• Journal of the Semiconductor & Display Technology
• /
• v.11 no.2
• /
• pp.39-43
• /
• 2012

This paper presents a study on the design of a pulling module for silicon ingot and an apparatus of manufacturing silicon single crystal ingot using the same method. The pulling module is conceptually designed by using TRIZ. Czochralski method(CZ) is representative way to manufacture single crystal ingot for wafers. The seed can be broken by high tension which is caused by large weight of a silicon ingot. The solution of this problem has been derived using 6SC(6 steps creativity)TRIZ. The pulling module is actuated by DC motor and rollers. High tension in the seed is removed by the rotate-elevate motion of rollers in the pulling module. A rubber belt is included in the rotate-elevate mechanism for increasing friction between rollers and silicon ingot.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.09a
• /
• pp.433-440
• /
• 2000

Barium ferrite particles were synthesized from Ba(NO$_3$)$_2$, Fe(NO$_3$)$_3$ and KOH mixed solutions using hydrothermal crystallization in supercritical water. The experimental apparatus for production of barium ferrite is a flow-type apparatus. Fine barium ferrite particles were produced because supercritical water causes the metal hydroxides to be rapidly dehydrated before significant growth takes place. The effects of Fe/Ba ratio and reaction time on the formation, particle size, and magnetic properties of barium ferrite were studied. When Fe/Ba ratio were varied from 0.5 to 12, single-phase barium ferrite powder was only produced in the range of 0.5〈Fe/Ba〈2. Also, with elevating reaction time, the BaO.6Fe$_2$O$_3$ particle size grew smaller. Especially, uniform barium hexaferrite particles of size 100-200nm were obtained at 80sec. In this study, therefore, single-phase barium ferrite particles are highly stable and can be produced continuously in a reaction time of less then 2min.

• Korean Journal of Bronchoesophagology
• /
• v.6 no.1
• /
• pp.96-101
• /
• 2000

It is commonly believed that the branchial anomalies are remnants of the branchial apparatus. Third and fourth branchial pouch anomaly is an extremely rare disease involving the branchial apparatus. Virtually mostly reported cases have been on the left side and has been identified in recurrent suppurative thyroiditis, retropharyngeal abscess and repeated episodes of cellulitis, neck swelling, lateral neck fistula. Recently the authors have experienced a case of left piriform sinus fistula accompanied with left suppurative thyroiditis, presumably of fourth branchial origin in a 50-years old male patients, which was successfully treated with coagulation, and so report this case with summary of branchial anomaly by the some review of the literatures.

• The Korean Journal of Zoology
• /
• v.33 no.2
• /
• pp.127-132
• /
• 1990

The visual discrimination ability of Vespertilio superans was investigated with a male and a female. In a controlled experimental situation (two-choice apparatus), using a vertical bar and a circle of the same area of the bar, it was established that discrimination between different shapes of the same size was impossible. However, with patterns in which the surface areas substantially differed, the bats were able to discriminate between them to a statistically significant degree. Continuing with experiments in which the lightness of the 2 paritems was varied, the disrimination was possible with all but the slightest differences in lightness (a difference of lightness value 2).

• YAKHAK HOEJI
• /
• v.31 no.5
• /
• pp.286-295
• /
• 1987

The relationship between in vitro release and in vivo bioavailability of acetaminophen from suppositories was investigated. Effect of glycyrrhizin on the drug release and rectal absorption in rats was also examined. Suppositories containing 25mg of acetaminophen were prepared with Wecobee FS (fatty base) or PEG (water-soluble base) bases. The release from the suppositories were determined with USP rotating basket dissolution apparatus and with the suppository release tester. The temperature of the dissolution medium was very critical for the dissolution of acetaminophen from Wecobee FS suppositories. The bioavailability of acetaminophen was calculated from the plasma concentration-time curve after rectal administration of the suppositories to the rats. There were no significant differences in AUC following rectal administration of Wecobee FS and PEG suppositories, but the release and absorption from the Wecobee FS suppositories were faster than those from PEG suppositories. The dissolution rate obtained by the suppository release tester was better correlated with in vivo absorption rate constant than that by the USP dissolution apparatus. It suggests that the partitioning between rectal fluid and suppository base is the rate-limiting step in the rectal absorption of acetaminophen from suppositories. Glycyrrhizin was found not to affect in vitro dissolution and rectal absorption of acetaminophen.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.6
• /
• pp.138-145
• /
• 2007

Among various rapid prototyping processes, stereo-lithography process which can manufacture transparent prototype is known to be the greatest in the form & dimensional accuracy and surface roughness. In this paper, bench mark tests of 4 stereo-lithography-type rapid prototyping apparatus were carried out using transparent materials. The test includes measurement of mechanical properties, form accuracy, building speed and manufacturing cost. It was observed that ViperPRO of 3D systems is advantageous in the mechanical properties and building speed, RM600011 of CMET in sub-milli scale form accuracy and manufacturing cost, and relatively economical Eden500V of Objet is great in tensile strength at room temperature.

• Journal of Microbiology
• /
• v.38 no.2
• /
• pp.113-116
• /
• 2000

Escherichia coli F plasmid partition apparatus is composed of two trans-acting proteins (SopA and SopB) and one cis-acting DNA sequence (sopC). The SopB-sopC complex has been suggested to serve a centromere-like function through its interaction with chromosomally encoded proteins which remain to be identified. In this paper, we are introducing a new yeast 1.5-hybrid system which assembles the two-hybrid and one-hybrid system as a mean to find and additional component of the F plasmid partition system, interacting with DNA (sopC)-bound SopB protein. The results indicates that this system is a promising one, capable of selecting an interacting component.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.337-342
• /
• 2002

A new apparatus called the EFA (Erosion Function Apparatus) has been built and tested to measure the erodibility of fine-grained soils. The EFA is a simple test to predict the erosion rate of fine-grained soils along with the corresponding velocity and shear stress. In addition, it is advantageous in predicting the scour rate for actual soil samples from bridge sites. The plot of erosion rate versus shear stress is the result of an EFA test. It Indicates the critical shear stress at which erosion starts and the rate of erosion beyond that shear stress. In order to measure the erodibilities of various soils, 14 Shelby Tube soil samples are collected from the actual bridge sites and tested using the EFA. The results of the EFA tests which are the relationships between erosion rates and shear stresses are presented in this paper and research continues to develop the correlation between the erosion function and the soil properties.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.2
• /
• pp.283-288
• /
• 1996

This paper presents the development technology of standard shielded resistor divider for full lightning impulse voltage. The ability of large-capacity power apparatus to withstand lighting stroke is usually evaluated by means of full lightning impulse voltage. Lightning impulse voltage test has been essential to evaluate the insulation performance of electrical power apparatus. Recently international standard (IEC 60) on high voltage measurement techniques is being revised and requests a formal traceability of high voltage measurements. Therefore, general interest for this area has grown considerably during last years, and several international intercomparisons have already completed worldwide, i.e. Europe, Japan, America etc., In this viewpoint, we have also investigated the step response of the standard shielded resistor divider, which satisfies the IEC recommendation.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.318-322
• /
• 2002

In this paper the automatic plate forming system developed by the present research group is introduced, which would be helpful for other researchers. The present system consists of three parts : heating line information generation software, automatic heating apparatus and numerical control system. The numerical control system developed by the present authors is detailed. Performance test for the developed system has been carried out and good results has been obtained. As an extension of the present study, the present automatic plate fanning system will be applied to surfaces found in ship and offshore structure.