• 구강회복응용과학지
• /
• 제19권4호
• /
• pp.317-323
• /
• 2003

When making crown and bridges on anterior regions, many practitioners consider the esthetics the most. For this reason functional aspect are not considered as much as the esthetics. If the occlusion on the anterior region are not formed correctly, movement of the temporomandibular joint can be disturbed and excessive stress can be occur that pathologic condition can be under lied. On this case presentation will show the importance of the anterior guidance and suggest the appropriate protocol of using customized anterior guide table. A 45years old male had to remake both of the upper central and lateral PFM because of the porcelain fracture. The new PFM crowns were made conventional methods without considering the anterior guidance. After the temporary setting, the patient complained of discomfort and short looking upper anteriors. To solve these problems we had to restore the palatal contour and length of the new crowns by making customized anterior guide table using temporary crowns that contains patient's old anterior guidance. This procedure which is copying the pt's comfortable anterior guidance to the final prosthesis made them to be esthetic and patients to feel comfortable.

• 대한치과교정학회지
• /
• 제24권3호
• /
• pp.555-567
• /
• 1994

The purpose of this study is to observe the effect of high pull headgear on the craniofacial structures of mixed dentition with Class II malocclusion. The cephalometric headplates of 16 children treated by high pull headgeaar during 6 months and 18 children during 12 months were traced, digitized and statistically analyzed. The results were as follows. 1. Inhibition of foreward growth of maxilla was observed in both group. 2. Clockwise rotation of maxilla was observed in both group. 3. There were distal movement of maxillary 1st molar and inhibition of alveolar bone growth of maxilla. 4. There was compensatory extrusion on mandibular 1st molar. 5. The ratio of anterior facial height to posterior facial height was almostly not changed. In the treatment plan of C II malocclusion by high pull headgear, ire must prevent the mandibulasr 1st molar from extruding and for orthopedic effect, at least 6 months is needed.

• 대한심미치과학회지
• /
• 제10권2호
• /
• pp.15-20
• /
• 2001

The spaced dentition is a common clinical finding. The careful analysis of clinically spaced dentition is a necessity for effective treatment planning. Spaced dentition often exists in the presence of intact teeth. Therefore, special care should be taken in order to obtain the most successful esthetic effect and to prevent overtreatment as well. The aesthetic restorative dental treatment using the porcelain laminate veneers is getting more popular than the complex orthodontic treatment, and prosthetic solutions that require sacrifice of sound tooth structure. The physical strength of porcelain laminate veneers is not as good as porcelain fused metal crowns, and more researches are needed in the field of bonding between composite cement and porcelain laminate veneer. However, the esthetic results from this unprepared porcelain laminate veneers were satisfactory with Authentic (Ceramay, Germany) pressable ceramic technique and resin cement (Rely X Veneer, 3M). This article deals with 2 cases of unprepared porcelain laminate veneers on anterior teeth.

• 대한치과의사협회지
• /
• 제39권6호통권385호
• /
• pp.456-461
• /
• 2001

• 대한치과교정학회지
• /
• 제23권1호
• /
• pp.101-113
• /
• 1993

For the purpose of interpretation of positional changes of craniofacial structures in Class III malocclusion between mixed and permanent dentition, 73 normal samples and 103 Class III samples of mixed dentition and 125 normal samples and 168 Class III samples of permanent dentition were selected. Comparative cephalometric analysis was undertaken between them respectively by mesh diagram method to evaluate the positional changes of maxilla and mandible in anteroposterior direction and vertical direction and also the inclination changes of maxillary and mandibular incisors in labio-lingual direction. The following results were obtained : 1. The antero-posterior positional changes of the maxilla and mandible were posterior direction of maxilla and anterior direction of mandible. 2. The vertical positional changes of the maxilla and mandible were superior direction of both maxilla and mandible. 3. The labio-lingual inclination changes of the maxillary and mandibular incisors were lingual direction of both maxillary and mandibular incisors.

• 대한소아치과학회지
• /
• 제31권4호
• /
• pp.569-578
• /
• 2004

본 연구는 유치열과 영구치열에서 구개의 길이, 폭, 깊이 및 치열궁의 형태 등을 조사하여 남녀간의 차이와 유치열과 영구치열간의 변화양상을 파악하는 것이다. 유치열기 아동 100명과 영구치열기 성인 100명 총 200명을 대상으로 하여 상악 석고 모형을 채득하고 3차원 laser scanner(SD Scanner, DS4060, LDI, U.S.A.)를 통한 석고 모델의 측정을 통해 cloud data, polygonization, section curve and loft surface, fit and horizontal plane (Surfacer 10.0. Imageware, U.S.A.)을 기초로 하여 구개의 폭, 길이, 높이 및 치열궁의 형태 등을 계측하였다. 통계학적 분석을 위해 t-tests가 사용되었다. 이에 다음과 같은 결론을 얻었다. 1. 구개의 계측항목에서 유치열 전방부 구개높이를 제외한 나머지 항목에서 남자가 여자보다 크게 나왔으며, 유치열은 전구개폭(p<0.05)과 후구개폭(p<0.01), 영구치열은 구개폭(p<0.05)과 전구개길이(p<0.01), 중구개, 후구개길이(p<0.05)에서 남녀간에 유의한 차이가 있었다. 2. 남녀의 구개지수에서 유치열에서는 구개장고지수(p<0.05)와 구개장폭지수(p<0.01)가 남녀간에 통계학적으로 유의한 차이가 있었다. 영구치열의 구개지수에서는 남녀간에 유의한 차이가 없었다. 3. 유치열과 영구치열의 계측항목 비교에서 후방부 구개폭이 가장 많이 증가하였으며, 다음으로 후방부 구개높이, 전방부 구개폭, 전방부 구개길이 순이었다. 전방부 구개높이와 후방부 구개길이는 오히려 감소하였다. 4. 유치열과 영구치열의 구개지수 비교에서 구개장고지수와 구개장폭지수, 후구개폭고지수는 영구치열에서 증가하였고, 나머지 지수는 감소하였다.보아 Er:YAG 레이저와 Chinese ink로 photosensitization을 시행한 후의 Nd:YAG 레이저 조사는 일정시간 동안 S. mutans의 증식과 산 생성능을 억제시키므로써 치아우식증 예방효과를 얻을 수 있다고 사료되나 억제효과가 오래가지 않아 임상적으로 효과를 얻기 위해서는 자주 조사를 해주어야 한다는 문제점을 안고 있어 임상적으로 치아우식증 예방이란 단독 목적으로 사용하기에는 실용성이 크지 않다고 사료된다.전자현미경 관찰에서 초음파 진동을 가한 군에서 resin tag의 길이가 길었고, lateral branch의 수도 많이 관찰되었다.TEX>$1\rightarrow6$ 결합이 주된 결합인 수용성 글루캔이었다. 이상의 결과를 종합하면 구강에서 분리된 Streptococcus salivarius 119에 의한 Streptococcus mutans의 인공치태 형성 억제작용은 수용성 글루캔 형성에 의한 것으로 사료되었다.동을 유도할 수 있다고 사료된다. 또한 이유식을 통한 다양한 식품의 경험 및 식품 섭취방법 등을 연습하는 과정을 통해 앞으로의 식생활 및 성장 발달에 영향을 미칠 것으로 사료된다. 따라서 영유아의 성장발달에 따른 적절한 영양교육의 실시가 보다 체계적으로 활성화 되어야 하겠으며 이를 위해 실제로 도움이 될 수 있는 구체적인 교육내용, 방법 및 도구의 개발이 요구된다.어서, B군은 A군,C군,D군과 비교하여 통계학적으로 유의성 있는 차이를 보였고(p<0.05), E군은 F군,G군과 비교하여 통계학적으로 유의성 있는 차이를 보였다(p<0.05). 3. 광중합형 및 자가중합형 교정용 전색제는 법랑질탈회 예방효과가 있었다. 4. 광중합형 및 자가중합형 교정용 전색제는 법랑질탈회 진행억제효과가 있었다. 5. 광중합형 및 자가중합형 교정용 전색제 표본에

• 대한치과보철학회지
• /
• 제28권2호
• /
• pp.91-108
• /
• 1990

The purpose of this study was to compare the maganitude of the discrepancies of the mounting errors in according to the states of dentitions, and to the superoinferior, anteroposterior, and rightleft driecetions. GROUP I. : Fourteen patients 22 to 26 years of age with a full complement of teeth, were used in the study. The criteria fro patient selection were a complete dentition, sparse restorarive treatment, and adequate posterior and anterior occlusan stops. And they had no sign and sympton at TMG area. GROUPII. : Eigth patients 37 to 62 years of age with bilateral free ends. The criteria for patient selection were Kennedy classification class 1 cases, and adequate posterior and anterior stops. And the opposite dentitions were a full complement of teeth. Irreversible hydrocolloid impresiion of each arch was taken of each patient. These were immediatel poured in stone and mounted on a Denar Mark II. Articulator with the arbitrary slidematic face-bow. With hand articulation th e mandibular cast was mounted to the maxillary cast in centric occlusion. Five types of interocclusal records were taken of each patient : (1) aluwax (2) baseplate wax; (3) znic oxide-eugenol pasts; (4) polyether (Ramitec); (5) modeling compound. All measurement of the five selected recording materials were compared with those of the hand-articulated full arch models in centric occlusion or maximum interdigitation. The results were as follows; 1. There were statistical differences in amount of devitation in according to the materials and the states of dentition. The amount of deviation of compound was the largest. 2. There were statistical differences in amount of deviation in complete dentition at all directions. The amount of diviation of compound was the largest. And at the right-left direction the amount of znic oxide-eugenol paste was larger than that of baseplate wax. 3. There was a statistical difference in amount of diviations in partial edentulous dentition at the superoinferior direction. The amount of deviation of compound was larger than that of znic oxide-eugenol paste. 4. There was as statistical difference in amount of deviations in partial edentulous dentition at the right-left direction. The amount of deviation of baseplate wax was larger that tnat of polyether. 5. There was not a statistical difference in amount of diviation in partial edentulous dentition at the anteroposterior direction.

• 대한치과기공학회지
• /
• 제41권3호
• /
• pp.211-217
• /
• 2019

Purpose: The purpose of this study is to evaluate the repeated measurement stability of scans related to dentition type. Methods: A normal model and the crowding and diastema models are also duplicated using duplicating silicon. After that, a plaster model is made using a plaster-type plaster on the duplicate mold, and each model is scanned 5 times by using an extraoral scanner. The gingival part and molar part were deleted from the 3D STL file data obtained through scanning. Using the 3D stl file obtained in this way, data is nested between model groups. Thereafter, RMS values obtained were compared and evaluated. The normality test of the data was performed for the statistical application of repeated measurements with dentition type, and the normality was satisfied. Therefore, the one-way ANOVA test, which is a parametric statistical method, was applied, and post-tests were processed by the Scheffe method. Results: The average size of each RMS in the Normal, Diastema, and Crowding groups was Normal> Crowding> Diastema. However, the standard deviation was in the order of Crowding> Normal> Diastema. The average value of each data is as follows. Diastema model was the smallest ($5.51{\pm}0.55{\mu}m$), followed by the crowding model ($12.30{\pm}2.50{\mu}m$). The normal model showed the maximum error ($13.23{\pm}1.06{\mu}m$). Conclusion: There was a statistically significant difference in the repeatability of the scanning measurements according to the dentition type. Therefore, you should be more careful when scanning the normal intense or crowded dentition than scanning the interdental lining. However, this error value was within the range of applicable errors for all clinical cases.

• 대한심미치과학회지
• /
• 제16권2호
• /
• pp.7-18
• /
• 2007

There is now an increased demand for harmony between the peri-implant gingiva and adjacent dentition. In the event of a pending loss of a single tooth in the aesthetic zone with healthy periodontium, expectation for optimal gingival and prosthodontic aesthetics are often very high. Unfortunately, bone resorption is common following the removal of an anterior tooth, compromising the gingival tissue levels for the eventual implant restoration. Also, improper implant placement and inadequate osseous-gingival support potentially deleterious aesthetic result. The creation of an esthetic implant restoration with gingival architecture that harmonizes with the adjacent dentitionis formidable challenge. The predictability of the peri-implant esthetic outcome may ultimately be determined by the patient's own presenting anatomy rather than the clinician's ability to manage state-of-the-art procedures. To more accurately predict the peri-implant esthetic outcome before removing a failing tooth, a considering of diagnostic keys is essential. This presentation addresses the useful diagnostic keys that affect the predictability of peri-implant gingival aesthetics and the overcoming of the risk factors in anterior single-tooth replacement; it also describes a surgical and prosthodontic technique in achieving a long term successful esthetic outcome. Proper diagnosis and understanding of the biological and periodontal variables of failing dentition and their response to surgical and prosthodontic procedures are the essence of predictability. Using a smart protocol that alters the periodontium toward less risk and more favorable assessment of the diagnostic keys before implant placement will provide the most predictable esthetic outcome. Simple diagnostic keys suggested this presentation are useful method to evaluate the overcoming of the risk factors in anterior single implant restoration.

• 구강회복응용과학지
• /
• 제26권4호
• /
• pp.463-476
• /
• 2010

다수의 구치 상실로 인한 구치부 지지의 부족은 일차적으로 대합치의 정출 및 잔존치의 과도한 교합하중을 발생시킨다. 대합치의 정출은 교합평면의 부조화(reverse curve)와 보철수복공간의 부족을 일으킬 수 있다. 잔존치의 과도한 교합하중 역시 전치의 전방돌출이나, 잔존치의 급속한 마모를 일으켜 적절한 전방유도의 상실 및 교합의 부조화, 보철수복공간의 부족을 일으킬 수 있다. 이러한 환자의 경우, 치과의사는 현재의 교합수직고경이 적절한지의 여부를 판단한 후, 환자가 적응할 수 있는 범위 내에서 기능적, 심미적인 수직고경을 정하고, 반복재현 가능한 하악위에서 적절한 전방유도와 교합평면을 설정해야 한다. 본 증례에서는 구치부 상실 및 대합치의 정출, 그리고 잔존치의 심한 마모로 인하여 교합수직고경 및 교합평면이 붕괴된 환자의 완전구강회복 증례를 문헌 고찰과 함께 보고하고자 한다.