• Clinical and Experimental Reproductive Medicine
• /
• v.38 no.3
• /
• pp.142-147
• /
• 2011

Objective: This study was performed to evaluate testicular sperm chromatin condensation using aniline blue-eosin (AB-E) staining and its effects on IVF-ET. Methods: Chromatin condensation was analyzed using AB-E staining in 27 cases of testicular sperm extraction. There were 19 cases of obstructive azoospermia (OA) and 8 cases of non-obstructive azoospermia (NOA) in IVF-ET. Mature sperm heads were stained red-pink whereas immature sperm heads were stained dark blue. The percentage of sperm chromatin condensation was calculated from the ratio of the number of red-pink sperm to the total number of sperm analyzed. Results: The overall percentages of chromatin condensation in OA and NOA were $31.1{\pm}11.2%$ and $26.3{\pm}14.4%$, respectively. The fertilization rate was significant higher in OA than NOA ($p$ <0.05); however, the rates of good embryos and clinical pregnancy did not show statistical differences. In OA and NOA, statistical differences were not observed in the rate of chromatin condensation, fertilization, good embryos, and clinical pregnancy between the pregnant group and non-pregnant group. Conclusion: Chromatin condensation is less stable than OA and showed a low fertilization rate in NOA. While there were no significant differences in chromatin condensation results between NOA and OA, we propose that a pattern of decreased chromatin condensation in NOA is one of the factors of low fertilization results requiring further study.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.30-30
• /
• 2003

• Korean Journal of Metals and Materials
• /
• v.56 no.12
• /
• pp.900-909
• /
• 2018

A $ZnO/TiO_2$ photocatalyst decorated with PbS quantum dots (QDs) was synthesized to achieve high photocatalytic efficiency for the decomposition of dye in aqueous media. A $TiO_2$ porous layer, as a precursor photocatalyst, was fabricated using micro-arc oxidation, and exhibited irregular porous cells with anatase and rutile crystalline structures. Then, a ZnO-deposited $TiO_2$ catalyst was fabricated using a zinc acetate solution, and PbS QDs were uniformly deposited on the surface of the $ZnO/TiO_2$ photocatalyst using the successive ionic layer adsorption and reaction (SILAR) technique. For the PbS $QDs/ZnO/TiO_2$ photocatalyst, ZnO and PbS nanoparticles are uniformly precipitated on the $TiO_2$ surface. However, the diameters of the PbS particles were very fine, and their shape and distribution were relatively more homogeneous compared to the ZnO particles on the $TiO_2$ surface. The PbS QDs on the $TiO_2$ surface can induce changes in band gap energy due to the quantum confinement effect. The effective band gap of the PbS QDs was calculated to be 1.43 eV. To evaluate their photocatalytic properties, Aniline blue decomposition tests were performed. The presence of ZnO and PbS nanoparticles on the $TiO_2$ catalysts enhanced photoactivity by improving the absorption of visible light. The PbS $QDs/ZnO/TiO_2$ heterojunction photocatalyst showed a higher Aniline blue decomposition rate and photocatalytic activity, due to the quantum size effect of the PbS nanoparticles, and the more efficient transport of charge carriers.

• Journal of Powder Materials
• /
• v.11 no.2
• /
• pp.143-148
• /
• 2004

In the present study, $TiO_2$ imbedded composite powders have been successfully prepared from the (Cu. Zn)/$TiO_2$ composite salt solution. The composite (Cu, Zn)/$TiO_2$ powders were formed by drying the solution at 200~$600^{\circ}C$ in the hydrogen atmosphere. Photocatalytic characteristics was evaluated by detecting the decomposition ratio of aniline blue with UV-visible spectrophotometer(Shimazu Co., UV-1601). Phase analysis of (Cu, Zn)/$TiO_2$ composite powders was carried out by XRD and DSC, and powder size was measured with TEM. The mean particle size of composite powders was about 100mm. As the reduction temperature increases, a few zinc sulfide and oxide phases was formed and copper oxide phase was reduced. The decomposition ratio of aniline blue was about 80％ under the UV irradiation by the TiO$_2$ phase in the composite (Cu, Zn)/$TiO_2$ powders and similar decomposition ratio of 80％ was obtained at the UV lightless condition by virtue of Cu and Zn compounds.

• Microbiology and Biotechnology Letters
• /
• v.18 no.1
• /
• pp.71-75
• /
• 1990

Yoghurt was prepared with Bifidobacterium longum TK-100 and Lactobacillus acidophilus TK-2070. The prepared yoghurt showed the increase of the titratable acidity under cold storage condition. This was derived from the active L. acidophilus TK-2070 on the logarithmic phase rather than from the B. longumn TK-2070. B. longum TK-100 grew well in the facultative anaerobic condition as well as in the strict anaerobic condition. Reinforced clostridial agar medium with 0.1% aniline blue was tried for the differential viable cell counts in the mixed culture and in the yoghurt. B. longurn TK-2070 had the light gray, blue-dotted colonies of about 2 mm diameter. L. acidophilus TK-2070 had the light gray colonies of about 1 mm diameter.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.8 no.1
• /
• pp.1-6
• /
• 2010

Methylene blue is a very effective reducer of drug-induced methemoglobinemia. It has dose-dependent oxidation or reduction properties. In most cases, a dose of 1 to 2 mg/kg IV given over 5 minutes and immediately followed by a 15- to 30-mL fluid flush to minimize the local pain is both effective and relatively safe. The onset of action is quite rapid, and the effects are usually seen within 30 minutes. The dose may be repeated after 30 to 60 minutes and then every 2 to 4 hours as needed. The total dose should not exceed 7 mg/kg as a single dose or 15 mg/kg within 24 hours. Repeated treatment may be needed for treating compounds that have prolonged elimination or those compounds that undergo enterohepatic recirculation (e.g., dapsone). Methylene blue can cause dose-related toxicity. At high doses, methylene blue can also induce an acute hemolytic anemia and rebound methemoglobinemia. The reasons for treatment failure with methylene blue include ineffective GI decontamination, the existence of other forms of hemoglobin (e.g., sulfhemoglobin), a low or high dose of methylene blue and the toxicokinetics of some agents, such as aniline, benzocaine or dapsone.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.473-474
• /
• 2005

Blue-emitting polymers containing carbazole units In main chains were synthesized by palladium catalyzed polycondensation of aniline with dibromo-substituted monomers such as 3,6-dibromocarbazole, N-(2-ethylhexyl)-3,6-dibromocarbazole, and bis[6-bromo-N-(2-ethylhexyl)-carbazole-3-yl], respectively. All synthesized polymers exhibited relatively good solubility in common organic solvents, considerable molecular weights and high resistance to thermal degradation. From UV-Vis absorption and photoluminescence (PL) spectra of these solution-processable polymers, $\lambda_{max,UV}$ were in the range of 290 ~ 340 nm and $\lambda_{max,PL}$ were in the blue emission range of 440 ~ 478 nm, The polymers had HOMO energy (-5.19 ~ -5.64 eV) and wide band gap energy (2,91 - 3.42 eV).

• Analytical Science and Technology
• /
• v.14 no.1
• /
• pp.15-20
• /
• 2001

Photocatalytic $TiO_2$ films were prepared by anodic oxidation at 180 V and their structural difference caused by oxidation conditions was studies. The microstructure of $TiO_2$ films in $H_2SO_4$ and $H_2SO_4/H_2O_2$ solution was mixed type of rutile and anatase. However, the $TiO_2$ layer formed in $H_2SO_4/H_3PO_4$ and $H_2SO_4/H_3PO_4/H_2O_2$ mixture was mostly anatase type. All $TiO_2$ films prepared by anodic oxidation exhibited photocatalytic properties. The photocatalytic degradation of aniline blue was first order reaction with similar rate constants at all oxidative conditions examined in this work.

• Korean Journal of Materials Research
• /
• v.11 no.1
• /
• pp.61-66
• /
• 2001

$TiO_2$films for photocatalytic reaction were synthesized by anodizing process. The photocatalytic efficiencies of anodized $TiO_2$were evaluated by the rate of decomposition of aniline blue. The properties of photocatalysis on anodic $TiO_2$films have been observed, but the efficiencies of photocatalytic reaction depended on the conditions of films formation. The microstructure of the anodic film formed in $H_2SO_4$ solution differed from that of $TiO_2$films formed in $H_2SO_4+H_3PO_4$ solution. It has been shown that the appropriate applied-voltage for anodizing of titanium for photocatalysis was 180V in both aqueous solutions.

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.934-938
• /
• 1999

Effect of processing agents on physical properties on aniline-type leathers such as wet blue, crust leather, and finished leather has been investigated. These leathers were manufactured from pelts obtained by the chemical, the enzyme, and the bio-tech treatment. There was no difference in physical properties between crust leather and finished leather. All finished leathers with the three treatments were satisfied with the Korean Industrial Standard like a tensile strength of $1.2kg_f/mm^2$, an elongation of 30%, a tear strength of $3.0kg_f/mm$, a grain crack weight of $15kg_f$, and a $Cr_2O_3$ content of 2.5%. In peculiar, application of the bio-tech treatment gave the best leather. This improvement of physical quality could be explained by the results of SEM and image analyser.