• Title/Summary/Keyword: anion-exchange resin

Search Result 144, Processing Time 0.019 seconds

Adsorption of Selenium in Industrial Wastewater Using Anion Exchange Resin and Activated Carbon (음이온교환수지와 활성탄을 이용한 산업 폐수 중 셀레늄의 흡착)

  • Han, Sang-Uk;Park, Jin-Do;Lee, Hak-Sung
    • Journal of Environmental Science International
    • /
    • v.18 no.12
    • /
    • pp.1411-1416
    • /
    • 2009
  • Several adsorbents were tried to remove the selenium ions from industrial wastewater and the following ascending order of the adsorption performance for the selenium at pH 9 was observed: cation exchange resin < chelate resin < zeolite < brown marine algae < granular activated carbon < anion exchange resin. Initial concentration of selenium(146 mg/L) in industrial wastewater was reduced to 63 mg/L of selenium at pH 9 by neutralization process. The maximum uptake of Se calculated from the Langmuir isotherm with anion exchange resin was 0.091 mmol/g at pH 10 and that with granular activated carbon was 0.083 mmol/g at pH 6. The affinity coefficients of Se ion towards anion exchange resin and granular activated carbon were 3.263 L/mmol at pH 10 and 0.873 L/mmol at pH 6, respectively. The sorption performance of anion exchange resin at the low concentration of Se, namely, was much better than that of granular activated carbon. The Se ions from industrial wastewater throughout neutralization process and two steps of adsorption using anion exchange resin was removed to 97.7%.

An Experimental Study on the Compressive Strength and Chloride ion penetration resistance of Cement Mortar mixing Anion Exchange Resin (음이온교환수지 혼입 시멘트 모르타르의 압축강도 및 염소이온 침투 저항성에 관한 실험적 연구)

  • Jung, Do-Hyun;Lee, Yun-Su;Lee, Han-Seung
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2018.11a
    • /
    • pp.23-24
    • /
    • 2018
  • Reinforced concrete is a building material that is generally used in modern society. Also, reinforced concrete structures in high salinity environments have low durability due to corrosion of reinforcing bars due to infiltrated chlorine ions. Anion exchange resins have an ability to immobilize chlorine ions in the resin while releasing their anions. As a material, it has already been shown that it is possible to fix the chloride ion inside the cementitious material through the cement mortar experiment. The purpose of this study is to confirm the compressive strength of cement mortar using powdered anion exchange resin after powdering an anion exchange resin. In order to confirm the chloride ion fixation ability of the powder anion exchange resin, chlorine ion penetration resistance test was carried out.

  • PDF

Basic Study for Development of Denitrogenation Process by ion Exchange(II) (이온교환법에 의한 탈질소 공정개발의 기초연구(II))

  • 이민규;주창식
    • Journal of Environmental Science International
    • /
    • v.7 no.1
    • /
    • pp.89-95
    • /
    • 1998
  • Ion exchange performance to remove nitrate in water was studied using commercially available strong base anion exchange resin of Cl- type in the batch and continuous column reactors. The performance was tested using the effluent concentration histories for continuous column or equilibrium conquilibrium between resin and solution. Anion exchange resin used in this study was more effective than activated carbon or zeolite for nitrate removal. With large resin amount or low initial concentration, nitrate removal characteristics for a typical gel-type resin was Increased. On considering the relation between the breakthrough capacity and nitrate concentration of the influent, the use of anion exchange resin were suitable for the hi선or order water treatment. The nitrate removal of above 90% could be possible until the effluent of above 650 BV was passed to the column. Thus, the commercially available strong base anion exchange resin of $Cl^-$ type used in thins study could be effectively used as economic material for treatment of the groundwater. The breakthrough curves showed the sequence of resin selectivity as $SO_4^{2-}$ > $NO_3$ > $NO^{2-}$ > $HCO_3^-$. The results of this study could be scaled up and used as a design tool for the water purification system of the real groundwater and surface water treatment processes.

  • PDF

A study on the separation and recovery of uranium (우라늄의 분리 및 회수에 관한 연구)

  • 노기환;김준태
    • Journal of environmental and Sanitary engineering
    • /
    • v.12 no.1
    • /
    • pp.15-23
    • /
    • 1997
  • The anionic exchange resins with the Dowex-1 and Amberlite CG-400 form were transformed into resin of sulfate and acetate acid form, respectively. The uranyl complex ions with SO$_{4}$$^{2-}$ and CH$_{3}$COO$^{-}$ were adsorbed on the anion exchange resion mentioned above, and these complex ions were eluted as mixture eluents of 0.7M HNO$_{3}$ - 0.5M NH$_{4}$NO$_{3}$ by anion exchange chromatography. The optimum adsorption conditions of uranyl anion complex ions adsorbed on the upper of the resin colmun were 1.5-2.0 ml/min of flow rates at pH 2.0 and adsorptive power of uranyl complex ion of sulfuric acid type were nearly consistent with the Caussion normal distribution curve, whereas the elution state of UO$_{2}$(Ac)$_{2}$$^{4-}$ with acetic acid type was departed. The weighing form obtained from resin of sulfuric acid and aceric acid type was U$_{3}$O$_{8}$ whose recovery was 91.7%. The possibility of recovering uranium from the monazite sulfate solution using a strong base anion resin, Amberlite CG-400(sulfate form), was successfully recovered more than 90%.

  • PDF

The Effects of Resin Ratio and Bed Depth on the Performance of Mixed-bed Ion Exchange at Ultralow Solution

  • Yoon, Tae-Kyung;Lee, Gang-Choon;Noh, Byeong-Il
    • Journal of Environmental Science International
    • /
    • v.18 no.6
    • /
    • pp.595-601
    • /
    • 2009
  • The effects of the cation-to-anion resin ratio and bed depth on ion exchange performance of mixed-bed were studied at ultralow solution concentration. Breakthrough curves were experimentally obtained for NaCI solution as functions of resin ratio and bed depth. The bed depth affects the pattern of the sodium breakthrough curve but not the chloride breakthrough curve in beds because of the selectivity difference. Resin selectivity determines the shape of breakthrough curves, Some sodium and chloride breakthrough curves crossed at a point as a function of resin ratio. The lower cation-to-anion resin ratio showed the higher effluent concentration or treated volume of the crossover point regardless of the total resin weight.

EVALUATION OF FERROCYANIDE ANION EXCHANGE RESINS REGARDING THE UPTAKE OF Cs+ IONS AND THEIR REGENERATION

  • Won, Hui-Jun;Moon, Jei-Kwon;Jung, Chong-Hun;Chung, Won-Yang
    • Nuclear Engineering and Technology
    • /
    • v.40 no.6
    • /
    • pp.489-496
    • /
    • 2008
  • Ferrocyanide-anion exchange resin was prepared and the prepared ion exchange resins were tested on the ability to uptake $Cs^+$ ion. The prepared ion exchange resins were resin-KCoFC, resin-KNiFC, and resin-KCuFC. The three tested ion exchange resins showed ion exchange selectivity on the $Cs^+$ ion of the surrogate soil decontamination solution, and resin-KCoFC showed the best $Cs^+$ ion uptake capability among the tested ion exchange resins. The ion exchange behaviors were explained well by the modified Dubinin-Polanyi equation. A regeneration feasibility study of the spent ion exchange resins was also performed by the successive application of hydrogen peroxide and hydrazine. The desorption of the $Cs^+$ ion from the ion exchange resin satisfied the electroneutrality condition in the oxidation step; the desorption of the $Fe^{2+}$ ion in the reduction step could also be reduced by adding the $K^+$ ion.

A Study on Ion Exchange Characteristics with Composition and Concentration of Electrolyte, Ratio of Ion Exchange Resin (전해질 성분 및 농도, 이온교환 수지 비율에 따른 이온교환 특성 연구)

  • Ahn Hyun-Kyoung;Rhee In-Hyoung;Yoon Hyoung-Jun;Jeong Hyun-Jun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.7 no.4
    • /
    • pp.727-732
    • /
    • 2006
  • The object of this study was to investigate the influence of composition and concentration of electrolyte, ratio of cation to anion exchange resin of mixed ion exchange column in the performance of ion exchange. Also this work examined the removal capability of suspended solids by ion exchange resin and the effect of particule on the characteristics of ion exchange. Breakthrough time was extended as the amount of ions and particles present in liquid was decreased. The case of anion, the breakthrough sequence is $Cl^{-}, but the case of cation, the breakthrough sequence is $Na^{+}. As for the ratio of cation to anion exchange resin of 1:2, the breakthrough time was prolonged compared with that of 1:1 and 1:3. For the electrolyte of equal concentration containing suspended solid, breakthrough time was contracted less than 20%. It results in the increase in the removal capacity of cation exchange resin. For the higher ratio of cation exchange resin, suspended solids are shorten the cation's breakthrough time so that the runtime of ion exchange resin tower is increased.

  • PDF

Sequential separation of 90Sr, 241Am, 239,240Pu and 238Pu by radioanalytical techniques (방사능 분석기술을 이용한 90Sr, 239,240Pu, 238Pu, 241Am 축차분리)

  • Lee, Myung Ho;Park, Kyoung Kyun;Kim, Jong-Yun;Park, Yeong Jae;Kim, Won Ho
    • Analytical Science and Technology
    • /
    • v.18 no.6
    • /
    • pp.469-474
    • /
    • 2005
  • This paper presents a quantitative method of sequential separation of $^{90}Sr$, $^{241}Am$ and Pu radionuclides with an anion exchange resin and a Sr-Spec resin. The Pu isotopes were purified with an anion exchange resin. The americium and strontium fractions were separated from the matrix elements with an oxalate co-precipitation method. Americium fraction was separated from the strontium fraction with iron co-precipitation method and purified from lanthanides with anion exchange resin. Strontium-90 was purified from other hindrance elements with the Sr-Spec resin after oxalate co-precipitation. The measurement of Pu and Am isotopes was carried out by an ${\alpha}$-spectrometer. Strontium-90 was measured by a liquid scintillation counter. The radiochemical procedure of $^{90}Sr$, $^{241}Am$ and Pu radionuclides investigated in this study has been validated by application to IAEA-Reference soils.

Removal of Orthophosphate Ions from Aqueous Solutions Using the Anion Exchange Resin in the Form of $Cl^-$ Ion ($Cl^-$ 형태의 음이온 교환 수지를 이용한 오쏘인산 이온의 제거에 관한 연구)

  • Kim, Ki-Chul;Park, Su-Jin;Cha, Ran;Jeong, Tae-Young;Chung, Hyung-Keun
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.34 no.3
    • /
    • pp.162-167
    • /
    • 2012
  • The removal of orthophosphate ions from aqueous solutions by the anion exchange resin in the form of $Cl^-$ ion was investigated to elucidate the ion exchange mechanism which depends on the forms of orhthophoshate ions. In addition, the effects of alkalinity and other common anions were studied. The results showed that the orhthophosphate ions with the oxidation state of 2 and 3 ($HPO{_4}^{2-}$ and $PO{_4}^{3-}$) were effectively removed by the anion exchange resin, whereas the part of the $H_2PO_4{^-}$ ion passed through the ion exchange column. This suggested that the affinity of $H_2PO_4{^-}$ to the ion exchange resin was comparable with that of $Cl^-$ ion. In all cases, the effluent pHs have shown to be much lower than the calculated values, indicating that more $Cl^-$ ions than the orthophosphate equivalents in the influent were eluded. As the alkalinity increases, the decrease in pH was minimized. When the alkalinity was 100 mg/L ($CaCO_3$) or greater, 100 mg/L orthophosphate ions including $H_2PO_4{^-}$ were completely removed. The common anions such as $SO{_4}^{2-}$ and $NO_3{^-}$ were also removed by the anion exchange resin, and thus decreased the ion exchange capacity for the removal of orthophosphate.