• Corrosion Science and Technology
• /
• 제15권5호
• /
• pp.209-216
• /
• 2016

In the present study, chitosan based self-healing anticorrosion coatings were prepared by layer by layer (lbl) addition of chitosan (Ch) and polyvinyl butyral (PVB) on mild carbon steel substrate. Chitosan coatings exhibited enhanced coating stability and corrosion resistance in aggressive environments by the application of a PVB top layer. Chitosan layer in the lbl coatings have been modified by using glutaraldehyde (Glu) and silica ($SiO_2$). Performance of different coatings was tested using electrochemical impedance spectroscopy and immersion test. The best anticorrosion performance was observed in case of 10 % Ch_$SiO_2$_PVB coatings, which withstand immersion test over 25 days in 0.5 M salt solution without visible corrosion. 10 % Ch_$SiO_2$ coatings without the PVB top layer didn't last more than 3days. Application of PVB top layer sealed the defects in the chitosan pre-layer and improved its hydrophobic nature as well. Raman spectra and SEM of steel surfaces after corrosion study and removal of PVB_Ch/Glu_PVB coatings showed a passive layer of iron oxide, attributing to the self-healing nature of these coatings. Conducting particle like graphene reinforcement of chitosan in the lbl coatings enhanced corrosion resistance of chitosan coatings.

• 한국응용과학기술학회지
• /
• 제25권4호
• /
• pp.485-494
• /
• 2008

The acrylic coating emulsions were prepared by the emulsion polymerization to protect the surface of steel plate from the corrosion chemicals like acid, base and salt water. MMA(methyl methacrylate), styrene, BA(butyl acrylate), and 2-HEMA(2-hydroxyethyl methacrylate) were used as monomer. KPS(potassium persulfate) and SBS(sodium bisulfite) as redox initiator and SDBS(sodium dodecylbenzene sulfonate) as emulsifier were used on the emulsion polymerization reaction. The most stable in-situ coating was obtained when 10% of MMA was added. Both particle size and quantity in emulsion were decreased as increasing the mount of SDBS. the most stable prepared coating emulsion with polyisocyanate crosslinker showed very high anticorrosion properties on the coated steel layer to salt water, whereas no significant improvement of anticorrosion property to acdic and basic condition it showed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권3호
• /
• pp.341-350
• /
• 2012

In this paper we observe the protective coatings carbon for steel, aluminium and titanium alloys were obtained by plasma electrolytic oxidation (PEO) under unipolar and bipolar conditions. The anticorrosion properties and the thermal stability of the surface layers were studied by electrochemical impedance spectroscopy and potentiodynamic polarization. It was found that the application of the bipolar PEO mode enables one to synthesize the surface layers that possess enhanced anticorrosion and mechanical properties. results of research of antiscale PEO - coatings for marine power equipment are presented. The combined method of prevention of corrosion and scale formation was tested at the industrial plants of Russian Shipyard "Zvezda".

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.298-299
• /
• 2007

매설배관은 관련법규에 따라 방식(anticorrosion)상태나 배관의 효율적인 유지관리를 위하여 배관의 방식전위를 관로를 따라 주기적으로 측정하여 전철의 영향이나 타 배설배관 및 방식시스템의 상황이 파악되어야 한다. 일반적인 방식전위측정기는 토양비저항이 30 내지 40 $M{\Omega}$ 이상의 높은 지역에서의 방식전위측정 시 전위왜곡이 발생하여 정확한 방식상태를 판단하기 곤란한 경우가 있다. 이러한 장애를 극복하고자 입력임피던스를 100$M{\Omega}$으로 설계하여 방식전위 측정시의 왜곡을 개선 및 정확도를 높이고 방식유지관리에 반드시 필요한 직류 및 교류 전압, 전류, 접지저항, 주파수 등을 측정할 수 있는 방식전용 다기능 계측기를 개발하였으며, 이는 측정 및 휴대가 용이하여 현장에 도움을 주고 있다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.12-13
• /
• 2020

Construction projects and buildings are becoming taller and larger, and the size of water tanks of production facilities and high-rise buildings is also gradually increasing. Most large water tanks apply a waterproofing layer to the water tank type concrete structure. The application of polyurea coating materials, which are excellent in water resistance, chemical resistance, physical performance, rapid hardening, and workability is gradually increasing as waterproofing and anticorrosion layer for water tank. As a result, defects such as water leakage and damage to the waterproofing layer are continuously occurring, causing production disruption, setback to users. Therefore, it is required to review suitability through performance verification of the waterproofing and anticorrosion system.

• Corrosion Science and Technology
• /
• 제17권3호
• /
• pp.91-100
• /
• 2018

Development of biodegradable implants for treatment of complex bone fractures has recently become one of the priority areas in biomedical materials research. Multifunctional corrosion resistant and bioactive coatings containing hydroxyapatite $Ca_{10}(PO_4)_6(OH)_2$ and magnesium oxide MgO were obtained on Mg-Mn-Ce magnesium alloy by plasma electrolytic oxidation. The phase and elemental composition, morphology, and anticorrosion properties of the coatings were investigated by scanning electron microscopy, energy dispersive spectroscopy, potentiodynamic polarization, and electrochemical impedance spectroscopy. The PEO-layers were post-treated using superdispersed polytetrafluoroethylene powder. The duplex treatment considerably reduced the corrosion rate (>4 orders of magnitude) of the magnesium alloy. The use of composite coatings in inducing bioactivity and controlling the corrosion degradation of resorbable Mg implants are considered promising. We also applied the plasma electrolytic oxidation method for the formation of the composite bioinert coatings on the titanium nickelide surface in order to improve its electrochemical properties and to change the morphological structure. It was shown that formed coatings significantly reduced the quantity of nickel ions released into the organism.

• 한국농공학회지
• /
• 제25권2호
• /
• pp.67-75
• /
• 1983

The objectives of this paper were to measure the bond strengths of reinforced concrete in which the steel rods were coated with five different kinds of anticorrosion paints, and to compare their prevention effects in salt water. The paints used in the study were epoxy resin I . II . III, Z.R. P., and silicone resin, which were applied at rates recommended by the manufacturers. The bond strengths were measured on the 7-, 14-, and 28-th days after molding. Corrosion conditions of coated steel plate under fresh water, seawater, 10 % salt water, and 20% salt water, were inspected every month during four months test peoriods, respectively. The results obtained from tests are summarized as follows: 1. Paint-coating may reduce the bond strengths of reinforced concrete. Silicone resin paint showed some 20% reduction in the strength compared to those without the paint. However, the other paints seemed not to significantly affect the strength. 2. Picture analyses showed that epoxy resin I and II significantly prevented corrosion steel plates in seawater. Epoxy resin I and silicone resin coating did not do a good job in corrosion prevention. Z.R. P. paint was found to be moderate as preventive coating paint. 3. Varying soluble salt contents had little effects on the corrosion prevention of tested paints. 4. Epoxy resin I and II were found to be appropriate as a coating material to prevent the corrosion of steel rods in seawater. Z.R.P. may also be used for the purpose.

• 한국재료학회지
• /
• 제16권10호
• /
• pp.639-646
• /
• 2006

Over the last two decades, microbiologically influenced corrosion (MIC) of metallic materials has received considerable attention due to its serious effects on industrial field. In this context, it is important to devise control methods which inhibit biofilm formation on various metallic compounds and are compatible with environment. It was change of various conditions (duty cycle, current density, $AgNO_3$ concentration and pH) for injection of Ag particles in anodized Aluminum alloy pore using pulsed current. Optimal condition was obtained by means of FE-SEM, ICP analysis etc. The antibacterial metal's specimen were manufactured under optimal condition and this specimen were tested the antibacterial characterization and anticorrosion characterization. In result of test, we can confirmed that the antibacterial characterization and anticorrosion characterization of the specimens of injected Ag particles in anodized Aluminum alloy pore using pulsed current were better than the anodized Aluminum alloy specimens.

• 접착 및 계면
• /
• 제22권2호
• /
• pp.47-56
• /
• 2021

자기치유 소재를 이용하여 강판을 코팅하는 경우, 코팅 소재에 상처가 날 경우 스스로 상처를 치유하여 강판이 부식되는 것을 방지할 수 있다. 하지만 자기치유 과정에는 시간이 소요되며, 따라서 자기치유가 되기 전에 강판의 상처가 부식 될 수 있다. 본 연구에서는 가역적인 hindered urea bond(HUB)를 통하여 가교 결합을 형성하면서 동시에 부식 방지제로써 작용하는 DTBEDA를 이용하여 듀얼자기치유 메커니즘을 가지는 코팅 소재를 제조하였다. 또한 제조된 소재를 강판에 코팅하여 의료용 메스와 나노/마이크로 압입시험기를 통하여 스크래치에 대한 자기치유 성능을 확인하였으며, DTBEDA의 내부식성 효과를 전기화학 임피던스 분광법(EIS)을 통하여 분석하였다.

• 한국건설순환자원학회논문집
• /
• 제7권3호
• /
• pp.243-254
• /
• 2019

본 연구에서는 지금까지 공동주택 지하주차장 상부 슬래브에 적용하여 누수하자가 발생된 방수공법들의 문제점과 상부 슬래브의 특성을 고려한 요구조건을 검토하고, 이에 적합한 성능(안)을 선정하여 복합형 폴리우레아 공법을 대상으로 그 적합성 여부를 판단하고자 하였다. 검토결과, 공동주택 지하주차장 상부슬래브에는 (1) 균열 및 거동 대응성, (2) 바탕면 일체성, (3) 수직부 수밀 안정성, (4) 누름층 시공 용이성, (5) 충격 및 누름 대응성, (6) 차량 이동하중에 대한 대응성 등의 성능검토가 필요하겠다. 연질, 경질의 복합형 폴리우레아를 대상으로 요구조건에 해당하는 5가지 항목에 대한 평가를 진행한 결과 모두 조건에 부합하는 것으로 확인되었으며, 단일 공법으로 적용함에 있어 문제점이 있던 재료들을 복합화 함으로서 각 재료의 장단점을 보완하여 효과적으로 적용할 수 있음을 확인하였다. 단, 실제 현장에 적용하기 위해서는 향후 Mock-up 평가 등 현장 적용성에 대한 추가적인 평가가 이루어져야 할 것이며, 복합화에 따른 경제성 및 유지관리성 측면에서의 검토를 통해 실제 시장 적용성 여부에 대한 후속적인 연구가 필요하겠다.