• 천문학논총
• /
• 제19권1호
• /
• pp.1-10
• /
• 2004

On the framework of a linearly perturbed Friedmann-Robertson-Walker spacetime, we derive an expression for the cosmological angular diameter distance affected by scalar and tensor perturbations. Our expression is applicable in linear order to distances in general FRW models. We study the effect of a stocastic gravitaional wave background on the two-point correlation function of the angular diameter distance fluctuations and, on the basis of this we also derive an expression for the power spectrum of the angular diameter distance fluctuations.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.3-8
• /
• 1997

This parer was presented for the experimental results of torsional vibrations of the horizontal rotating shaft with three disks. The torsional vibrations meter used is a laser system for non-contact measurement of torsional angular vibration velocity and torsional angular vibration displacement. The distance between the disks war changed; the one that had 76mm of disk distance war called basic model, and another that had 106mm of disk distance wide model, and other that had 46mm of disk distance narrow model. In each model, outer diameter of disk was 40mm. And 45mm, or 50mm was also used to extend the effective range of frequencies. The angula vibration displacement and the angular vibration velocity in its torsional vibration were measured to obtain the stable and the unstable regions.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.210-213
• /
• 1998

A kinematically admissible velocity field is developed for the analysis of twisting of extruded products. The twisting of extruded product is caused by the linearly increased rotational velocity from the center on the cross-section of the workpiece at the die exit. In the analysis, the rotational velocity in angular direction is assumed by the multiplication of radial distance and angular velocity. The angular velocity is zero at the die entrance and is increased linearly by axial distance from die entrance. The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product increase with the die twisting angle and the aspect ratio of product and friction condition and reduction area and show that angular velocity increases with the decreases in die length.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.130-135
• /
• 1997

A kinematically admissible velocity field is developed for the analysis of twisting of extruded products. The twisting of extruded product is caused by the linearly increased rotational velocity from the center on the cross-section of the workpiece at the die exit. In the analysis, the rotational velocity in angular direction is assumed by the multiplication of radial distance and angular velocity. The angular velocity is zero at the die entrance and is increased linearly by longitudinal distance from die entrance. The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product changes with the aspect ratio of product and increases with the decreases in die length and in eccentricity of gravity center of the cross-section of workpiece at die entrance from that of the cross-section at the die exit.

• 소성∙가공
• /
• 제8권2호
• /
• pp.143-151
• /
• 1999

The twisting and extrusion process of the product with trapezoidal helical fin from the round billet is developed by the upper bound analysis. The twisting of extruded product is caused by the twisted die surface connecting the die entrance section and the die exit section linearly. In the analysis, the rotational velocity in angular direction is assumed by the multiplication of radial distance and angular velocity. The angular velocity is increased linearly by axial distance from the die entrance. The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product increases with the die twisting angle, the reduction of area, and decreases with the die length, the friction condition.

• 대한인간공학회지
• /
• 제31권5호
• /
• pp.647-655
• /
• 2012

Objective: The purpose of this study was to confirm difference between angular foot movement time and existing foot Fitts' law predicting times, and to develop the angular foot Fitts' law in the foot tapping task. Background: Existing studies of foot Fitts' law focused on horizontal movement to predict the movement time. However, when driving a car, humans move their foot from the accelerator to the brake with a fixed heel. Therefore, we examined the experiment to measure angular foot movement time in reciprocal foot tapping task and compared to conventional foot Fitts' law predicting time. And, we developed the angular foot Fitts' law. Method: In this study, we compared the angular foot movement time in foot tapping task and the predicted time of four conventional linear foot Fitts' law models - Drury's foot Fitts' law, Drury's ballistic, Hoffmann's ballistic, Hoffmann's visually-controlled. 11 subjects participated in this experiment to get a movement time and three target degrees of 20, 40, and 60 were used. And, conventional models were calculated for the prediction time. To analyze the movement time, linear and arc distance between targets were used for variables of model. Finally, the angular foot Fitts' law was developed from experimental data. Results: The average movement times for each experiment were 412.2ms, 474.9ms, and 526.6ms for the 89mm, 172mm, and 253mm linear distance conditions. The results also showed significant differences in performance time between different angle level. However, all of conventional linear foot Fitts' laws ranged 135.6ms to 401.2ms. On the other hand, the angular foot Fitts' law predicted the angular movement time well. Conclusion: Conventional linear foot Fitts' laws were underestimated and have a limitation to predict the foot movement time in the real task related angular foot movement. Application: This study is useful when considering the human behavior of angular foot movement such as driving or foot input device.

• Kyungpook Mathematical Journal
• /
• 제57권4호
• /
• pp.623-630
• /
• 2017

For any nonzero elements x, y in a normed space X, the angular and skew-angular distance is respectively defined by ${\alpha}[x,y]={\parallel}{\frac{x}{{\parallel}x{\parallel}}}-{\frac{y}{{\parallel}y{\parallel}}}{\parallel}$ and ${\beta}[x,y]={\parallel}{\frac{x}{{\parallel}y{\parallel}}}-{\frac{y}{{\parallel}x{\parallel}}}{\parallel}$. Also inequality ${\alpha}{\leq}{\beta}$ characterizes inner product spaces. Operator version of ${\alpha}$ has been studied by $ Pe{\check{c}}ari{\acute{c}}$, $ Raji{\acute{c}}$, and Saito, Tominaga, and Zou et al. In this paper, we study the operator version of ${\beta}$ by using Douglas' lemma. We also prove that the operator version of inequality ${\alpha}{\leq}{\beta}$ holds for commutating normal operators. Some examples are presented to show essentiality of these conditions.

• 한국음향학회지
• /
• 제26권4호
• /
• pp.166-172
• /
• 2007

본 논문에서는 표적 위치추정기법 및 관측잡음에 따른 다중상태 소나의 표적위치 추정성능에 대하여 논한다. 다중상태 소나망에 대한 기존 정보융합방법인 거리정보만을 이용하는 Maximum Likelihood (ML)와 거리정보와 방위정보를 함께 이용하는 Least Square (LS)에 대한 분석을 기반으로 거리정보와 방위정보를 함께 이용하는 ML을 제안한다. 각 센서가 거리정보와 방위정보를 이용한다고 가정할 때 다양한 잡음 환경하에 기존 방법과 제안된 방법에 대한 비교 실험을 수행했다. 또한 센서 수와 송신기, 수신기간 거리에 따른 표적위치 추정성능에 대한 연구를 수행했다. 실험결과에 의하여 제안된 거리정보와 방위정보를 함께 이용하는 ML의 제곱근 오차 성능이 송수신기간 거리가 길수록, 수신기 수가 적을수록 기존의 거리정보만 이용하는 ML, LS보다 더 우수한 것으로 나타났다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.15.1-15.6
• /
• 2016

Background: The utilization of a cone-beam computed tomography (CT)-assisted surgical template allows for predictable results because implant placement plans can be performed in the actual surgery. In order to assess the accuracy of the CT-guided surgery, angular errors and shoulder/apex distance errors were evaluated by data fusion from before and after the placement. Methods: Computer-guided implant surgery was performed in five patients with 19 implants. In order to analyze differences of the implant fixture body between preoperative planned implant and postoperative placed implant, angular error and distance errors were evaluated. Results: The mean angular errors between the preoperative planned and postoperative placed implant was $3.84^{\circ}{\pm}1.49^{\circ}$; the mean distance errors between the planned and placed implants were $0.45{\pm}0.48mm$ horizontally and $0.63{\pm}0.51mm$ vertically at the implant neck and $0.70{\pm}0.63mm$ horizontally and $0.64{\pm}0.57mm$ vertically at the implant apex for all 19 implants. Conclusions: It is important to be able to utilize these methods in actual clinical settings by improving the various problems, including the considerations of patient mouth opening limitations, surgical guide preparation, and fixation.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
• /
• pp.60-61
• /
• 2001

We present our experimental results on the recording and retrieving of multiplexed near-field holograms using near-field scanning optical microscopy (NSOM) and a conventional rectangular-parallelepiped or cubic photorefractive crystal. Experimental results show that we can get the angular selectivity comparable with that of the volume hologram and the retrieved spot size was smaller than the Rayleigh's limit. The results also show that the angular selectivity and the retrieved spot size are strongly dependent on the recording distance between the object and the recording medium.