• 전자공학회논문지SC
• /
• 제49권1호
• /
• pp.74-79
• /
• 2012

위상배열레이더를 이용한 추적의 성능을 지수화하기 위해서 각도예측 오차공분산행렬의 함수를 이용한 정량화 방법에 대해 검토하였다. 특히, 이 오차공분산행렬의 함수로 최대고유값과 대각합을 이용하여 정량화하는 경우에 대해 안테나 빔조향 손실을 반영한 표적탐지확률을 기준으로 정량화의 일관성을 수치실험을 통해 검토하였다. 이를 통해 추적성능을 표적탐지확률로 기준하는 경우, 대각합이 최대고유값 보다 더 일관성을 갖는 정량화 함수임을 확인하였다.

• Journal of electromagnetic engineering and science
• /
• 제18권4호
• /
• pp.231-241
• /
• 2018

In this paper, we consider the anti-attack procedure of a ballistic missile defense system (BMDS) at different operating frequencies at its phased-array radar station. The interception performance is measured in terms of lateral divert (LD), which denotes the minimum acceleration amount available in an interceptor to compensate for prediction error for a successful intercept. Dependence of the frequency on estimation accuracy that leads directly to prediction error is taken into account, in terms of angular measurement noises. The estimation extraction is performed by means of an extended Kalman filter (EKF), considering two typical re-entry trajectories of a non-maneuvering ballistic missile (BM). The simulation results show better performance at higher frequency for both tracking and intercepting aspects.

• 한국정밀공학회지
• /
• 제19권6호
• /
• pp.77-85
• /
• 2002

An analysis method which calculates corrective machining information for improving the motion accuracy of linear motion guide Is proposed in this paper. The method is composed of two algorithms. One is the algorithm fur prediction of the motion errors from rail form error. The other is the algorithm for prediction of rail form error from the motion errors of table. Transfer function is utilized in each algorithm, which represents the ratio of bearing reaction force variation to unit magnitude of spatial frequencies of raid from error. As the corrective machining information is acquired from the measured motion errors of table, the method has a merit not to measure rail form error directly. Validity of the method is verified both theoretically and experimentally. By applying the method, linear motion error of test equipment is reduced from 5.97$\mu$m to 0.58$\mu$m, and reduced from 32.78arcsec to 6.21 arcsec in case of angular motion error. From the results, it is confirmed that the method is very effective to improve the motion accuracy of linear motion guide.

• 대한전자공학회논문지TC
• /
• 제41권10호
• /
• pp.27-33
• /
• 2004

본 논문에서는 극성 결정 반송파 복원 알고리즘을 이용하여 고차 QAM에서 효율적으로 위상 및 주파수 오차를 보정하는 회로를 제안하였다. 제안된 회로는 전체적으로 디지털 동작을 하며 위상오차와 주파수 오차를 동시에 보정한다. 제안된 방법은 성상도상에서 회전하는 심볼의 각 속도에서 주파수 오차를 찾아내 역회전 시킨다. 제안된 회로는 입력된 신호의 구간평균을 취하여 가산성 백색 잡음 채널 환경 하에 효율적으로 대처하는 구조를 가지며 I와 Q축 하나의 정보만으로 위상 정보를 추정하여 하드웨어를 간소화 하였다. 회로설계 검증결과 ±35도의 위상오차와 0.25의 일반화된 주파수오차에서 보정을 하는 성능을 보였으며 15dB의 AWGN 환경 하에서도 높은 수렴 성능을 나타내었다.

• 한국생산제조학회지
• /
• 제22권1호
• /
• pp.107-111
• /
• 2013

The gyroscopes have been used as a suitable inertial instrument for the navigation guidance and attitude controls. The accuracy as very sensitive sensor is limited by the lock-in region (dead band) due to the frequency coupling between two counter-propagating waves at low rotation rates. This frequency coupling gives no phase difference, and an angular increment is not detected. This problem can be overcome by mechanically dithering the gyroscope. This paper presents the design method of mechanical dither by the theoretical considerations and the verification of the theoretical equations through FEM applications. As a result, comparing to the past result, the maximum prediction error of resonant frequency was within 3 percent and peak dither rate was within 5 percent. It was found that the theoretical equations can be feasible for the mechanical performance of dither.

• 한국산학기술학회논문지
• /
• 제11권6호
• /
• pp.1949-1954
• /
• 2010

자이로스콥은 네비게이션을 가이드하거나 특성을 제어하는데 적절한 관성 측정도구로 사용되었다. 매우 민감 한 센서로서의 정확성은 저회전율 역전파 사이의 진동수 커플링으로 인한 폐쇄영역(데드 밴드)으로 결정된다. 이 진동 커플링은 위상차가 없으며, 각증분 값은 검출되지 않는다. 이 문제는 자이로스콥의 기계적인 진동으로 해결될 수 있다. 본 논문은 FEM을 통해 이론적 식들의 이론적 고려사항과 증명의 방법으로 기계 진동의 설계방법을 제시한 것 이다. 결과적으로, 공명 진동수와 최대 진동률의 최대 예측 오차는 5 %이하였다. 진동의 기계적 성능을 위한 이론식 들은 타당하다고 할 수 있다.

• 제어로봇시스템학회논문지
• /
• 제18권6호
• /
• pp.608-611
• /
• 2012

This paper focuses on attitude stabilization performance improvement of the quadrotor flying robot. First, the dynamic model of quadrotor flying robot was estimated through PEM (Prediction Error Method) using experimental input/output data. And attitude stabilization performance was improved by increasing the generation frequency of PWM signal from 50 Hz to 500 Hz. Also, the controller is implemented using a standard PID (Proportional-Integral-Derivative) controller augmented with feedback on angular acceleration, allowed the gains to be significantly increased, yielding higher bandwidth. Improved attitude stabilization performance is verified by experiment.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.541-547
• /
• 1992

The phased array antenna has the ability to perform adaptive sampling by directing the radar beam without inertia in any direction. The adaptive sampling capability of the phased array antenna allows each sampling time interval to be varied for each target, depending on the acceleration of each target at any time. In this paper we design a three-dimensional adaptive tracking algorithm for the phased array radar system with a given set of measurement parameters. The tracking algorithm avoids taking unnecessarily frequent samples, while keeping the angular prediction error within a fraction of antenna beamwidth so that the probability of detection will not be degraded during a track update illuminations. In our algorithm, the target model and the sampling rate are selected depending on the target range and the target maneuver status which is determined by a maneuver detector. A detailed simulation is conducted to test the validity of our tracking algorithm for encounter geometries under various conditions of maneuver.

• 전자공학회논문지B
• /
• 제30B권5호
• /
• pp.62-72
• /
• 1993

The phased array antenna has the ability to perform adaptive sampling by directing the radar beam without inertia in any direction. The adaptive sampling capability of the phased array antenna allows each sampling time interval to be varied for each target, depending on the acceleration of each target at any time. In this paper we design a three dimensional adaptive target tracking algorithm for the phased array radar system with a given set of measurement parameters. The tracking algorithm avoids taking unnecessarily frequent samples, while keeping the angular prediction error within a fraction of antenna beamwidth so that the probability of detection will not be degraded during a track updata illuminations. In our algorithm, the target model and the sampling rate are selected depending on the target range and the target maneuver status which is determined by a maneuver level detector. A detailed simulation is conducted to test the validity of our tracking algorithm for target trajectories under various conditions of maneuver.

• Imaging Science in Dentistry
• /
• 제52권3호
• /
• pp.239-244
• /
• 2022

Purpose: Despite the proliferation of numerous morphometric and anthropometric methods for sex identification based on linear, angular, and regional measurements of various parts of the body, these methods are subject to error due to the observer's knowledge and expertise. This study aimed to explore the possibility of automated sex determination using convolutional neural networks(CNNs) based on lateral cephalometric radiographs. Materials and Methods: Lateral cephalometric radiographs of 1,476 Iranian subjects (794 women and 682 men) from 18 to 49 years of age were included. Lateral cephalometric radiographs were considered as a network input and output layer including 2 classes(male and female). Eighty percent of the data was used as a training set and the rest as a test set. Hyperparameter tuning of each network was done after preprocessing and data augmentation steps. The predictive performance of different architectures (DenseNet, ResNet, and VGG) was evaluated based on their accuracy in test sets. Results: The CNN based on the DenseNet121 architecture, with an overall accuracy of 90%, had the best predictive power in sex determination. The prediction accuracy of this model was almost equal for men and women. Furthermore, with all architectures, the use of transfer learning improved predictive performance. Conclusion: The results confirmed that a CNN could predict a person's sex with high accuracy. This prediction was independent of human bias because feature extraction was done automatically. However, for more accurate sex determination on a wider scale, further studies with larger sample sizes are desirable.