• The Research Journal of the Costume Culture
• /
• v.13 no.3 s.56
• /
• pp.439-451
• /
• 2005

This study was to provide the fundamental data for the ease necessary to design clothes by investigating the variation of the upper body surface with the method of surgical tape. The subject were 8 young women in the standard somatotype. In the form of body surface according to arm movements, the shape of armscye circumference became gentle from the sunken form for the standing posture; scye depth became lower; lateral shoulder moved and rose toward the front center as the angle of arm movement became larger; scye depth is greatest in the standing. The items of horizontal ware largest in the standing posture except for front neck base circumference and front interscye breadth for side $90^{\circ}$ movement. In the items of vertical, while most of the front items increased but back ones generally decreased for all movement compared to the standing. After comparing differences in actual values between the form of body surface in the standing posture and the direct measurement, the following ease were suggested considering minimum measures to accommodate daily movements. Bust circumference/2 = 3cm; waist circumference/2 = 1.5cm; front interscye breadth/2 = 0.6cm; back interscye breadth/2 = 0.6cm; and underarm depth = 1.5cm

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1204-1208
• /
• 2011

In this study, we proposed the system that calculates the algorithm with an accelerometer signal and detects the fall shock and it's direction. In order to gather the activity patterns of fall status and attach on the subject's body without consciousness, the device needs to be small. With this aim, it is attached on the right side of subject's waist. With roll and pitch angle which represent the activity of upper body, the fall situation is determined and classified into the posture pattern. The impact is calculated by the vector magnitude of accelerometer signal. And in the case of the elderly keep the same posture after fall, it can distinguish the situation whether they can stand by themselves or not. Our experimental results showed that 95% successful detection rate of fall activity with 10 subjects. For further improvement of our system, it is necessary to include tasks-oriented classifying algorithm to diverse fall conditions.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.181-189
• /
• 2005

To know the proper impact posture and changes for the various clubs, changes of impact variables according to the change of golf club length was investigated. Swing motions of three male low handicappers including a professional were taken using two high-speed video cameras. Four clubs iron 7, iron 5, iron 3 and driver (wood 1) were selected for this experiment. Three dimensional motion analysis techniques were used to get the kinematical variables. Mathcad and Kwon3D motion analysis program were used to analyze the position, distance and angle data in three dimensions. Major findings of this study were as follows. 1. Lateral position of the head remained more right side of the target up to 3.5cm compared to the setup as the length of the club increased. 2. Left shoulder raised up to 5cm and right shoulder lowered up to 2.5cm compared to setup. The shoulder line opened slightly (maximum 11 degrees) to the target line. 3. Forward lean angle of the trunk decreased up to 4 degrees (more erected) compared to setup. 4. Side lean angle of the trunk increased compared to setup and increased up to 16 degrees as the club length increased. 5. The pelvis moved to the target line direction horizontally and opened up to 31 degrees. Right hip moves laterally to the grip position at the setup. 6. Flexion of the left leg maintained almost constantly but the right leg flexed up to 11 degrees compared to setup. 7. Left arm is straightened but the right arm flexed about 20degrees compared to straight. 8. Center of the shoulders were in front of the knees and toes of the feet. 9. Hands moved to the left (8.7cm), forward (5.7cm) and upward (11.6cm) compared to the setup. This is because of the rotation of pelvis and shoulders. 10. Shaft angle to the ground was smaller than the lie angle of the clubs but it increased close to the lie of the clubs at impact.

• The Journal of Korean Physical Therapy
• /
• v.21 no.4
• /
• pp.9-16
• /
• 2009

Purpose: This study was done to assess the effect of changes in forward head posture (FHP), neck mobility and headache clinical parameters on episodic tension-type headache (ETTH) and chronic tension-type headache (CTTH) who did craniocervial exercises. Methods: Twelve CTTH subjects and twelve ETTH subjects were studied. Side-view pictures of subjects were taken in both sitting and standing positions, in order to assess FHP by measuring the craniovertebral angle. Cervical range of motion (CROM) was employed to measure cervical mobility. A headache diary was kept to assess headache intensity, frequency, and duration. All subjects did three types of craniocervical exercise over 8 weeks. Measurements were done at pre-treatment, and at 4 and 8 weeks post-treatment. Results: Forward head posture and headache-related clinical parameters showed a significant improvement after craniocervical exercise (p<0.05). Flexion/extension and left/right rotation of CROM was significantly increased after the intervention (p<0.05), whereas changes in left/right bending did not reach statistical significance. Conclusion: This study indicates that craniocervical exercise may be effective in the management of tension-type headache.

• Journal of Korean Physical Therapy Science
• /
• v.30 no.3
• /
• pp.14-22
• /
• 2023

Background: This study was to investigate the relationship between scapular downward rotation ratio (SDRR), lower trapezius (LT) muscle, and rounded shoulder angle (RSA) on each side in subjects with scapular downward rotation syndrome (SDRS). Design: Cross-sectional Study Methods: Fifteen subjects have participated in this study. The RSA and SDRR were assessed using a tape measure in standing posture. The RSA was computed by the angle made by two lines: one was the distance between the root of the scapula and the acromion, and the other was the distance between the acromion and the horizontal line in the root of the scapula. The SDRR was computed by two horizontal lines: one was the distance between the mid-line and root of the scapula, and the other was the distance between the mid-line and inferior angle of the scapula. LT muscle strength was performed in a prone position by the hand-held dynamometer. Results: There was a positive correlation between SDRR and LT strength in the less affected sides (r=.59; p=.02), however, there was no correlation between RSA and LT strength in the more affected sides (p>.05).

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.11 no.1
• /
• pp.39-44
• /
• 2013

Purpose : The purpose of present study is to evaluate the joint angles of legs in the standing posture for six patients with unilateral knee osteoarthritis. Methods : The participants underwent unilateral total knee replacement. A motion analysis was used to measure the joint angles of the hip, knee, and ankle. The measurements were taken before the surgery, one week and two weeks after the surgery. Both sides of the legs were evaluated. Results : This result showed that after a certain healing period, both hip joint angles showed a significant difference while there was no significant difference in the knee and ankle joint angles. After surgery, the angle of ankle dorsiflexion was smaller on the operated side than the opposite side compared to the pre-surgery measurements. Conclusion : After surgery, the asymmetry in a standing position left unchanged due to contracture of the knee joint and tightness in the hamstring muscle. Therefore, when physiotherapists plan an initial exercise programs for TKR patients, it is essential to apply adequate exercises which consider the contracture of the leg joints.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.95-104
• /
• 2005

To know the proper setup posture for the various clubs, changes of setup variables according to the change of golf club length was investigated. Swing motions of three male low handicappers including a professional were taken using two high-speed videocameras. Four clubs iron 7, iron 5, iron 3 and driver (wood 1) were selected for this experiment. Three dimensional motion analysis techniques were used to get the kinematical variables. Mathcad and Kwon3D motion analysis program were used to analyze the position, distance and angle data in three dimensions. The variables divided into three categories 1) position and width of anterior-posterior direction 2) position and width of lateral direction 3) angles and evaluated based on the theories of many good golf teachers. Major findings of this study were as follows. 1.The stance (distance between ankle joints) was increased as the length of the club increased but the increasing width was not large. It ranges from 5cm to 10cm and professional player showed small changes. 2. Forward lean angle of trunk was decreased (more erected) as the length of the club increased. It ranges from 30 degrees for iron7 to 25 degrees for driver. 3. Angle between horizontal and right shoulder were increased as the length of the club increased. It ranges from 10 degrees to 20 degrees and professional player showed small changes. 4. Anterior-posterior position of the shoulders were located in front of the foot for all clubs and the difference between the shoulder and knee position was decreased as the length of the club increased. 5. Anterior-posterior position of grip (hand) was located almost beneath the shoulders (2.5cm front) for iron7, but it increased to 10cm for the driver. This grip adjustment makes the height of the posture increased only 5cm from iron7 to driver. 6. Lateral position of grip located at 5cm left for the face of iron7, but it located at the right side (behind) for the face of driver. 7. Lateral position of the ball located at the 40%(15cm) of stance from left ankle for iron7 and located at the 10% (5cm) of stance for driver. 8. Head always located at the right side of the stance and the midpoint of the eyes located at the 37% of stance from the right ankle for all clubs. This means that the axis of swing always maintained consistently for all clubs. 9. Left foot opened to the target for all subject and clubs. The maximum open angle was 25 degrees. Overall result shows that the changes of the setup variables vary only small ranges from iron7 to driver. Paradoxically it could be concluded that the failure of swing result from the excessive changes of setup not from the incorrect changes. These findings will be useful for evaluating the setup motion of golf swing and helpful to most golfers.

• Journal of Korean Critical Care Nursing
• /
• v.11 no.1
• /
• pp.79-88
• /
• 2018

Purpose : This study was performed to evaluate the effects of a prolonged a $30^{\circ}$ side-lying position on comfort and skin condition by applying the trunk maintenance repositioning method, which can keep the $30^{\circ}$ side-lying position effective for preventing pressure ulcers. Method : Fifty-four healthy nurses working at a general hospital in Seoul were randomly assigned to an experimental group (n=27) or a control group (n=27) and assumed a position of lying on their right or left side for two hours. The trunk maintenance repositioning method was applied to the experimental group using the pillow made by the researcher, while the original repositioning method was applied to the control group using the regular pillow from the subject hospital. Participants' posture angles, comfort, and skin condition were measured at the time of the intervention, as well as at one and two hours after the intervention. Results : There was no statistically significant difference in position angle, comfort, skin condition change, or sacrum and greater trochanter pressure change between the two groups over time. Conclusion : It is necessary to review the method and frequency of change of position in each hospital. In addition, a proper position changing pillow should be developed in consideration of patients' various body shapes.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.3
• /
• pp.328-342
• /
• 1999

This study was performed to investigate the factors related to tooth wear. For this study, 78 patients with temporomandibular disorders and 76 dental students without any signs and symptoms of temporomandibular disorders were selected as the patients group and as the normal group, respectively. Preferred chewing side, Angle's classification, lateral guidance pattern, head and shoulder posture were observed clinically. Electromyographic activity of anterior temporalis and masseter muscle were recorded with $BioEMG^{(R)}$ and occlusal status were recorded with $T-Scan^{(R)}$. Wear facet area of each tooth was measured from working model of upper arch corresponding to the occlusal status from T-Scan. Wear facet area were measured with planimeter in $mm^2$. Total area were divided into incisal, canine, posterior tooth area. Anterior wearfacet area was incisor area plus canine area, and unilateral area was anterior area plus posterior area. The data collected were analyzed by SAS statistical program and the results of this study were as follows: 1. There was no significant difference between the two groups in total werafacet area, and male subjects showed tendency to have larger area in the normal group but female subjects showed tendency vice versa. 2. There was no significant difference related to preferred chewing side and Angle's classification, however some difference was observed by lateral guidance pattern. Anterior wear facet area in subjects of canine guidance was the largest in the three subgroups. 3. Subjects with head tilting to right side had larger posterior and total area, and subjects with higher shoulder in right side had larger canine and anterior area than any other subgrous. 4. Electromyographic activity of masseter muscle was more correlated with wear facet area than anterior temporalis muscle, and tooth contact number and force were significantly correlated with wear facet area, but the most important factor affecting tooth attrition was age.

• Journal of information and communication convergence engineering
• /
• v.2 no.2
• /
• pp.110-115
• /
• 2004

The prosthesis of current commercialized apparatus has considerable problems, requiring improvement. Especially, LLP(Lower Limb Prosthesis)-related problems have improved, but it cannot provide normal walking because, mainly, the gait control of the LLP does not fit with patient's gait manner. To solve this problem, HCI((Human Computer Interaction) that adapts and controls LLP postures according to patient's gait manner more effectively is studied in this research. The proposed control technique has 2 steps： 1) the multilayer neural network forecasts angles of gait of LLP by using the angle of normal side of lower limbs； and 2) the adaptive neural controller manages the postures of the LLP based on the predicted joint angles. According to the experiment data, the prediction error of hip angles was 0.32［deg.］, and the predicted error of knee angles was 0.12［deg.] for the estimated posture angles for the LLP. The performance data was obtained by applying the reference inputs of the LLP controller while walking. Accordingly, the control performance of the hip prosthesis improved by 80% due to the control postures of the LLP using the reference input when comparing with LQR controller.