• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1295-1296
• /
• 2006

수소화된 비정질 실리콘 박막 트랜지스터(a-Si:H TFT)의 이력 현상이 능동형 유기 발광 다이오드(Active-Matrix Organic Light Emitting Diode) 디스플레이 패널을 구동할 경우에, 발생할 수 있는 잔상(Residual Image) 문제를 단위 소자 및 회로에서 실험을 통하여 규명하였다. 게이트 시작 전압을 바꾸어 VGS-ID 특성을 측정할 경우, 게이트 시작 전압이 5V에서 시작한 VGS-ID 곡선이 10V에서 시작한 VGS-ID 곡선에 비해 왼쪽으로 0.15V 이동하였다. 이러한 결과는 게이트 시작 전압의 차이에 의해 발생한 트랩된 전하량(Trapped Charge) 변화로 설명할 수 있다. 또한, 인가하는 게이트 전압 간격을 0.5V에서 0.05V로 감소시켰을 때 전하 디트래핑 비율의 변화(Charge De-trapping Rate)로 인하여, 이력 현상(Hysteresis Phenomenon)으로 인한 단위 소자에서의 문턱전압의 변화가 0.78V에서 0.39V로 감소함을 관찰하였다. 제작된 2-TFT 1-Capacitor의 ANGLED 화소에서 (n-1)번째 프레임에서의 OLED 전류가 (n)번째 프레임에서의 OLED 전류에 35%의 전류오차를 발생시키는 것을 측정 및 분석하였다.

• The Korean Journal of Pain
• /
• 제33권1호
• /
• pp.54-59
• /
• 2020

Background: The median nerve cross-sectional area (MNCSA) is a useful morphological parameter for the evaluation of carpal tunnel syndrome (CTS). However, there have been limited studies investigating the anatomical basis of median nerve flattening. Thus, to evaluate the connection between median nerve flattening and CTS, we carried out a measurement of the median nerve thickness (MNT). Methods: Both MNCSA and MNT measurement tools were collected from 20 patients with CTS, and from 20 control individuals who underwent carpal tunnel magnetic resonance imaging (CTMRI). We measured the MNCSA and MNT at the level of the hook of hamate on CTMRI. The MNCSA was measured on the transverse angled sections through the whole area. The MNT was measured based on the most compressed MNT. Results: The mean MNCSA was 9.01 ± 1.94 ㎟ in the control group and 6.58 ± 1.75 ㎟ in the CTS group. The mean MNT was 2.18 ± 0.39 mm in the control group and 1.43 ± 0.28 mm in the CTS group. Receiver operating characteristics curve analysis demonstrated that the optimal cut-off value for the MNCSA was 7.72 ㎟, with 75.0% sensitivity, 75.0% specificity, and an area under the curve (AUC) of 0.82 (95% confidence interval [CI], 0.69-0.95). The best cut off-threshold of the MNT was 1.76 mm, with 85% sensitivity, 85% specificity, and an AUC of 0.94 (95% CI, 0.87-1.00). Conclusions: Even though both MNCSA and MNT were significantly associated with CTS, MNT was identified as a more suitable measurement parameter.

• 한국임상수의학회지
• /
• 제4권1호
• /
• pp.395-401
• /
• 1987

In this study, the effect of ambient temperature on the 45$^{\circ}$micro ESR/hr of cattle blood were observed, and a correction chart for correcting observed values at any ambient temperature to standard values at 20$^{\circ}C$ was plotted. Besides, the effect of storage temperature of blood on the 45$^{\circ}$micro ESR/hr was surveyed. The results were as follows: 1. The values of the 45$^{\circ}$micro ESR/hr were increased as the ambient temperature were elevated(P<0.01), and lower the value of PCV, higher the effect of temperature on the 45$^{\circ}$micro ESR/hr was observed(P<0.01). 2. Regression of values of 45$^{\circ}$micro ESR to ambient temperature in all the group of different level of blood PCV showed linear regression with the highly significant coefficient of correlation. With the results, correction chart was drawn as in Fig. 1. 3. In the purpose to verify the reliability of correction chart, observed values of 45$^{\circ}$micro ESR/hr in field(out door) were corrected to values at 20$^{\circ}C$ by the correction chart(Fig. 1), comparing with the observed values at 20$^{\circ}C$ of standard temperature. No significant differences were found between two groups mentioned above. 4. In the study on the effect of storage temperature of the blood on the 45$^{\circ}$micro ESR/hr, group of storage temperature at 5$^{\circ}C$ showed statistically no significant differences untill 24 hours in contrast with standard control group.

• 한국전문물리치료학회지
• /
• 제26권4호
• /
• pp.29-34
• /
• 2019

Background: The serratus anterior is one of the most important muscle for maintaining good scapular alignment in the shoulder joint. The pectoralis major and upper trapezius may also compensate for weak serratus anterior muscles. The push-up plus exercise has been identified as the optimal exercise for maximum activation of the serratus anterior. Objects: The purpose of this study was to examine differences in surface electromyography (EMG) activity of upper trapezius, pectoralis major, and serratus anterior muscles during push-up plus exercises on variously angled surfaces in subjects with winged scapula. Methods: Sixteen subjects with winged scapula (male=5, female=11) volunteered for this study. The subjects performed push-up plus exercise on four different tilt angles, namely $0^{\circ}$, $30^{\circ}$, $60^{\circ}$, and $90^{\circ}$. EMG activities in the serratus anterior, upper trapezius, and pectoralis major muscles during performance of push-up plus exercise were measured in all subjects. Data were processed from repeated measures one-way analysis of variance. Results: There was significant difference in the muscle activity of the serratus anterior on the different surface angles (p<.05). The results of the post-hoc analysis showed significantly greater serratus anterior muscle activity on a surface at a $0^{\circ}$ angle than at others tilt angles (p<.05). There was also significant difference in the ratio of serratus anterior to upper trapezius and serratus anterior to pectoralis major across the four surfaces (p<.05), and post-hoc analysis showed significantly greater values on the $0^{\circ}$ surface than on other tilts (p<.05). Conclusion: This study found that performing push-up plus exercises on a flat surface with $0^{\circ}$ and $30^{\circ}$ tilt angle achieves high activation of the serratus anterior muscle for selective strengthening. It can also take into account the sequential application, which is first performed at a $30^{\circ}$ and at a $0^{\circ}$ tilt angle for and effective but not excessive muscle activation.

• 한국추진공학회지
• /
• 제14권4호
• /
• pp.32-38
• /
• 2010

본 연구에서는 딤플이 설치된 유로, 립이 설치된 유로, 립과 딤플이 함께 설치된 유로에서의 열전달성능을 천이액정법을 이용하여 측정하였다. 실험에 사용된 유로의 종횡비(W/H)는 4이고, 립의 높이는6 mm, 립 간 거리(P/e)는 10, 립이 설치된 각도는 $60^{\circ}$이며, 딤플의 직경은 6 mm, 딤플 중심간 거리(s/D)는 1.2로 하였다. 레이놀즈 수는 30000-50000에 대해 실험을 수행하였다. 립이 설치된 유로에서는 경사 립에 의해 발생된 이차유동이 열전달 계수를 증가시켰고, 립과 딤플이 함께 설치된 유로에서는 립 사이에 설치된 딤플이 열전달 계수를 더욱 증가시켰다. 열전달계수는 립과 딤플이 복합 적용된 유로, 립이 적용된 유로, 딤플이 적용된 순으로 나타났고, 열성능계수도 립과 딤플이 복합 적용된 유로에서 크게 나타났다.

• Structural Engineering and Mechanics
• /
• 제69권2호
• /
• pp.221-230
• /
• 2019

In this paper, shear behavior of non-persistent joint surrounded in concrete and gypsum layers has been investigated using experimental test and numerical simulation. Two types of mixture were prepared for this study. The first type consists of water and gypsum that were mixed with a ratio of water/gypsum of 0.6. The second type of mixture, water, sand and cement were mixed with a ratio of 27%, 33% and 40% by weight. Shear behavior of a non-persistent joint embedded in these specimens is studied. Physical models consisting of two edge concrete layers with dimensions of 160 mm by 130 mm by 60 mm and one internal gypsum layer with the dimension of 16 mm by 13 mm by 6 mm were made. Two horizontal edge joints were embedded in concrete beams and one angled joint was created in gypsum layer. Several analyses with joints with angles of $0^{\circ}$, $30^{\circ}$, and $60^{\circ}$ degree were conducted. The central fault places in 3 different positions. Along the edge joints, 1.5 cm vertically far from the edge joint face and 3 cm vertically far from the edge joint face. All samples were tested in compression using a universal loading machine and the shear load was induced because of the specimen geometry. Concurrent with the experiments, the extended finite element method (XFEM) was employed to analyze the fracture processes occurring in a non-persistent joint embedded in concrete and gypsum layers using Abaqus, a finite element software platform. The failure pattern of non-persistent cracks (faults) was found to be affected mostly by the central crack and its configuration and the shear strength was found to be related to the failure pattern. Comparison between experimental and corresponding numerical results showed a great agreement. XFEM was found as a capable tool for investigating the fracturing mechanism of rock specimens with non-persistent joint.

• 대한원격탐사학회지
• /
• 제37권1호
• /
• pp.169-176
• /
• 2021

The Global Space-based Inter-Calibration System (GSICS) is an international partnership sponsored by World Meteorological Organization (WMO) to continue and improve climate monitoring and to ensure consistent accuracy between observation data from meteorological satellites operating around the world. The objective for GSICS is to inter-calibration from pairs of satellites observations, which includes direct comparison of collocated Geostationary Earth Orbit (GEO)-Low Earth Orbit (LEO) observations. One of the GSICS inter-calibration methods, the Ray-matching technique, is a surrogate approach that uses matched, co-angled and co-located pixels to transfer the calibration from a well calibrated satellite sensor to another sensor. In Korea, the first GEO satellite, Communication Ocean and Meteorological Satellite (COMS), is used to participate in the GSICS program. The National Meteorological Satellite Center (NMSC), which operated COMS/MI, calculated the Radiative Transfer Model (RTM)-based GSICS coefficient coefficients. The L1P reproduced through GSICS correction coefficient showed lower RMSE and Bias than L1B without GSICS correction coefficient applied. The calculation cycles of the GSICS correction coefficients for COMS/MI visible channel are provided annual and diurnal (2, 5, 10, 14-day), but long-term evaluation according to these cycles was not performed. The purpose of this paper is to perform evaluation depending on the annual/diurnal cycles of COMS/MI GSICS correction coefficients based on the ray-matching technique using Suomi-NPP/Visible Infrared Imaging Radiometer Suite (VIIRS) data as reference data. As a result of evaluation, the diurnal cycle had a higher coincidence rate with the reference data than the annual cycle, and the 14-day diurnal cycle was the most suitable for use as the GSICS correction coefficient.

• 한국의상디자인학회지
• /
• 제23권1호
• /
• pp.113-127
• /
• 2021

This study aims to analyze the style of men's suits and extract expressional words for the development of semantic differential scales of visual images according to the change in silhouette. Research methods are literature studies, case studies, and questionnaires. The stimuli were created using CLO 3D, a virtual sewing CAD. This study's results are as follows: 1) The British suit jacket has an angled shoulder line using thin pads, and a slightly higher waistline. The pants of the suit have a high waistline and two pleats, so the thighs of the pants are wide. The American suit jacket has a natural shoulder line, and the waistline is not emphasized. The width of the jacket is relaxed, and the length is long. The pants of the suit have a higher waistline, and the pants are wide as well. The Italian suit jacket has wide shoulders, and the waistline is connected lower with a soft curve, and the length is relatively short. The trousers of the suit are tapered and get narrower as it goes down to the hem. 2) Because it originated in the practices of true bespoke tailoring, traditional British suits have a far more 'fitted' silhouette than the mass-produced styles that became emblematic of the American style. By the late 1950s, a sack-style suit was standard American business attire. This technique gives the sack suit its characteristically 'boxy' silhouette. The "Continental" presented a highly tailored silhouette, with padded shoulders, a slim, tight-fitting chest, and a closely tapered waist. The story was that Italian culture valued aesthetics over all else and thus sought the 'slim' suit style as much as possible. 3) The main expressional words of visual images for men's suits differ greatly depending on the silhouette of suit. The visual images are ranked in the order of 'neat', 'classic', 'educated', 'hard', 'mature', for fitted silhouettes. The words of 'masculine', 'basic', 'comfortable', 'simple', 'mature', 'conservative', 'modern', are ranked for boxy silhouettes. And the words of 'slim', 'young', 'neat', are noted for slim silhouettes.

• 식물분류학회지
• /
• 제51권2호
• /
• pp.115-132
• /
• 2021

Seven species and two varieties belonging to the genus Boehmeria Jacq. (Urticaceae) are known to be distributed in Korea. Among them, B. spicata, B. tricuspis, and B. tricuspis var. unicuspis were subjected to an external morphological study. Among the individuals believed to exhibit variations in the leaf shape, B. gracilis and B. silvestrii were newly recognized. Unlike related taxa, B. gracilis has middle leaves with an elliptic, broadly elliptic, ovate, or broadly depressed ovate shape, a regular and serrulate-dentate margin, and an unlobed and short caudate or cuspidate apex. Boehmeria silvestrii has middle leaves with 5-angled ovate, orbicular ovate or broadly ovate shapes, and 3- or 5-lobed and caudate apices. Therefore, we assigned the corresponding names 'Top-geo-buk-kko-ri' and 'Cham-geo-buk-kko-ri'. Meanwhile, the B. spicata complex (B. gracilis, B. silvestrii, B. spicata, and B. tricuspis var. unicuspis) is very closely related in terms of the morphological characters, whereas B. tricuspis exhibits no relationship. Furthermore, because the scientific name and type specimen of B. tricuspis var. unicuspis (Pul-geo-buk-kko-ri) are problematic, the correct name B. paraspicata Nakai and corresponding holotype are presented. Additionally, lectotypes of B. gracilis and B. silvestrii are newly designated here. A taxonomic treatment, descriptions, a key, photographs, type specimens, and leaf variation images of the B. spicata complex are provided in this study.

• Steel and Composite Structures
• /
• 제42권4호
• /
• pp.539-552
• /
• 2022

Concentrically braced frames (CBFs) possess high stiffness and strength against lateral loads; however, they suffer from low energy absorption capacity against seismic loads due to the susceptibility of CBF diagonal elements to bucking under compression loading. To address this problem, in this study, an innovative damper was proposed and investigated experimentally and numerically. The proposed damper comprises main plates and includes a flange plate angled at θ and a trapezius-shaped web plate surrounded by the plate at the top and bottom sections. To investigate the damper behaviour, dampers with θ = 0°, 30°, 45°, 60°, and 90° were evaluated with different flange plate thicknesses of 10, 15, 20, 25 and 30 mm. Dampers with θ = 0° and 90° create rectangular-shaped and I-shaped shear links, respectively. The results indicate that the damper with θ = 30° exhibits better performance in terms of ultimate strength, stiffness, overstrength, and distribution stress over the damper as compared to dampers with other angles. The hysteresis curves of the dampers confirm that the proposed damper acts as a ductile fuse. Furthermore, the web and flange plates contribute to the shear resistance, with the flange carrying approximately 80% and 10% of the shear force for dampers with θ = 30° and 90°, respectively. Moreover, dampers that have a larger flange-plate shear strength than the shear strength of the web exhibit behaviours in linear and nonlinear zones. In addition, the over-strength obtained for the damper was greater than 1.5 (proposed by AISC for shear links). Relevant relationships are determined to predict and design the damper and the elements outside it.