• 대한기계학회논문집A
• /
• 제33권10호
• /
• pp.1005-1013
• /
• 2009

In this paper, the performance improvement of a decentralized brake system for railway rolling stocks is investigated. In order to verify the effectiveness of the decentralized brake system, it is compared to the truck unit brake system which has only one control unit per a truck. The adaptive sliding mode control scheme is used to realize a robust anti-slip brake control system. Through computer simulations, it is verified that the decentralized brake system has better braking performance than the truck unit brake system.

• 동력기계공학회지
• /
• 제10권1호
• /
• pp.96-101
• /
• 2006

In ship operation the consequence of roll and pitchingmotion can seriously degrade the performance of mechanical and personnel effectiveness. So many studies for the roll stabilization and trimming control system design have been performed and good results have been achieved where the stabilizing fins, tanks, rudders and flaps are used. However the ultimate objective of such approach should be focused on improving the boarding sensitivity. But there may exist many unsolved problems, for examples, ship control performance degradation and increasing of system complexity. So, the achieved control performance could not give us enough comfortable boarding sensitivity where the residual rolling and pitching motion are main drawbacks. To get rid of these disadvantages, the main hull control systems design approach has been considered using semiactive absorber. In this system, dampers, spring, dynamic dampers and control system with sensors are incorporated. In our system considered in this study, just two motors and control system with sensors are used for the bed. And the control system can be installed on each bed. So, we can control every bed on the specified control objective respectively. Above all, the good advantages of this system are the facts followed from simple idea and usefulness. Of course the structural modifications are needed. Considering disturbances, we design control system and verify the usefulness of developed system from the experimental study.

• 동력기계공학회지
• /
• 제8권4호
• /
• pp.17-23
• /
• 2004

A delivery ship is used to handle the cargo with the crane to/from the ships. The ship is inclined in the direction of a cargo which is hung on a crane. In this case, a arc shaped rail should be in the equilibrium state to get good anti rolling performance. In this study, a device and control algorithm are developed to take accurate and quick equilibrium of the rail. The device is composed of a hinged immovable support and two screw jacks. And the control algorithm demands two controllers. One controller is designed such that the screw jack 1 and 2 follow the position reference signal generated by a tilt sensor. The other controller of two degree of freedom is designed to remove the synchronous error occurred between jack 1 and jack 2. The simulation results show that the desirable control performance is achieved.

• International Journal of Ocean System Engineering
• /
• 제3권1호
• /
• pp.10-15
• /
• 2013

A ship cruising in the ocean oscillates continuously due to wave action. In order to reduce the ship's roll, we developed a fin stabilizer as an anti-rolling device for a 500-ton-class high-speed marine vessel. During the development phase, it was necessary to set up control gains for the motion and hydraulic systems and assess the effectiveness of the anti-rolling performance on the ground. For this reason, a Target Simulator, which simulated the ship's motion, was given operator inputs such as the engine telegraph and waterjet deflection angle, and generated roll using a one-degree-of-freedom motion base. Hardware-In-the-Loop Simulation (HILS) was performed using the Target Simulator in order to confirm the various logics of the developed fin stabilizer, select initial control gains, and estimate the anti-rolling performance. In conclusion, it was confirmed that HILS was very helpful to develop the fin stabilizer because it could reduce the number of sea trial tests that were needed and could find many malfunctions in the factory a priori.

• 대한조선학회지
• /
• 제8권2호
• /
• pp.35-44
• /
• 1971

In terms of this paper, concerning primarily with the U-tube tank stabilizer, the authors' aim is to clarify and consolidate the theory as it has been developed thus far, and to provide with the certain additions which will make it more complete, more accurate, and more practical. And then we can know that the effect of the vertical tank position from the C.G., $a_{st}=1-w^2/{w^2}_{st}$, is very important, on account for the fact that the position factor, $a_{st}$, increase when the anti-rolling tank attaches to higher position vertically, but $a_{st}$ does not increase in proportion to the distance of the tank position. Measuring many characteristic coefficients by experiment, in the equation of the ship-tank system motion, such as the inertia coefficient, the damping coefficient, the natural frequency and so on, they can also give a guess that the higher position will accompany the non-linear motion of the tank water, but the non-linear effect will decrease the tank ability. In this study, they deal with not only the optimum damping coefficient of tank, which has very simply been expressed by the strength ratio, $\lambda$, but also the effect of the tank top, which has experimentally been treated when the water has hit the tank top. As this result, we can immediately find that the ability of the anti-rolling tank decrease at w/ws=0.9 generally low frequency.

• 대한조선학회논문집
• /
• 제52권2호
• /
• pp.135-142
• /
• 2015

The Anti-Rolling Tank(ART) has an advantage over the other roll stabilizing devices, when ship is staying and working at one site of sea. An important design point of ART is the tank tuning, that is, matching the tank natural period to the ship's roll natural period. Since the load condition and consequently the roll natural period of ship is to be changed widely, the natural period of ART also has to be changed widely. In case of the existing U-tube type ART with a single layer duct, the tank natural period can be changed in a relatively narrow range. This paper suggests a new U-tube type ART system using a double layer duct to enable wide change of ART natural period. Through the roll experiments performed in regular beam waves for a box-type model ship, it is shown that the double layer duct ART has about two times wider period range and a better reducing effect of roll magnitude than the single layer duct ART.

• 유공압시스템학회:학술대회논문집
• /
• 유공압시스템학회 2010년도 춘계학술대회
• /
• pp.93-97
• /
• 2010

Wheel skids may occur during train operations due to low adhesion at the wheel-rail contact point abnormally, and the skids, in turn, result in flats appearing on the wheels, which affect safety and ride comfort significantly. Thus, anti-skid control has a crucial role for safe braking and prevention from flats that could cause a disastrous train accident. This paper presents simulation studies on an anti-skid control unit (ASCU) with a brake system of a rolling stock including a pneumatic model for brake power supply and dump valve operation.

• 한국군사과학기술학회지
• /
• 제9권3호
• /
• pp.41-47
• /
• 2006

Naval combat system is total management system integrating a ship and several weapon system functions. For the mission of a ship, naval combat system manages features and constraints of each weapon system. Proper treats of each weapon system's conditions guarantee effective performances of naval combat system. In this paper, the relationship of anti-air weapon system's on board position and self-defence effectiveness against anti-surface missiles is studied

• 대한조선학회지
• /
• 제11권1호
• /
• pp.17-26
• /
• 1974

In this paper, authors investigate and analyze the effects of the anti-rolling tank which are calculated in accord with the tank damping coefficients by the computer, and which are represented with both the tank water's saturating state and the normal state in the irregular waves by analog computer. As the results of these studies, we immediately find that the tank optimum damping coefficient $b_{to}$, is 0.3877 due to calculating $\mu$-values, analyzing and comparing inclinations of $\mu$-values, and that although a nonlinear elements are included in the response character of the ship-tank system, the output is no longer Gaussian distribution, even when the sea waves are considered as Gaussian, and can not be expressed by the spectral forms which premise the superposition theory.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2006년도 추계학술발표회
• /
• pp.265-269
• /
• 2006

파랑에 의한 선박의 횡동요를 방지하는 감요장치는 크게 수동식과 능동식 으로 분류할 수 있으며 수동형 감요수조는 선박에서 가장 널리 사용되고 있다. 이 연구에서는 감요장치의 하부덕트유동에 관한 기초연구로서 덕트의 제어 댐퍼와 유입부의 유통에 대해 입자영상 유속측정장치를 이용하여 속도벡터분포에 관한 정량적인 데이터를 확보하였다. 그 결과 실험관 벽면에서 측정 된 압력의 분포는 디스크가 전개 상태인 0 도에서 45도까지는 입구 압력은 일정한 상태로 거의 변화하지 않았으나 약 60도 이상에서부터 압력 상승과 점차 급격한 변동현상이 나타났다.