• Korean Journal of Organic Agriculture
• /
• v.14 no.1
• /
• pp.55-67
• /
• 2006

A survey of 31 organic farmers were conducted to investigate the actual conditions of organic matter application. The amounts of organic matter application in the fields were higher in order of fruit, vegetable and rice farm. The average was 50 ton/ha in vegetable farms. In the green vegetable farms saw dust and animal manure were mainly utilized to make compost. Rice straw, wood chip, and forest bushes were also used for composting. In the fruit vegetable farms materials relatively lower in nitrogen content such as rice straw and cattle manure were used in vegetative period and materials higher in nitrogen content such as oil cake and wild grass were used in reproductive phase. Nutrient balance investigated in the farm in Icheon region who produce lettuce, angelica, and kale continuously in one cropping year indicated surplus in three major nutrients. Nitrogen and phosphorous were in excess by 29 and 10 kg respectively in the organic rice farm in yang-pyoung region. While soil chemical properties in the organic farms are within the adequate range in open field, it is much higher than the limits in the greenhouse soils. Overall application of organic matter is in an oversupply state. This results suggested that the organic matter management should be based on the soil conditions for sustainable cultivation. Chemical composition of organic matters and soil test reports should be considered prior to the application of organic matter.

• Journal of Life Science
• /
• v.19 no.1
• /
• pp.65-74
• /
• 2009

The objective of this study was to examine the effects of steam flaking treatment of corn grains imported from USA and India on in vitro gas production, microbial growth and contents of aflatoxin $B_1$ and ochratoxin A. Each treatment was composed of total 4 treatments including (1) USCW (US com-whole type), (2) USCF (US corn-flaked type), (3) IDCW (India corn-whole type) and (4) IDCF (India orn-flaked type) with 4 replications $\times$ 6 incubation times (3, 6, 9, 12, 18 and 24 hr). Mycotoxin (aflatoxin $B_1$ & ochratoxin A) contents in test corns tended to increase gradually with increasing logistics periods from the harbor, hopper, silo to processing line. The contents of aflatoxin $B_1$ in India corn (IDCW) and US corn (USCW) were 11.71 and 1.78 ppb, respectively when measured at the hopper. After steam flaking, both contents of aflatoxin $B_1$ in USCW and IDCW were 0.00 ppb. It means that Aspergillus flavus could be decreased by steam flaking. However, this trend was not observed in ochratoxin content. The gas production rate of USA corns (USCW & USCF) was significantly (p<0.05) higher than India corns (IDCW & IDCF), and that of steam flaked corns (USCF & IDCF) was higher $1.5{\sim}2%$ than whole corns (USCW & IDCW) after 3 hr incubation in in vitro experiment. pH value was optimally maintained for microbial growth during whole incubation times with the value of 6.05 to 6.54, and was not significantly different between treatments, but USCF was somewhat lower than other treatments. pH value decreased following 12 hr of incubation but gas production increased rapidly during the same period. In addition, in vitro microbial growth rates also increased with up to 18 hr of incubation period, thereafter experienced a decrease with extended incubation time. In conclusion, US corn was superior to India corn by origin based on the results of in vitro and mycotoxin contents. And steam flaking process of imported corns tended to decrease mycotoxin contents such as aflatoxin $B_1$ and ochratoxin A as well as improve in vitro gas production and microbial growth rates.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2003.07b
• /
• pp.67-88
• /
• 2003

The consumption of poultry meat (chicken and turkey) grew the most during the past few decades due to several contributing factors such as low price. product research and development. favorable meat characteristics, responsive to consumer needs, vertical integration and industry consolidation, new processing equipments and technology, and aggressive marketing. The major processing technologies developed and used in chicken processing include forming/restructuring, tumbling, curing, smoking, massaging, injection, marination, emulsifying, breading, battering, shredding, dicing, and individual quick freezing. These processing technologies were applied to various parts of chicken including whole carcass. Product developments using breast, thigh, and mechanically separated chicken meat greatly increased the utilization of poultry meat. Chicken breast became the symbol of healthy food, which made chicken meat as the most frequent menu items in restaurants. However, the use of and product development for dark meat, which includes thigh, drum, and chicken wings were rather limited due to comparatively high fat content in dark meat. Majority of chicken are currently sold as further processed ready-to-cook or ready-to-eat forms. Major quality issues in chicken meat include pink color problems in uncured cooked breast, lipid oxidation and off-flavor, tenderness PSE breast, and food safety. Research and development to ensure the safety and quality of raw and cooked chicken meat using new processing technologies will be the major issues in the future as they are now. Especially, the application of irradiation in raw and cooked chicken meat products will be increased dramatically within next 5 years. The market share of ready-to-eat cooked meat products will be increased. More portion controlled finished products, dark meat products, and organic and ethnic products with various packaging approaches will also be introduced.

• Journal of Chest Surgery
• /
• v.35 no.3
• /
• pp.171-176
• /
• 2002

Background: Blood-foreign interaction cause activation of coagulation and inflammatory process that may lead to multiorgan dysfunction and determine the surgical outcomes. Of the methods for assessing the biocompatibility, the platelet adhesion study is considered as the most valuable evaluation step in blood-foreign interaction. As the most studies have used in-vitro or ex-vivo conditions, we have developed a technique of quantification for platelet adhesion on the blood contact surface by using in-vivo injection of radioactive platelets. Material and Method: A coupled bypass circuit was designed to connect the proximal and descending thoracic aorta in 6 piglets(20∼25 Kg). One side of the circuit tube was consisted of a heparin coated PVC tube(10mm in ID, n=6, Experimental group), and the other, a non-heparin coated PVC tube(10mm in ID, n=6, Control group). After cannulation, the blood was circulated through the circuit for 2 hours. Platelet concentrate was prepared from homologous pig blood 24 hours before the experiment. The platelet concentrate was incubated with Tc-99m-HMPAO for 30 min and then centrifuged for 10 min. The supernatant was discarded and the radio-labeling efficacy was measured. The radio-labeled platelet concentrate was mixed with the autologous plasma to make the volume 5 ml, and the mixture was injected intravenously into the experimental animal. After 2 hour circulation, 5 pieces of the specimen(10mm in length each) were obtained from each PVC tube. The radioisotopes were counted with a gamma counter(Cobra ll, Packard, USA), and the ratio of radioisotope count was compared between the control and experimental group. Result: The radioisotope count number was 537.3221.1 Ci/min in the control group and 311.1 184.5 Ci/min in the experimental group(p=0.0104). The ratio between the groups was 1 to 0.58 (p=0.004). Conclusion: In vivo quantification using technetium-99m-HMPAO labeled platelets is simple and reproducible in evaluating platelet adhesion on a foreign surface. We suggest this technique to be a useful tool for blood compatibility test.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.3
• /
• pp.85-91
• /
• 1988

A field experiment was conducted to determine the effects of shading degrees (0: full sunlight, 25, 50 and 75%) on the proximate components, cell wall constituents (CWC), digestibility, water soluble carbohydrates (WSC) and nitrate nitrogen ($NO_3$-N) concentration of grasses grown in forest. For the test different artificial shading houses were established and pasture species used were orchardgrass, timothy, perennial ryegrass and ladino clover. The experiment was performed at LES in Suwon. 1985. 1. Considering proximate components, CWC and digestibility of grasses, ladino clover showed the best quality, and then perennial ryegrass. 2. The contents of crude protein, crude ash, and digestibility of grasses were increased with shading, regardless of pasture species. As the shading degrees are increased, the contents of crude fiber in orchardgrass, perennial ryegrass and timothy were decreased, while that in ladino clover was increased with shading. 3. Grasses grown in spring showed higher digestibility than those grown in summer season. 4. The content of WSC was the highest in perennial ryegrass, and then ladino clover, orchardgrass, and timothy, in that order. Also WSC was decreased as the shading degrees are increased. 5.The content of $NO_3$-N was the highest in perennial ryegrass, and then orchardgrass, ladino clover and timothy, in that order. Also the $NO_3$-N was significantly increased with higher shading level. In the regression equation between shading degrees and $NO_3$-N ($r^2$=0.90**, TEX>$r^2$=0.95**), shading degree of 43 to 44% was critical level, causing nitrate poisoning to animal. 6 Considering grass quality, dry matter yield and $NO_3$-N, less than 40% of shading degree (over 60% of full sunlight) was desirable for better grassland improvement, management and utilization in the forest.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.3
• /
• pp.280-286
• /
• 1999

This studies were conducted to evaluate efficiency of microbial inoculator for active composting of food wastes. The Microbial inoculators used in this studies were purchased from different comparise to evaluate their effectiveness for composting of food waste in Korea. The number of bacteria growing at $30^{\circ}C$ in commercial inoculator collected were below $91.0{\times}10^8\;CFU/g$ which were counted from well cured compost made by animal manure. The number of bacteria in commercial microbial inoculator, such as FL, VP, B9, CM and GE were higher than that of composted at $50^{\circ}C$ or $60^{\circ}C$ of incubation temperature. Fungi were counted in GR, VP and B9 as over $10^3CFU/g$ at $30^{\circ}C$ of incubation temperature, while fungi of all the commercial inoculator collected could not grown at $50^{\circ}C$ and $60^{\circ}C$. Actinomycetes in most of the these had higher number($10^5CFU/g$) than that of compost : however, it was not detected at $60^{\circ}C$ incubation temperature from all the samples collected. The amount of carbon dioxid production was order to VP>HU>B9>GE>CM>Control>Compost in the lab scale composting test with or without inoculation of commercial inoculators, however, but the difference in carbon dioxide production was similar among each treatments. The effect of inoculation on composting parmeter such as pH changes, temperature increasing and change of chemicals properties were a little among each treatments, with or without inoculation of commercial inoculator in active composting of food waste. Using commercial inoculator did not show any statistical difference in food waste composting process under various condition such as pH changes, temperature changes, etc.

• Journal of Life Science
• /
• v.27 no.11
• /
• pp.1331-1339
• /
• 2017

DNA barcoding is the identification of a species based on the DNA sequence of a fragment of the cytochrome C oxidase subunit I (COI) gene in the mitochondrial genome. It is widely applied to assist with the sustainable development of fishery-product resources and the protection of fish biodiversity. This study attempted to verify horse-head fish (Branchiostegus japonicus) and fake horse-head fish (Branchiostegus albus) species, which are commonly consumed in Korea. For the validation of the two species, a real-time PCR method was developed based on the species' mitochondrial DNA genome. Inter-species variations in mitochondrial DNA were observed in a bioinformatics analysis of the mitochondrial genomic DNA sequences of the two species. Some highly conserved regions and a few other regions were identified in the mitochondrial COI of the species. In order to test whether variations in the sequences were definitive, primers that targeted the varied regions of COI were designed and applied to amplify the DNA using the real-time PCR system. Threshold-cycle (Ct) range results confirmed that the Ct ranges of the real-time PCR were identical to the expected species of origin. Efficiency, specificity and cross-reactivity assays showed statistically significant differences between the average Ct of B. japonicus DNA ($21.85{\pm}3.599$) and the average Ct of B. albus DNA ($33.49{\pm}1.183$) for confirming B. japonicus. The assays also showed statistically significant differences between the average Ct of B. albus DNA ($22.49{\pm}0.908$) and the average Ct of B. japonicus DNA ($33.93{\pm}0.479$) for confirming B. albus. The methodology was validated by using ten commercial samples. The genomic DNA-based molecular technique that used the real-time PCR was a reliable method for the taxonomic classification of animal tissues.

• Journal of Periodontal and Implant Science
• /
• v.31 no.4
• /
• pp.833-846
• /
• 2001

Recently, use of natural medicine is getting more attention, and some of them are believed to be effective in　the treatment of periodontitis. Among them, the seeds of safflower(Carthamus tinctrorius L.) have been proven to be effective through its use in bone diseases such as fracture and osteoporosis. During the last few years, studies using the seeds of safflower gown in Korea have been active, and it has been reported that safflower seed extract increase the proliferation and the alkaline phosphatase(ALP) activity of human periodontal ligament fibroblast(hPDLF), osteoblast, and that they promote the mineralization process. In animal studies, when safflower seed extract were administered orally new bone formation was promoted. Recently, in an effort to find out the most effective osteogenic components, among many components of the safflower seed, various safflower seed fraction extracts were obtained by multistep extraction of the safflower components using various solvents. Among these, saf-M-W fraction extracted by methanol and water was most effective in increasing osteogenic potential of osteoblasts. In this study, the effect of safflower seed fraction extract, saf-M-W, on the growth and differentiation of hPDLF and MC3T3-E1 cell was investigated. The toxicity of saf-M-W on both cells was measured using M'IT(3-(4,5dimethylthiazol-2-y1)-2,5-diphenyl tetrazolium bromide) test, and ALP activity was measured using the colorimetric assay of hPDLF. In addition, in MC3T3-El cells, the expression of ALP, bone sialoprotein(BSP) mRNA was observed using Northern blot, and the mineralized nodule formation Was observed using von Kossa stain and phase-contrast microscope. 1. In concentrations below $10{\mu}g/ml$, saf-M-W didn't show any toxicity on hPDLF and MC3T3-El cell. 2. The change in saf-M-W concentration had no effect on the ALP activity of hPDLF. 3. In MC3T-E1 cells, mRNA expressions of ALP and BSP were greater in the experimental group treated with $10{\mu}g/ml$ concentration of saf-M-W compared with the control group. 4. In MC3T3-El cells, abundance of mineralized nodules were formed in the experimental group treated with $10{\mu}g/ml$ Concentration of saf-M-W, while no mineralized nodule was formed in the control group. These results suggest that safflower seed fraction extract, saf-M-W. didn't show any toxicity on hPDLF and MC3T3-E1 cell at concentrations below $10{\mu}g/ml$ and effectively enhanced the differentiation and osteogenic potential of MC3T3-El cell.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.1
• /
• pp.23-29
• /
• 2018

'Dakyeong' (Avena sativa L.), a winter oats for forage use, was developed by the breeding team at National Institute of Crop Science, RDA in 2016. It was derived from a cross between 'CI7505'(IT133304) and 'Swan'(IT197920). Subsequent generations followed by the cross were handled in bulk and pedigree selection programs at Iksan and Jeonju, respectively. After preliminary and advanced yield test for 2 years, 'SO2004009-B-B-10-8-3-9', designated as a line name of 'Gwiri91', were subsequently evaluated for earliness and forage yield during 3 years in four parts such as Jeju (upland), Yesan (upland), Iksan (upland), and Jeonju (paddy), from 2014 to 2016, and finally named as 'Dakyeong'. Cultivar 'Dakyong' has leaves of dark green color, thick diameter culm and long grain of brown color. Over 3 years, the heading date of 'Dakyeong' was about 5 days earlier than that of check cultivar 'Samhan' (April 30 and May 5, respectively), and their average forage dry matter yield harvested at milk-ripe stage was higher 12% ($15.7tone\;ha^{-1}$) than $14.0tone\;ha^{-1}$ of check cultivar. Cultivar 'Dakyeong' was lower than the check cultivar 'Samhan' in terms of the protein content (6.1% and 7.0%, respectively) and total digestible nutrients (62.1%, and 62.5%, respectively), while the TDN yield was more than the check ($7.79tone\;ha^{-1}$ and $7.64tone\;ha^{-1}$, respectively). Fall sowing cropping of 'Dakyeong' is recommended only in areas where average daily minimum mean temperatures in January are higher than $-6^{\circ}C$, and it should not be cultivated in mountain areas, where frost damage is likely to occur.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.1
• /
• pp.16-22
• /
• 2018

Oats (Avena sativa L.), which are known as one of the forage crops of Korea, have good livestock palatability and are popular to cattle farmers because of their high dry matter. However, the cultivation of double cropping in the rice field was reluctant due to the late maturing for farmers to plant rice continuously. 'Hi-early', a winter oats for forage use, was developed by the breeding team at National Institute of Crop Science, RDA in 2016. It was derived from a cross between '517A2-121'(IT133383) and 'CI7604' (IT133379). Subsequent generations followed by the cross were handled in bulk and pedigree selection programs at Suwon, Iksan and Jeonju, respectively. After preliminary and advance yield test for 2 years, 'SO2004015-B-B-23-1-3-7', designated as a line name of 'Gwiri92', were subsequently evaluated for earliness and forage yield during 3 years in four parts such as Jeju (upland), Yesan (upland), Iksan (upland), and Jeonju (paddy), from 2014 to 2016, and finally named as 'Hi-early'. Cultivar 'Hi-early' has the characteristics of medium leaves of green color, thick diameter culm, and medium grain of brown color. Over 3 years, the heading date of 'Hi-early' was about 9 days earlier than that of check cultivar 'Samhan' (April 26 and May 5, respectively). Average forage fresh yield of 'Hi-early' harvested at milk-ripe stage was similar to check cultivar ($40.2tone\;ha^{-1}$ and 40.0 tone ha-1, respectively), and dry matter yield also was similar to check cultivar (14.2 tone ha-1 and $14.0tone\;ha^{-1}$, respectively). Cultivar 'Hi-early' was lower than the check cultivar 'Samhan' in terms of the protein content (6.2% and 7.0%, respectively) and total digestible nutrients (61.0%, and 62.5%, respectively), while the TDN yield was more than the check ($7.91tone\;ha^{-1}$ and $7.64tone\;ha^{-1}$, respectively). Fall sowing cropping of 'Hi-early' is recommended only in areas where average daily minimum mean temperatures in January are higher than $-6^{\circ}C$, and it should not be cultivated in mountain areas, where frost damage is likely to occur.