• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.166-169
• /
• 2002

This paper is a part of the research into effects of increased UV-B (Ultraviolet-B, 280-320nm) upon the ecosystem of field wheat. Based on a 3-year project with intensified UV-B influencing the crop, observation and calculation were made of such factors and parameters as the morphology of a single wheat plant including its leaf area, leaf base angle and proportion of spacing between joints. The results show that the enhanced UV-B signifantly decreased wheat's SSLA, and the increased percentage of the lower LAI is associated with the change in leaf base angle and proportion of spacing between joints.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.4
• /
• pp.121-129
• /
• 2000

this paper develops a computational model for the turning maneuver analysis of a cabover type heavy truck. The model having 42 degree-of-freedom is developed using ADAMS. Leaf springs used in the front and rear suspension systems are modeled by dividing it three links and joining them with joints. Force and displacement relationship showing nonlinear hysteric characteristics of the leaf spring is measured and modeled with an exponential function. A velocity and force relationship of a shock absorber is measured and modeled with a spline function. And a stabilizer bar is modeled using ADAMS beam element to consider a twisting and bending effect. To verify the developed model an actual vehicle test is performed in the double lane change course with 50kph and 60kph vehicle velocity. In the actual vehicle test lateral acceleration roll angle and yaw rate are measured, The tendency and peak-to-peak values of the actual vehicle test and simultion results are compared each other.

• Journal of Korean Society of Forest Science
• /
• v.94 no.6
• /
• pp.446-452
• /
• 2005

In order to examine the natural distribution variations between groups of the Stewartia koreana, the leaf form characteristics of the investigation sites were analyzed by each group. As a result, the Mt. Kumsan group showed a smaller value in leaf length, width, area, and the number of veins, but not in the petiole length and serration number. Among each character, the coefficient of variation(CV) of the characters excluding petiole length and leaf area was in a comparatively narrow range, from 11.6~17.4%. On the other hand, the CV of petiole length and leaf area between the groups was 34.9% and 28.4% respectively. The CV of these characters within the group was also extraordinary- petiole length showed 29.5~42% and leaf area showed 27.7~40.7%. Also, the simple correlation analysis between 12 leaf characteristics showed that the correlation between leaf width and leaf area was high (r=0.975). The correlations between leaf length and leaf area, between leaf length and leaf width were 0.971 and 0.969, respectively. A negative correlation between angle of leaf base and ratio of leaf length to leaf width was discovered (r= -0.843), meaning that the ratio of leaf length to leaf width decreases as angle of leaf base increases. A cluster analysis was enforced among leaf characteristics of the selected group as a standard on the similarity of quantitative, qualitative measurements. The results showed that at a 0.4 distance level, the subjects could be classified into 4 groups. Group 1 was the Mt. Jogyesan and Mt. Kayasan group, group 2 was Mt. Paegunsan, group 3 was Mt. Unmunsan and Mt. Mudungsan, and group 4 was Mt. Kumsan. At a distance level of 0.6, the subjects were classified into two groups. Group 1 was the Mt. Ktimsan group and group 2 was Mt. Mudungsan, Unmunsan, Paegunsan, Kayasan, and Cogyesan. Especially the Mt. Kumsan group had the smallest value in the leaf characteristics of leaf length, width, area, and the number of veins, showing an obvious difference from the other five groups. There were five principal components that had a meaningful eigenvalue over 1.0 among the 12 extracted components. The explanatory power of the top two main components (leaf length and width) on the total variation was 52.7%. The explanatory power was 91.3% when all 5 main components were included.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.21-24
• /
• 2002

Many methods are available to measure leaf area index(LAI) directly and are variations of either Leaf area index(LAI) and leaf angle distribution are widely used indices of canopy structure that are difficult to measure directly. Direct measurements of canopy structure are tedious and labor intensive in small canopies and nearly impossible in large forest canopies. This study introduced fundamental theories in LAI measurements and applied that for several crops.

• Journal of the Korean Society of Tobacco Science
• /
• v.5 no.2
• /
• pp.63-69
• /
• 1983

The tensile strength (Pm) . elongation percentage ($\varepsilon$) , elastic modulus (I) , and specific volume (Sv) were calculated from the data of tensile characteristics of By 104 .and Burley 21 tobacco leaves, which were measured over a relative humidity from 60 to 80% at $20\pm2^{\circ}C$.The important results obtained were as follows.(1) Tensile strength(Pm) The "Pm"of By 104 was greater than that of Burley at. The "Pm"in both varieties were increased toward the upper stalk position and according to the decrease of relative humidity. The "Pm" of parallel piece to tile vein in a leaf were greater than that of right angle piece to the vein. (2) Elongation percentage ($\varepsilon$). The "s" of By 104 was higher than that of Burley 21. The "s" in both varieties were increased toward the upper stalk position and according to the increase of relative humidity. The "s" of parallel Piece to the vein in a Burley leaf was greater than that of right angle piece to the vein. (3) Elastic modulus (E) The "E" of Burley 21 leaf was higher than that of By 104. The "E" in both varieties were increased toward the lower stalk position and according to decrease of relative humidity. The "E"of parallel piece to the vein in both varieties leaves were greater than that of right angle piece to tile vein. (4) Specific volume (Sv) The "Sv" of Burley 21 leaf was increased than that of By 104. The "Sv" in both varieties were increased toward the lower stalk position and according to the decrease of relative humidity.ot;Sv" in both varieties were increased toward the lower stalk position and according to the decrease of relative humidity.dity.

• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.2
• /
• pp.83-91
• /
• 2017

Objectives: The purpose of this study was to evaluate the error of the leaf position accuracy of the MLC due to the gravity effect according to the gantry angle by using picket fence test using EPID and GafChromic EBT3 film. Materials and Methods: A 5 cm solid phantom was placed on the table and the SAD was set to 100 cm. The EBT3 film was placed exactly over the solid phantom and covered a 1.5 cm solid phantom and the picket fence test was performed. The EPID was measured under the same conditions as the EBT3 film at SID 100 cm. The gantry angles were measured at $0^{\circ}$, $90^{\circ}$, $180^{\circ}$ and $270^{\circ}$ in order to evaluate the position of the MLC according to the gantry angle. For the geometric evaluation of the MLC, the leaf position accuracy of the MLC was analyzed using the analysis program. Results: In case of EPID, when the gantry angle was changed to $0^{\circ}$, $90^{\circ}$, $180^{\circ}$, $270^{\circ}$, the difference of the position errors of the leaves was 0.18 mm, 0.31 mm, 0.20 mm, 0.26 mm on the average and the maximum values of the errors were respectively 0.44 mm, 0.54 mm, 0.34 mm, 0.44 mm. In case of EBT3 film, when the gantry angle was changed to $0^{\circ}$, $90^{\circ}$, $180^{\circ}$, $270^{\circ}$, the difference of the position errors of the leaves was 0.19 mm, 0.21 mm, 0.19 mm, 0.31 mm on the average and the maximum values of the errors were respectively 0.35 mm, 0.45 mm, 0.36 mm, 0.48 mm. Conclusion: In this study, we analyzed the position error of the leaf of the MLC according to the gantry angle, and confirmed the position error of the leaf by gravity effect. As a result of comparing the leaf position accuracy using EPID and EBT3 film according to the variation of gantry angle, a larger error occurred in the error analysis method using EPID than that of EBT3 film. Therefore, in the case of IMRT based on MLC, as well as verification of accurate dosimetry should be conducted, it is considered that the quality control and verification for the precise operation of the MLC will be needed. and it is necessary to compare and verify the method of analysis.

• Korean Journal of Plant Taxonomy
• /
• v.38 no.2
• /
• pp.93-109
• /
• 2008

The morphological variation was analysed to examine previous hypotheses on the taxonomy of B. amurensis complex which includes B. amurensis Rupr. var. amurensis, B. amurensis var. quelpaertensis (Nakai) Nakai and B. amurensis var. latifolia Nakai. The results from the univariational and principal components analyses employing 22 putatively diagnostic characters indicate that B. amurensis var. quelpaertensis is distinct from var. amurensis in the length and width of leaves, angle of leaf apex, distance between spinose teeth, length of internode, number of flowers per inflorescence, whereas B. amurensis var. latifolia is different from other varieties in the angle of leaf apex and leaf length/width ratio. In principal component analysis, the characters of the leaf including leaf width and length were the main characteristics to distinguish those three taxa. The evidence both from the principal components analyses and current geographical distribution pattern suggest that retaining the varietal status for the two taxa, B. amurensis var. latifolia and B. amurensis var. quelpaertensis is reasonable.

• Journal of the Korean Society of Tobacco Science
• /
• v.5 no.2
• /
• pp.25-32
• /
• 1983

To obtain basic information on the breeding of burley tobacco, classification of 41 varieties was carried out by using the cluster analysis of correlation coefficients and taxonomic distance based on twenty-one agromonic characters. Eight characters, such as days to flowering, length of flower axis, internode length, leaf length, yield, leaf angle to stem, vein angle to midrib and plant height, were useful in monothetic classification. Forty-one varieties were classified into four groups (I, II, III and IV) with weighted variable group method (WVGM ) and weighted jai. group method(WPGM), whereas the results classification of 33 varieties among them by WVGM were coincident with the results by WPGM. As for the characteristics of each group, group I related to late maturity, tall height and high yield, group II related to intermediate maturity, tall height and low yield, group 19 related to early maturity, intermediate height and low yield, and group W related to early maturity, short height and intermediate yield.

• Structural Engineering and Mechanics
• /
• v.59 no.3
• /
• pp.527-537
• /
• 2016

We describe a stress analysis of a single leaf flexure under torsion in which the warping effect is considered. The theoretical equations for the warping normal stress (${\sigma}_{xx}$) and shear stresses (${\tau}_{xz}$ and ${\tau}_{xy}$) are derived by applying the warping function of a rectangular cross-sectional beam and the twist angle equation that includes the warping torsion. The results are compared with those of the non-warping case and are verified using finite element analysis (FEA). A sensitivity analysis over the length, width, and thickness is performed and verified via FEA. The results show that the errors between the theory of warping stress results and the FEA results are lower than 4%. This indicates that the proposed theoretical stress analysis with warping is accurate in the torsion analysis of a single leaf flexure.

• Korean Journal of Plant Resources
• /
• v.19 no.1
• /
• pp.150-160
• /
• 2006

This study was performed to provide basic information of the development and breeding of new cultivars of Hibiscus syriacus L., which have more beautiful and diverse flowers. Morphological characteristics of the leaves and genetic variation of the leaves of two Jeoktanshim-line cultivars, Bulsae and Pyungsung, were crossed each other. The result of the cross between Bulsae and Pyungsung are as follows: Mean leaf length and width were 6.09cm and 3.36cm, respectively. Mean petiole length was 1.08cm, and mean shoulder width and incision depth were 1.50cm and 0.84cm, respectively. Mean leaf base angle was $98.56^{\circ}$. Leaf index and petiole length were the most important components of leaf characteristics. Two groups were clustered in distance level 5.4. The result of the cross between Pyungsung and Bulsae are as follows: Mean leaf length and width were 5.25cm and 3.10cm, respectively. Mean petiole length was 0.87cm, and mean shoulder width and incision depth were 1.50cm and 0.76cm, respectively. Mean leaf base angle was $107.87^{\circ}$, which was the widest among ten cross combinations. Two groups were clustered with seven leaf characteristics in distance level 4.2. Group I included two small groups, and group II included four small groups.