• 한국농공학회지
• /
• 제45권2호
• /
• pp.86-95
• /
• 2003

During this study, constant stress ratio tests with previous compression anisotropic stress history are performed on compacted decomposed granite soil sampled at Iksan, Jeonbuk. Yielding points are determined from stress-strain curves. The shape and characteristics of compression anisotropic yield curves is examined. In addition, the measured value of yielding curve and stress-strain behavior is predicted by Yasufuku's anisotropic constitutive model based on non-associated flow rule. The main results are summarized as follows : 1) Shape of yielding curves shows almost ellipse but asymmetry with respect to stress path during previous consolidation stress. 2) Yasufuku's anisotropic constitutive model is suitable in evaluation of yielding curves on anisotropic consolidated decomposed granite soil. 3) The predicted stress-strain curve shows reasonable agreement to measured behaviours.

• Journal of Mechanical Science and Technology
• /
• 제15권10호
• /
• pp.1349-1355
• /
• 2001

As most fractures of ductile materials in metal forming processes occurred due to the results of evolution of internal damage - void nucleation, growth and coalescence. In this paper, an approximate yield criterion for voided (porous) anisotropic ductile materials is developed. The proposed approximate yield function is based on Gurson's yield function in conjunction with the Hosford's non-quadratic anisotropic yield criterion in order to consider the characteristic of anisotropic properties of matrix material. The associated flow rules are presented and the laws governing void growth with strain are derided. Using the proposed model void growth of an anisotropic sheet under biaxial tensile loading and its effect on sheet metal formability are investigated. The yield surface of voided anisotropic sheet and void growth with strain are predicted and compared with the experimental results.

• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.359-370
• /
• 1993

Up to now, most studies are on interface crack problems in isotropic-isotropic dissimilar materials, but it seems to be not so much on anisotropic dissimlar materials. In this study, the stress intensity factors for an interface crack in anisotropic dissimilar materials are analysed using author's proposed extrapolation method by BEM and we have done a parametric study about material properties or shapes of crack affecting to the stress intensity factors. However, as there are not other's comparable numerical results on these anisotropic dissimilar materials to the best of author's knowledge, the reliability of the present results was proved by following two methods. The first is considering the asymptotic characteristic about stress intensity factors for an interface crack in anisotropic materials when the ansiotropic material approachs to the isotropic material. The second is considering the discontinuity of stress intensity factors between of a crack in an identical homogeneous anisotropic material and an interface crack in anisotropic dissimilar materials.

• 소성∙가공
• /
• 제31권6호
• /
• pp.351-364
• /
• 2022

The yield criterion, or called yield function, plays an important role in the study of plastic working of a sheet because it governs the plastic deformation properties of the sheet during plastic forming process. In this paper, we propose a modified version of previous anisotropic yield function (Trans. Mater. Process., 31(4) 2022, pp. 214-228) based on J2 and J3 stress invariants. The proposed anisotropic yield model has the 6th-order of stress components. The modified version of the anisotropic yield function in this study is as follows. f(J₂⁰,J₃⁰) ≡ (J₂⁰)³ + α(J₃⁰)² + β(J₂⁰)^3/2 × (J₃⁰) = k⁶ The proposed anisotropic yield function well explains the anisotropic plastic behavior of various sheets such as aluminum, high strength steel, magnesium alloy sheets etc. by introducing the parameters α and β, and also exhibits both symmetrical and asymmetrical yield surfaces. The parameters included in the proposed model are determined through an optimization algorithm from uniaxial and biaxial experimental data under proportional loading path. In this study, the validity of the proposed anisotropic yield function was verified by comparing the yield surface shape, normalized uniaxial yield stress value, and Lankford's anisotropic coefficient R-value derived with the experimental results. Application for the proposed anisotropic yield function to AA6016-T4 aluminum and DP980 sheets shows symmetrical yielding behavior and to AZ31B magnesium shows asymmetric yielding behavior, it was shown that the yield locus and yielding behavior of various types of sheet materials can be predicted reasonably by using the proposed anisotropic yield function.

• 한국터널지하공간학회 논문집
• /
• 제6권4호
• /
• pp.291-302
• /
• 2004

발파압력이 발파공 주위 암반에 발생시키는 암반손상을 연속체 손상역학과 사용자 부프로그램을 이용한 수치해석을 통하여 분석하였다. 암반의 이방성 특성을 적용한 이방성 발파압력을 산출하였으며, 이를 이용하여 이방성 암반손상을 분석하였다. 또한 등방성 암반손상에 대해서도 분석하였다. 자연 암반이 가지고 있는 초기손상을 함께 고려하여 암반손상을 분석하였다. 등방성 암반손상의 매개변수 분석결과, 발파압력과 탄성계수가 암반손상에 가장 크게 영향을 미쳤다. 또한 이방성 암반손상의 매개변수 분석결과, 발파압력이 이방성 암반손상에 가장 크게 영향을 미쳤으나 탄생계수는 이방성 암반손상에 크게 영향을 미치지 않음을 알 수 있었다. 등방성과 이방성 암반손상을 등방성 암반손상과 비교한 결과, 이방성 암반의 수평방향 암반손상이 약 34% 증가 하였고 수직방향은 12% 감소하는 결과를 얻을 수 있었다. 등방성 암반에 대한 밀장전 조건과 디커플링장전 조건하에 발파로 인한 암반손상을 비교한 결과, 밀장전 조건의 암반손상이 디커플링장전 조건보다 약30배 정도 크게 나타났으며, 밀장전 조건의 발파압력은 디커플링장전 조건보다 10배 이상 큼을 알 수 있었다.

• 지구물리와물리탐사
• /
• 제18권2호
• /
• pp.74-84
• /
• 2015

탄성 거꿀 참반사 보정(elastic reverse-time migration)을 통해 물리적으로 의미가 있는 영상을 얻기 위해서는 탄성 파동방정식(elastic wave equation)을 통해 재구성된 벡터 파동장(reconstructed vector wavefield)으로부터 P파와 S파를 분리하는 파분리 알고리듬이 필요하다. 그리고 이방성을 고려한 탄성 거꿀 참반사 보정으로의 확장을 위해서는 이방성을 고려한 탄성 모델링 알고리듬 뿐만 아니라 이방성을 고려한 파분리가 필요하다. 이방성 탄성매질에서의 파분리는 등방성 탄성매질에서 주로 이용하는 Helmholtz decomposition과는 달리 탄성매질의 수직 속도 및 이방성 계수에 따라 계산된 유사미분필터(pseudo-derivative filter)를 이용한다. 이 필터는 적용에 많은 계산이 필요하기 때문에 이 연구를 통해 많은 양의 병렬계산을 효율적으로 수행할 수 있는 GPU (Graphic Processing Unit)를 이용하여 이방성 파분리를 수행하는 알고리듬을 개발하였다. 또한 GPU를 이용해 파분리를 수행하는 알고리듬을 포함하고 MPI (Message-Passing Interface)를 이용하는 효율성 높은 이방성 탄성 거꿀 참반사 보정 알고리듬을 개발하였다. 개발된 알고리듬의 검증을 위해 Marmousi-II 탄성모델을 기초로 수직 횡등방성(vertically transversely isotropy; VTI) 탄성모델을 구축하여 수치모형 실험을 수행해 다성분 합성탄성파탐사자료를 생성하였다. 이 합성탄성파 자료에 개발된 이방성 탄성 거꿀 참반사 보정 알고리듬을 적용하여 GPU와 MPI를 효과적으로 이용한 계산속도 향상과 이방성 파분리에 의한 영상결과의 정확도 향상을 보여주었다.

• Structural Engineering and Mechanics
• /
• 제7권2호
• /
• pp.147-157
• /
• 1999

An analytical methodology for solving antiplane problem of anisotropic materials is proposed and discussed in detail in this study. The material considered in this study possesses a symmetry plane at z=0. The relationship between the problems of anisotropic materials and the corresponding isotropic problems are established by Ma (1996) on the basis of the general solutions for the shear stresses and displacement in both the polar and Cartesian coordinate systems. This implies that any solution of an anisotropic problem can be obtained by solving a corresponding isotropic problem. In this study some examples and numerical results are presented as an explanation of how the complicated anisotropic problem could be solved by the associated simpler isotropic problem.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제14권2호
• /
• pp.84-90
• /
• 2014

This paper presents the results of three-dimensional face point cloud smoothing based on a modified anisotropic diffusion method. The focus of this research was to obtain a 3D face point cloud with a smooth texture and number of vertices equal to the number of vertices input during the smoothing process. Different from other methods, such as using a template D face model, modified anisotropic diffusion only uses basic concepts of convolution and filtering which do not require a complex process. In this research, we used 6D point cloud face data where the first 3D point cloud contained data pertaining to noisy x-, y-, and z-coordinate information, and the other 3D point cloud contained data regarding the red, green, and blue pixel layers as an input system. We used vertex selection to modify the original anisotropic diffusion. The results show that our method has improved performance relative to the original anisotropic diffusion method.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.209.2-209.2
• /
• 2014

In recent years, researches about hydrophobic and hydrophilic surfaces have been executed however their other effects have not been researched enough. In this paper, the fabrication method of hierarchical structures of micro line array combined with fluorinated wax for anisotropic superomniphobic wettability is presented. We have achieved anisotropic and superomniphobic surface via simple two step methods, which are maskless photolithography and wax deposition. In order to prove how to provide those characteristics, SEM, contact angle measurement tool and X-ray diffraction are used. Fluorinated wax is crystalized self-assembly and it is subordinated on micro line array so that it is able to display anisotropic wettability. Understanding on anisotropic superomniphobic surface and simple fabrication method has been attracted to apply for lots of applications which range from self-cleaning surface, microfluidic chip, to directionally fluid control device, even in oily fluid.

• 대한기계학회논문집A
• /
• 제25권3호
• /
• pp.502-509
• /
• 2001

In this paper, when stress waves are propagated along the reinforced direction of the composite, the characteristic equation of Rayleigh wave is derived. The relationships between velocities of stress waves and Rayleigh wave are studied for anisotropic ratios(E(sub)11/E(sub)12 or E(sub)22/E(sub)11). The increments of anisotropic ratios is made by using known material properties and being constant of basic properties. When the anisotropic ratios are increased, Rayleigh wave velocities to the shear wave velocities are almost equal to 1 with any anisotropic ratios. Rayleigh wave velocities to the longitudinal wave velocities and Shear wave velocities ratio to the longitudinal wave velocities are almost identical each other, they are between 0.12 and 0.21. When the anisotropic ration is very high, that is, E(sub)11/E(sub)22=46.88, Rayleigh wave velocities and the shear wave velocities are almost constant with Poissons ratio, longitudinal wave velocities are very slowly increased with the increments of Poissons ratios. When E(sub)11(elastic modulus of the reinforced direction)and ν(sub)12 are constant, Rayleigh wave velocities and the shear wave velocities are steeply decreased with the increments of anisotropic ratios and the velocities of longitudinal wave are almost constant with them. When E(sub)22(elastic modulus of the normal direction to the fiber) and ν(sub)12 are constant, Rayeigh wave velocities is slowly increased with the increments of anisotropic ratios, the shear wave velocities are almost constant with them, the longitudinal wave velocities are steeply increased with them.