• 한국분무공학회지
• /
• 제13권1호
• /
• pp.9-15
• /
• 2008

This experimental study was carried out to examine the heat transfer characteristics of impinging air jet on a flat plate with a set of right angled triangle rods. Each right angled triangle rod in the array was positioned normal to the flow direction and parallel to the flat plate surface. The clearances from a right angled triangle rod to flat plate surface (C=1, 2 and 4 mm) and the distance from nozzle exit to flat plate (H=100 and 500 mm) were changed for the pitch between each right angled triangle rods (P=40 mm). As a result, heat transfer shows best performance at the clearance of C=1 mm, in case clearance changed, and the average heat transfer enhancement rate increased up to 47% compared to the result of a flat plate without a right angled triangle rod.

• 대한수학회지
• /
• 제59권4호
• /
• pp.717-731
• /
• 2022

We introduce the notion of quasi-roots and study their uniqueness in right-angled Artin groups.

• 대한수학회보
• /
• 제49권5호
• /
• pp.1057-1065
• /
• 2012

We prove that if $\widehat{\Gamma}$ is a co-contraction of ${\Gamma}$, then the right-angled Coxeter group $C(\widehat{\Gamma})$ embeds into $C({\Gamma})$. Further, we provide a graph ${\Gamma}$ without an induced long cycle while $C({\Gamma})$ does not contain a hyperbolic surface group.

• 대한골관절종양학회지
• /
• 제11권2호
• /
• pp.175-182
• /
• 2005

목적: 대퇴골에서 골 종양은 주로 근위 전자부와 원위 간단부에 발생한다. 그러나 대퇴골은 체중부하와 연관하여 종양의 크기에 따라서는 병적 골절을 유발하게 된다. 그러므로 종양제거후 대퇴골의 해부학적 특성을 고려한 angled blade plate로 보완해 준다면 생역학적 측면에서 그 예후를 훨씬 개선할 수 있을 것 여겨진다. 대상 및 방법: 1991년 10월부터 2005년 4월까지, 대퇴골에 발생한 골 종양을 제거하고 Blade Plate로 보완해준 환자 16명 17예를 대상으로 하였다. 종양제거 후 11예에서 골 이식으로, 6예에서 골 세멘트로 채워 넣었으며, 모든 예에서 angled blade plate를 사용하여 내고정을 시행하였다. 결과: 평균 추시 기간은 16명 환자(17예)에서 55.5개월 이었다. 시술 후 금속에 관련된 실패는 없었다. 종양의 재발로 인하여 재수술이 4예에서 있었으며 재수술전까지 내고정은 유지되었다. 결론: angled blade plate는 종양수술 후 이식 골의 결합이 이루어질 때까지 그 부위를 골절로부터 보호하며, 골 세멘트를 사용한 경우는 골 세멘트와 골조직과의 취약한 이음새를 골절로부터 보호하였다.

• Structural Engineering and Mechanics
• /
• 제56권4호
• /
• pp.589-603
• /
• 2015

The mixed-mode stress intensity factors of 2-D angled cracks are evaluated by Petrov-Galerkin natural element (PG-NE) method in which Voronoi polygon-based Laplace interpolation functions and CS-FE basis functions are used for the trial and test functions respectively. The interaction integral is implemented in a frame of PG-NE method in which the weighting function defined over a crack-tip integral domain is interpolated by Laplace interpolation functions. Two Cartesian coordinate systems are employed and the displacement, strains and stresses which are solved in the grid-oriented coordinate system are transformed to the other coordinate system aligned to the angled crack. The present method is validated through the numerical experiments with the angled edge and center cracks, and the numerical accuracy is examined with respect to the grid density, crack length and angle. Also, the stress intensity factors obtained by the present method are compared with other numerical methods and the exact solution. It is observed from the numerical results that the present method successfully and accurately evaluates the mixed-mode stress intensity factors of 2-D angled cracks for various crack lengths and crack angles.

• 한국유체기계학회 논문집
• /
• 제20권2호
• /
• pp.5-10
• /
• 2017

In this study, the Coanda effect inducing bump was applied to improve the film cooling effectiveness on the flat plate with $30^{\circ}$ and $45^{\circ}$ angled rectangular slots. The slot length to width ratio was 6. A cylindrical cap shaped structure, called Coanda bump, was installed at the exit of the slot to generate Coanda effect. The width and height of the bump was 10.5 mm and 1 mm, respectively. The film cooling effectiveness was measured at the fixed blowing ratio, M=2.0, using pressure sensitive paint (PSP) technique. The mainstream velocity was 10 m/s and the turbulence intensity was about 0.5%. Results showed that the film cooling effectiveness for case of $30^{\circ}$ angled slot was higher than that of $45^{\circ}$ angled slot. It was found that there was no positive effect of Coanda effect on the overall averaged film cooling effectiveness for the $30^{\circ}$ angled slot. On the other hand, for the $45^{\circ}$ angled slot, the film cooling effectiveness was improved with the installation of the Coanda bump.

• Korean Journal of Mathematics
• /
• 제29권3호
• /
• pp.577-580
• /
• 2021

For a finite simplicial graph 𝚪, let G(𝚪) denote the right-angled Artin group on the complement graph of 𝚪. For path graphs P_k, cycle graphs C_ℓ and complete bipartite graphs K_n,m, this article characterizes the embeddability of G(K_n,m) in G(P_k) and in G(C_ℓ).

• Tribology and Lubricants
• /
• 제25권5호
• /
• pp.298-304
• /
• 2009

An angled labyrinth seal is used for the diaphragm-packing-ring seal design of steam turbine due to its leakage reduction characteristic. CFD analysis using FLUENT has been performed to predict leakage and determine an optimum slanted angle which yields the best leakage reduction. Results show that the optimum value of slanted angle is $-30^{\circ}$ independent of number of labyrinth teeth, inlet pressure, and tooth height to pitch ratio. 3D CFD analysis has been performed for predicting leakage of the angled labyrinth seal. Comparing with the result of 2D CFD analysis, 3D CFD analysis shows 1.4% smaller.

• 한국전자파학회논문지
• /
• 제13권5호
• /
• pp.445-450
• /
• 2002

본 논문에서는 CPW(Coplanar waveguide)-to-microstrip right-angled 전이 구조에 대해서 해석하였다. 일반적으로 비대칭적인 CPW-to-microstrip 전이 구조는 불연속점에서 발생한 slot모드로 인해 심각한 공진이 발생한다. 공진 발생을 억제하기 위해서 일반적으로 많이 사용하는 air-bridge는 공진 발생을 근본적으로 제거시키지 못하고, 단지 공진 주파수만 이동시킨다. 따라서, 본 논문에서는 공진 발생을 제거하기 위해 offset microstrip을 사용하는 구조를 제안하였다. 제안된 구조는 불연속점에서 대칭을 유지함으로써 공진 발생 원인을 근본적으로 제거한 구조로 회로의 직접도가 높은 다층 기판에서 효과적으로 사용될 수 있을 것으로 기대된다.

• Tribology and Lubricants
• /
• 제25권2호
• /
• pp.96-101
• /
• 2009

In order to improve leakage characteristic, angled-circumferential-groove pump seal is suggested. CFD analysis using FLUENT has been performed to predict leakage and determine an optimum slanted-groove angle $\alpha$ which yields the best leakage reduction. The optimum value of $\alpha$ ranges from $45^{\circ}$ to $60^{\circ}$ and depends on the pressure difference of seal and number of grooves for the same groove geometry. The maximum leakage reduction ratio increases as increasing the pressure difference of angled-circumferential-groove pump seal with the optimum value of $\alpha$.