• 대한전자공학회논문지
• /
• 제7권3호
• /
• pp.12-18
• /
• 1970

본 논문에서는 광속에 비해서 대단히 낮은 속도로 운동하고 있는 선형, 등방, 균질 매질내에서 크기가 파장과 동등정도이거나 그 이상인 Circular Loop Antenna의 방사특성을 고찰하였다. 고찰에 있어서 우선 운동매질내에서의 전자파방정식인 Maxwell-Minkowski방정식을 토대로 하여 Circular loop antenna에 해당하는 Vector potential을 유도하고 전자계식을 구하였다. 다음 이와같이 유도된 식들로부터 특정한 파장과 속도에 대한 전자계를 계산하고 field pattern을 도시하였으며 이 pattern과 정지매질에서의 field pattern을 비교 검토하였다. 검토한 결과, 지향성은 loop면에 평행한 속도성분에 한하여 속도방향으로는 축소되고 속도와 반대방향으로는 신장되는 사실이 발견되었으며 이 경향은 속도가 클수록 동진주파수가 높을수톡 크게됨을 알수 있었다.

• 전자공학회논문지A
• /
• 제29A권9호
• /
• pp.8-14
• /
• 1992

The radiation pattern of a rectangular-grid array antenna consisted of rectangular waveguides is represented by multiplication of its element and array factors. Calculated radiation patterns for excitation of TES110T mode inside the waveguides suffer from the blindness at a particular direction on E-plane. Numerical simulations show that the blindness can be removed by inserting dielectric plug inside the waveguides or covering dielectric sheath in front of the waveguides.

• 대한전자공학회논문지TC
• /
• 제47권1호
• /
• pp.77-83
• /
• 2010

여러 가지 기판 두께에서 $5{\times}4$ 핀 배열 패치 안테나와 $5{\times}2$ 핀 배열 패치 안테나의 방사특성을 전산모의한 결과를 비교하였다. $5{\times}2$ 핀 배열 패치 안테나는 $5{\times}4$ 핀 배열 패치 안테나와 비교하면 단위 셀의 개수가 반으로 줄어 사용하는 핀의 개수가 반으로 줄며 패치 폭의 크기도 크게 감소하나 전방방사 이득과 수평방향 방사 억제와 같은 방사특성은 매우 비슷함을 볼 수 있었다.

• 한국군사과학기술학회지
• /
• 제16권6호
• /
• pp.811-818
• /
• 2013

In this paper, we have designed the elliptical dual offset gregorian antenna which can use Ka band earth station antennas in the fixed-satellite service. The structure of antenna is increasing the antenna gain by decreasing blockage areas and decreasing wind effects by shortening height of the antenna. The corrugate horn antenna for this antenna has symmetric radiation patterns and low side lobe levels that can meet ITU-R envelope. The distribution of electric field on a aperture of main reflector is calculated by an ray-tracing method that use the radiation pattern of the feed horn. The final geometric of antena is decided by choosing the distribution that comply with antenna requirement. The FEKO analysed electrical performance of this antenna. The fabricated antenna has 45.0dBi(@30.0GHz)/41.7dBi(@20.2GHz), high efficiency and low side lobe level that meet ITU-R S. 580-6 envelope.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.473-477
• /
• 2003

In this paper, a integrated structure of a two-element microstrip patch antenna with two feeds for GPS/PCS dual-band operation is proposed. The radiating element for PCS operation is a novel broad band low-profile cylindrical monopole top-loaded with a shorted meander patch, which gives linearly polarized conical radiation pattern and size reduction of patch due to meander line. The radiating element for GPS operation is a novel square-ring microstrip patch with truncated corners and slits. which provide circularly polarized broadside radiation patterns and size reduction due to slots. using dielectric substrate in GPS antenna of proposed antenna provide to improve isolation between two feeds and reduce size of patch. The proposed antenna achieves the bandwidth and polarization requirements of GPS and PCS systems.

• Progress in Superconductivity
• /
• 제3권2호
• /
• pp.178-182
• /
• 2002

Superconducting four-element patch array antenna was designed and fabricated using $high-T_{c}$ superconducting (HTS) thin film. The array antenna has single-feed circularly polarization and a resonance frequency of 11.85 GHz fur satellite communication system. To fabricate this antenna $YBa_2$$Cu_3$$O_{7-x}$(YBCO) superconducting thin films were deposited using rf-magnetron sputtering technique. Sequential rotation technique based on radiation elements($0^{\circ}$ , $90^{\circ}$, 1$80^{\circ}$, $270^{\circ}$ phase delay) was utilized to achieve circularly polarization. Simulated and measured results, the analysis on resonant frequency(fr), return loss, and bandwidth are presented. The results show that 10 dB return loss bandwidth of the array antenna is 11.04 GHz~12.59 GHz (13.15%) and 3dB axial ratio bandwidth is 11.42~12.52 GHz (9.2%).).).

• Journal of electromagnetic engineering and science
• /
• 제14권3호
• /
• pp.278-283
• /
• 2014

This paper presents a theoretical approach for a modified turnstile antenna suitable for satellite communication in order to investigate the current distributions of radiators and radiation characteristics with equivalent model analysis. The proposed equivalent model is composed of an ideally horizontal dipole antenna and vertically loaded top-hat radiating elements. The required isoflux pattern with wide beamwidth has been achieved by attaching top-hat elements to the main radiators. In addition to illustrating radiation patterns, electrical performances like current distributions have been analyzed by mathematically manipulating the equations derived from the equivalent horizontal and vertical dipole model.

• 한국전기전자재료학회논문지
• /
• 제17권7호
• /
• pp.770-775
• /
• 2004

Although $High-T_c $superconducting HTS antennas have high efficiency and high gain, narrow bandwidth due to the high Q is the major limitation for application of satellite communication and mobile communication. Defining bandwidth as the frequency range over which standing wave ratio (SWR) is 2:1 or less, HTS antenna bandwidths are typically less than 1 %. Thus considerable effort has been focused on developing HTS antennas for broadband operation. In this work the HTS antenna array, using the bipin antenna which consisted of two triangle-radiation patches, was designed and fabricated using a ${YBa}_2{Cu}_3{O}_7x (YBCO)$ superconducting thin film on a MgO substrate for broadband operation. Also gold antennas with the same dimension as our HTS antennas were fabricated on the MgO substrate for the comparison. Experimental results for both antennas were reported in terms of radiation patterns, return losses, bandwidths and other various characteristics. The center frequency of HTS antennas was 20.28 GHz and the bandwidth obtained was significant 10 %.

• International Journal of Contents
• /
• 제7권4호
• /
• pp.44-49
• /
• 2011

The scattering solutions for multiple rectangular metallic gratings in a perfectly conducting plane excited by the TE and TM delta sources are presented using an overlapping T-block method. A reflectarray composed of rectangular metallic gratings shows fanbeam radiation patterns that are useful for an electromagnetic fence. The scattering characteristics of multiple rectangular gratings were computed in terms of total radiated power and antenna directivity. The design method of a fan-beam reflectarray to obtain high directivity was also compared with superdirective radiation and parabolic reflector phase.

• Journal of electromagnetic engineering and science
• /
• 제19권2호
• /
• pp.115-121
• /
• 2019

This paper presents the effects of the position of the split of a split-ring resonator (SRR) on the performance of a composite broadband printed dipole antenna. The antenna is made of two printed dipole arms enclosed by two rectangular and identically printed SRRs. One dipole arm and the SRR are printed on the top side of the substrate, while the other dipole arm and SRR are printed on the bottom side of the same substrate. By changing the position of the split on the SRR, different antenna characteristic values are obtained, namely, for impedance bandwidth and radiation patterns. The split position is thus a critical parameter in antenna design, because it influences the antenna's major performance immensely. Different split positions and their consequences for antenna performance are demonstrated and discussed. The antenna generates linearly polarized radiations, and it is computationally characterized for broadband characteristics. The optimized compact antenna has overall dimensions of 9.6 mm × 74.4 mm × 0.508 mm (0.06λ × 0.469λ × 0.0032λ at 1.895 GHz) with a measured fractional bandwidth of 60.31% (1.32 to 2.46 GHz for |S₁₁| <-10 dB) and a radiation efficiency of >88%.