• 제목/요약/키워드: apex area

검색결과 194건 처리시간 0.032초

긴쑥부쟁이(국화과): 우리나라 미기록식물 (Aster hispidus Thunb. var. leptocladus (Makino) Mot. Ito et Soejima (Compositae): unrecorded plant to Korea)

  • 이강협;선은미;김별아;임형탁
    • 식물분류학회지
    • /
    • 제44권3호
    • /
    • pp.188-190
    • /
    • 2014
  • 대구광역시 팔공산에서 국화과 참취속의 1종인 Aster hispidus var. lleptocladus를 발견하여 긴쑥부쟁이로 명명하였다. 일본의 사문암지대에 유존적으로 분포하는 일본 고유종으로 알려져 온 긴쑥부쟁이는 모종인 갯쑥부쟁이와는 하부 경생엽이 좁고 선형이며 예두로써 털이 없으며, 두화와 총포의 지름이 좁고, 통상화의 관모 길이가 1-2 mm인 점이 다르다.

임베디드 플렛폼을 위한 TCP/IP 프로토콜 프로세서 설계 및 구현 (Design and Implementation of TCP/IP Protocol Processor for Embedded Flatform)

  • 배대희;김철회;정용진
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
    • /
    • pp.123-126
    • /
    • 2004
  • Demands on dealing with multimedia data through the network have been increased, and networking multimedia devices require processing, transmitting , and receiving the digital data. In order to implement the network for high performance and low cost, we may have to integrate the dedicated hardware into a system on a chip by spending an extra amount of silicon resource. In this paper, we describe hardware implementation of TCP/IP protocol stack which is now popular to connect multiple PCs and peripherals by means of networks. For evaluation we used ALTERA APEX 20K600EBC652 FPGA with 600,000 gates. The operating frequency is estimated 29.9MHz and it used area of $26\%$.

  • PDF

오면체 모양 절제법을 이용한 유두축소 (Nipple Reduction with a Pentahedral Excision Technique)

  • 홍윤기;심형보
    • Archives of Plastic Surgery
    • /
    • 제36권3호
    • /
    • pp.327-332
    • /
    • 2009
  • Purpose: Several methods of the nipple reduction have been reported. However, the methods described previously are difficult or have some demerits. This study proposes a simple technique for reduction of the nipple height as well as diameter. Methods: The purposed nipple height is marked. A pentahedral design of excision was marked around the nipple. Local anesthetic solution was infiltrated and a 4 - 0 Nylon traction suture was applied at the nipple apex. Excision of the nipple inside both two triangles and a rectangle was made. Remaining two flaps were approximated using 5 - 0 Nylon simple interrupted sutures. However, a part of wound closure was not done in the central area of the nipple. Results: 83 patients(166 nipples) underwent this procedure from December 1999 to December 2008. Follow up ranged from 6 months to 2 years with a mean of 10 months. 78 patients were female and 5 patients were male. No major complication occurred and remaining scars were very inconspicuous. Conclusion: This simple technique has the advantage of nipple reduction in both height and diameter, and provides good aesthetic outcomes.

멀티미디어를 이용한 의료용 영상 워크스테이션 (Medical Image Workstation Using Multimedia Technique)

  • 이태수;차은종
    • 대한의용생체공학회:의공학회지
    • /
    • 제15권1호
    • /
    • pp.63-70
    • /
    • 1994
  • A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors'reporting results. Input int'ormation was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and Analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed id'ormation can be transferred for patient diagnosis through LAN (local area network).

  • PDF

폴리머 원형 튜브 대상 미세 패턴 정수압 성형 (Micro Pattern Forming on Polymeric Circular Tubes by Hydrostatic Pressing)

  • 임성한
    • 소성∙가공
    • /
    • 제23권8호
    • /
    • pp.507-512
    • /
    • 2014
  • The objective of the current investigation is to establish techniques in micro pattern forming operations of polymeric circular tubes by using hydrostatic pressing. This method was developed and successfully applied to the micro pattern forming on polymeric plates. The key idea of the new technique is to pressurize multiple vacuum-packed substrate-mold stacks above the glass transition temperature of the polymeric substrates. The new process is thought to be a promising micro-pattern fabrication technique for two reasons; first, (hydro-) isostatic pressing ensures a uniform micro-pattern replicating condition regardless of the substrate area and thickness. Second, multiple curved substrates can be patterned at the same time. With the prototype forming machine for the new process, micro prismatic array patterns, 25um in height and 90 degrees in apex angle, were successfully made on the PMMA circular tubes with diameters of 5~40mm. These results show that this process can be also used in the micro pattern forming process on curved plates such as circular tube.

심근경색후 발생한 심실중격결손의 외과적 치료 -2례 보고- (Surgical Repair of Postinfarction VSD -Two Cases Report-)

  • 이용훈;최필조;우종수
    • Journal of Chest Surgery
    • /
    • 제28권6호
    • /
    • pp.623-629
    • /
    • 1995
  • Rupture of ventricular septum following myocardial infaction is one of the serious complication of coronary artery disease. The characteristic manifestations are sudden appearance of a harsh systolic murmur, precordial pain, cardiovascular collapse and permit early diagnosis. We report two cases of successful repair of postinfaction ventricular septal defect. The infarcted area was anterior wall of ventricle and VSD was placed near apex of heart in two cases all. VSD was closed with pledgetted Dacron patch and incised wall was sutured with Teflon felt and concomitant coronary artery bypass graft was done respectively .Postoperative courses were uneventful.

  • PDF

Light Output Characteristics of Rounded Prism Films in the Backlight Unit for Liquid Crystal Display

  • Lee, Won-Gyu;Jeong, Jin-Ha;Lee, Ji-Young;Nahm, Kie-Bong;Ko, Jae-Hyeon
    • Journal of Information Display
    • /
    • 제7권4호
    • /
    • pp.1-4
    • /
    • 2006
  • The optical performances of rounded prism films were investigated using a ray tracing technique. The angular distribution of the luminous intensity was obtained as functions of the prism pitch and the curvature of rounded apex and valley of prism arrays. The gain of the on-axis luminance decreased with decreasing curvature (increasing diameter) and pitch. The existence of the curved area on the prism film decreased the recycling efficiency of the prism film, i.e., the rays which would otherwise have been recycled through total internal reflections via the prism surfaces were refracted on the curved regions and redirected toward directions other than the on-axis direction. Quantitative correlation between the luminance gain and the curvature in addition to the prism pitch was obtained, which might serve as basic data for the optimization of prism films and the manufacturing processes.

백서(白鼠)의 구치부기능상실(臼齒部機能喪失)이 과두발육(顆頭發育)에 미치는 영향(影響)에 관(關)한 실험적(實驗的) 연구(硏究) (EXPERIMENTAL STUDY OF THE EFFECT ON THE RAT'S CONDYLAR DEVELOPMENT WITH THE LOSS OF FUNCTION IN MOLAR)

  • 김재형
    • 대한치과교정학회지
    • /
    • 제9권1호
    • /
    • pp.111-115
    • /
    • 1979
  • The author intended to observe the developmental pattern in mandibular bone and condyle following the loss of function of molar with 5 week-old rats b y means of removing the crown of molar. The bjects were observed everyweek during six weeks. The results were as follows ; 1. Bone apposition was observed at the root apex and interadicular area of alveolar bone. 2. Development of bone substance in mandible tended to increase in the narrow bone trabeculae and fibrous bone substance. 3. Development of condylar head showed little difference from that of control group and development of calcified zone appeared more or less poorly.

  • PDF

근관충전제가 치근단위조직에 미치는 영향에 관한 실험적 연구

  • 최호영
    • 대한치과의사협회지
    • /
    • 제18권9호통권136호
    • /
    • pp.739-745
    • /
    • 1980
  • The histologic responses of periapical tissues to root canal fillings with Grossman sealer were studied 10 dogs. Root canal fillings were performed on the 20 lower and upper teeth. The animals were sacrificed 1,2,3,4 and 5 weeks after the completion of operation. The following results were based on histopathologic studies; 1) After 1 week, the necrosis of dentin and cementum surrounding root apex was found in the root canal fillings. 2) After 2 weeks, the necrosis of cementum and surrounding alveolar bone were revealed. The resorption of dentin was appeared partially. 3) After 2 weeks, newly formed dentin was appeared surrounding necrotic dentin. 4) After 4-5 weeks, the osteoblastic activity was revealed abundantly surrounding the alveolar bone. 5) Fibrosis was prominantly appeared surrounding over-filled area, and fibrous encapsulation was performed.

  • PDF

하드웨어 기반의 H.264/JVT 변환 및 양자화 구현 (Hardware Implementation of Transform and Quantization for H.264/JVT)

  • 임영훈;정용진
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
    • /
    • pp.83-86
    • /
    • 2003
  • In this paper, we propose a new hardware architecture for integer transform, quantizer operation of a new video coding standard H.264/JVT. We describe the algorithm to derive hardware architecture emphasizing the importance of area for low cost and low power consumption. The proposed architecture has been verified by PCI-interfaced emulation board using APEX-II Altera FPGA and also by ASIC synthesis using Samsung 0.18 ${\mu}{\textrm}{m}$ CMOS cell library. The ASIC synthesis result shows that the proposed hardware can operate at 100 MHz, processing more than 1, 300 QCIF video frames per second. The hardware is going to be used as a core module when implementing a complete H.264 video encoder/decoder ASIC for real-time multimedia application.

  • PDF