
• /
• pp.119-125
• /
• 2008

In this paper, the estimation of super retarding concrete incorporating mineral admixtures at the same time including fly ash(FA), blast furnace slag(BS) are studied based on maturity method. The setting time was retarded, as super retarding agent contents increase and curing temperature decreases. In addition, apparent activation energy by Arrhenius function was ranged from $24\sim35$ KJ/mol with slightly difference along with mixture proportion. This value is smaller than existing value $30\sim50$ KJ/mol. Based on strength development estimation. it exhibited comparable relativity between prediction value and measurement value. Therefore, this study provided effective strength development prediction value with super retarding agent contents and mineral admixture combination. Strength development prediction equation provided herein is possibly valid for estimating accurate strength development of the super retarding concrete at the job site.