• 한국전산유체공학회:학술대회논문집
• /
• 2006.10a
• /
• pp.142-146
• /
• 2006

The behavior of a hemisphere-cylinder flight vehicle at high angles of attack and side slip angles have been studied. $0^{\circ}{\sim}35^{\circ}$ angles of attack and $0^{\circ}{\sim}5^{\circ}$ side slip angles were selected as fright conditions at Mach No. 0.3. Flow changes from low angles of attack to high angles of attack were compared and analyzed. We changed from low to high angles of attack with small side slip angles. We compared normal, side and axial force coefficients among various test cases.

• Journal of the Korean Society of Safety
• /
• v.24 no.2
• /
• pp.69-75
• /
• 2009

It is well-known that lifting capacity of a worker is influenced by body posture during the task. When a task analyst make use of RULA and REBA Trunk and upper arm angles are recorded in a separate item. It means that the interaction between the angles of two body segments may be ignored in a final score. The NLE(NIOSH Lifting Equation) has been used to supplement this problem. However, there is no study to validate the result of RWL (Recommended Workload Limit) under the existence of interactions between trunk and upper arm angles. The goal of this study was to assess the effect of the interaction between trunk and upper arm angles. Three responses, including NMVC(normalized maximum voluntary contraction), RWL(Recommended Weight Limit) and subjective judgment in psychophysical method (Borg's scale), were recorded according to the combinations of three trunk angles and nine upper arm angles. The results showed that lifting capacity is highly influenced by interaction of two body segments(trunk and upper arm). It means that the task workload has to be analyzed along with the interaction of trunk angles and upper arm angles when the task analyst assesses potential risk factors on the postures. This study may be able to be a fundamental study to develop an assessment method for lifting task analyses according to body postures.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.10a
• /
• pp.26-31
• /
• 1998

The effect of tool angles on the surface roughness in face milling is studied. First, the relation between tool angles and rotation angles is identified. Using this relationship, it is obtained that the projection of insert nose shape on cutting profile, which is a part of ellipse. The effect of spindle tilt is also considered for the tool angles. It si shown that tool angles along with nose radius and feed rate have an effect on surface roughness.

• Journal of Educational Research in Mathematics
• /
• v.14 no.1
• /
• pp.111-127
• /
• 2004

In this note we examined some terms, parallel lines and angles in elementary school mathematics and middle school mathematics respectively. Since some terms are represented early in elementary school mathematics and not repeated after, some students are not easy to apply the terms to their lesson. Also, since the relation between parallel lines and angles are treated intuitively in 7-th grade, applying the relation for a proof in 8-th grade would be meaningless. For the variety of mathematics education, it is desirable that the relation between parallel lines and angles are treated as postulate. Also, for out standing students, it is desirable that we use deductive reasoning to prove the relation between parallel lines and angles as a theorem. In particular, the treatments of vertical angles and the relation between parallel lines and angles in 7-th grade text books must be reconsidered. Proof is very important in mathematics, and the deductive reasoning is necessary for proof. It would be efficient if some properties such as congruence of vertical angles and the relation between parallel lines and angles are dealt in 8-th grade for proof.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.120-124
• /
• 1995

TCSC can not only increase power flow but also damp low frequency oscillation by controlling firing angles of thyristors. But, a model considering voltage, current firing angles is not derived. This paper used a small signal model considirng these variables which was derived in paper [1]. TCSC model is combined with swing equation. Being related to rotor angles and firing angles of thyristors, current and synchronizing torque coefficient is reformulated. Because firing angles of thyristors can be controlled only twice within one period, swing equation is transformed to discrete time model. It is shown that low frequency oscillation can be damped by controlling firing angles in one machine infinite bus power system.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1527-1536
• /
• 2014

This paper investigates the optimal values of turn-on and turn-off angles, and ratio of flux linkage at turn-off angle and peak phase current positions of optimal control for accomplishing maximum output power in an 8/6 Switched Reluctance Generator (8/6 SRG). Phase current waveform is analyzed to determine optimal excitation angles (optimal turn-on and turn-off angles) of the SRG for maximum output power which is applied from a nonlinear magnetization curve in terms of control variables (dc bus voltage, shaft speed, and excitation angles). The optimal excitation angles in single pulse mode of operation are proposed via the analytical model. Simulated and experimental results have verified the accuracy of the analytical model.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.402-404
• /
• 2003

In case to look at considering affects of skew angles into the curved bridges, this study mainly focalized to compare and analyze of the influence of skew angles to curved bridges along with analysis of the behavior of entire construction in accordance with changes of skew angles and curvature. With explanation of macroscophic behavior of curved bridges with skew angles through this study, it is mostly to grasp with characteristics and structural weaknesses of skew curved bridges compared with straight skew bridges.

• Journal of the Korean Data and Information Science Society
• /
• v.10 no.1
• /
• pp.67-77
• /
• 1999

For a orientation-shift model supported on the unit sphere, Euler angles are the conventional measure to parametrize orientation-shifts. The essential role which is played by rotationally symmetry of an underlying distribution is reviewed. In this paper we propose the inference procedure based on Euler angles for the rotationally symmetric spherical distribution. The likelihood ratio test(LRT) based on the Euler angles is worked out. The asymptotic distribution of the test under the null hypotheses and certain contiguous alternatives is obtained.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.2
• /
• pp.51-62
• /
• 2006

In assessing risks related to working posture, pictures of postures are taken from various directions, which can be a source of observation error. Joint postures of the neck, lower back, knee, shoulder, and elbow were taken from 7 different viewing angles and 19 observers estimated joint angles by observing the pictures in 2-dimensional display. The joint angles were also measured using an optoelectronic motion measurement system. The estimation error increased as the viewing angle varies from the right side of the human body, but the patterns differ according to which joint angles were being observed. Guidelines to increase the validity of observation of joint angles were presented based on the results. In general, it is recommended to maintain the viewing angle within 20 degrees from the right side of the human body, while different ranges of viewing angle are recommended for each joint angle.

• PNF and Movement
• /
• v.19 no.1
• /
• pp.43-55
• /
• 2021

Purpose: The purpose of this study was to determine the effects of contract relaxation and a combination of isotonics in proprioceptive neuromucular facilitation (PNF) on hip and lumbopelvic motions of male patients with chronic low back pain. Methods: As the subjects of this study, a total of 45 male patients with chronic low back pain were divided into groups: 15 who underwent contract relaxation (CR) of the PNF of their hip joints, 15 who underwent a combination of isotonics (CI) of the PNF, and 15 who underwent both techniques. A device for analyzing three-dimensional motion was used to measure hip medial rotation angles, lumbopelvic rotation angles, and hip medial rotation angles at the start of lumbopelvic rotation during hip medial rotation. A two-way repeated measures ANOVA was used to compare the average values. Results: There were interactions in the hip medial rotation angles, lumbopelvic rotation angles and hip medial rotation angles at the start of lumbopelvic rotation based on the methods and periods of exercise (p < 0.05). The CR and the CR+CI groups displayed more increased hip medial angles when compared to the CI group. The CR+CI group had more decreased lumbopelvic rotation angles when compared to the CR and the CI groups. The CR+CI group had more increased hip medial rotation angles at the start of lumbopelvic rotation when compared to the CR and the CI groups. Conclusion: It can be concluded that the combination of stretching and stability exercises was effective in male patients with chronic low back pain who showed limited hip medial rotation.