• 제목/요약/키워드: angle error reduction

검색결과 49건 처리시간 0.026초

Integrity Assessment and Verification Procedure of Angle-only Data for Low Earth Orbit Space Objects with Optical Wide-field PatroL-Network (OWL-Net)

  • Choi, Jin;Jo, Jung Hyun;Kim, Sooyoung;Yim, Hong-Suh;Choi, Eun-Jung;Roh, Dong-Goo;Kim, Myung-Jin;Park, Jang-Hyun;Cho, Sungki
    • Journal of Astronomy and Space Sciences
    • /
    • 제36권1호
    • /
    • pp.35-43
    • /
    • 2019
  • The Optical Wide-field patroL-Network (OWL-Net) is a global optical network for Space Situational Awareness in Korea. The primary operational goal of the OWL-Net is to track Low Earth Orbit (LEO) satellites operated by Korea and to monitor the Geostationary Earth Orbit (GEO) region near the Korean peninsula. To obtain dense measurements on LEO tracking, the chopper system was adopted in the OWL-Net's back-end system. Dozens of angle-only measurements can be obtained for a single shot with the observation mode for LEO tracking. In previous work, the reduction process of the LEO tracking data was presented, along with the mechanical specification of the back-end system of the OWL-Net. In this research, we describe an integrity assessment method of time-position matching and verification of results from real observations of LEO satellites. The change rate of the angle of each streak in the shot was checked to assess the results of the matching process. The time error due to the chopper rotation motion was corrected after re-matching of time and position. The corrected measurements were compared with the simulated observation data, which were taken from the Consolidated Prediction File from the International Laser Ranging Service. The comparison results are presented in the In-track and Cross-track frame.

한국 근해 대형 선망 어선의 횡동요 감쇠 특성 (Roll reduction characteristics of the offshore large purseiner in Korea)

  • 강일권;김형석;조효제;김정창;함상준
    • 수산해양기술연구
    • /
    • 제47권3호
    • /
    • pp.248-256
    • /
    • 2011
  • The inherent efficiency of a ship would be prior to any other quality factors in ship's safety, because lack of it may give rise to a serious sea casuality even if it were a light mistake in operation. And the representative casualty comes from a deficiency of stability and an operating error combined would be capsizing. The Korean offshore large purseiner looks to have a structural weak point with small range of stability in spite of her big initial metacentric height, and have various type of roll reduction devices in order to cover up the defect. The aim of this study is to grasp for the roll reduction characteristics of the purseiner with bilge keel only and a stern keel additionally attached. The results are summarized as follows; The rolling angle of the model ship was increased in accordance with increase of the wave period and height, especially at close to the natural wave period of her, and the trends were more distinguished in the situation of bilge keel only installation than in the stern keel additionally installed. And stern keel has not noticeable effect on the reduction of the roll in the light ship condition, but has a little effect in full load condition.

사면재해 방지를 위한 Soil Nailing 공법의 사면안정 도표 (Slope Stability Charts of Soil Nailing Method for Slope Diaster Prevention)

  • 김지성;구미옥
    • 한국콘텐츠학회논문지
    • /
    • 제16권7호
    • /
    • pp.457-464
    • /
    • 2016
  • Soil Nailing으로 보강된 사면안정 해석시 프로그램에 대한 전문적인 지식과 숙련된 기술이 필요하며, 해석시 많은 시간과 경제적 손실이 따르게 된다. 본 연구에서는 이러한 손실을 절약하고자 하였다. 네일링으로 보강된 사면안정해석에 강도감소법을 적용한 MIDAS GTS 프로그램을 사용한 후 그 결과를 도표화 하였다. 작성된 도표들은 신속한 사면재해 방지에 활용 가능하다. 네일의 간격, 입사각, 사면의 형태와 토질 정수를 변화시키며 구한 사면 안전율을 분석한 결과, 네일의 입사각이 $10{\sim}20^{\circ}$일 때 네일의 간격은 0.8~1.2m 사이일 때 효과적으로 나타났다. 사면의 경사가 1:0.5, 1:1, 1:2일 때 본 연구에서 제시한 안정도표와 Singh의 안정도표 값의 오차가 각각 3.45%, 8.65%, 4.35%,로 나타났다.

반응표면법을 이용한 코깅 토크 저감을 위한 BLDC 모터의 자석 최적설계 (Permanent Magnet Optimization for Reduction of Cogging Torque of BLDC Motor using Response Surface Methodology)

  • 이장원;심호경;왕세명
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2008년도 춘계학술대회논문집
    • /
    • pp.202-205
    • /
    • 2008
  • This paper presents an optimization of permanent magnet (PM) in a brushless dc (BLDC) motor using the response surface methodology (RSM). Size and angle of the PM are optimized to minimize the cogging torque, while reducing the magnitude of harmonic at a dominant frequency and maintaining the operating torque. A fitted RS model is constructed by verifying the high reliability of the total variation and the variation of estimated error. The optimized design is validated by carrying out the reanalysis and comparing to the initial model using the nonlinear transient finite element analysis.

  • PDF

3kW급 추적식 태양광발전 시스템 개발 (3W PV Generation System Development with Solar Tracker)

  • 강신영;박규남;박성용;김광헌
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
    • /
    • pp.687-691
    • /
    • 2003
  • In photovoltaic generation, PV module is used to generate the electricity, and this system has been in limelight as nonpolluting alternative energy source. But, as energy density is low and PV module cost is high, there is a disadvantage that initial investment cost go up. In this study, we studied the method of allowing a tracker, adequate to photovoltaic generation, for Increasing the generating. We determined the proper error angle in order to decrease the repeating number of tracking without a reduction of the generating by using our developed simulator. And, we presented the photovoltaic approach tracking control and achieved its experiment. Through the result of experiment, it is expected that the fault rate and the consumption of electric power in a tracker get reduced and its cost become cut down.

  • PDF

Wind load and wind-induced effect of the large wind turbine tower-blade system considering blade yaw and interference

  • Ke, S.T.;Wang, X.H.;Ge, Y.J.
    • Wind and Structures
    • /
    • 제28권2호
    • /
    • pp.71-87
    • /
    • 2019
  • The yaw and interference effects of blades affect aerodynamic performance of large wind turbine system significantly, thus influencing wind-induced response and stability performance of the tower-blade system. In this study, the 5MW wind turbine which was developed by Nanjing University of Aeronautics and Astronautics (NUAA) was chosen as the research object. Large eddy simulation on flow field and aerodynamics of its wind turbine system with different yaw angles($0^{\circ}$, $5^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$ and $45^{\circ}$) under the most unfavorable blade position was carried out. Results were compared with codes and measurement results at home and abroad, which verified validity of large eddy simulation. On this basis, effects of yaw angle on average wind pressure, fluctuating wind pressure, lift coefficient, resistance coefficient,streaming and wake characteristics on different interference zone of tower of wind turbine were analyzed. Next, the blade-cabin-tower-foundation integrated coupling model of the large wind turbine was constructed based on finite element method. Dynamic characteristics, wind-induced response and stability performance of the wind turbine structural system under different yaw angle were analyzed systematically. Research results demonstrate that with the increase of yaw angle, the maximum negative pressure and extreme negative pressure of the significant interference zone of the tower present a V-shaped variation trend, whereas the layer resistance coefficient increases gradually. By contrast, the maximum negative pressure, extreme negative pressure and layer resistance coefficient of the non-interference zone remain basically same. Effects of streaming and wake weaken gradually. When the yaw angle increases to $45^{\circ}$, aerodynamic force of the tower is close with that when there's no blade yaw and interference. As the height of significant interference zone increases, layer resistance coefficient decreases firstly and then increases under different yaw angles. Maximum means and mean square error (MSE) of radial displacement under different yaw angles all occur at circumferential $0^{\circ}$ and $180^{\circ}$ of the tower. The maximum bending moment at tower bottom is at circumferential $20^{\circ}$. When the yaw angle is $0^{\circ}$, the maximum downwind displacement responses of different blades are higher than 2.7 m. With the increase of yaw angle, MSEs of radial displacement at tower top, downwind displacement of blades, internal force at blade roots all decrease gradually, while the critical wind speed decreases firstly and then increases and finally decreases. The comprehensive analysis shows that the worst aerodynamic performance and wind-induced response of the wind turbine system are achieved when the yaw angle is $0^{\circ}$, whereas the worst stability performance and ultimate bearing capacity are achieved when the yaw angle is $45^{\circ}$.

Field measurement and CFD simulation of wind pressures on rectangular attic

  • Peng, Yongbo;Zhao, Weijie;Ai, Xiaoqiu
    • Wind and Structures
    • /
    • 제29권6호
    • /
    • pp.471-488
    • /
    • 2019
  • Wind pressure is a critical argument for the wind-resistant design of structures. The attempt, however, to explore the wind pressure field on buildings still encounters challenges though a large body of researches utilizing wind tunnel tests and wind field simulations were carried out, due to the difficulty in logical treatments on the scale effect and the modeling error. The full-scale measurement has not yet received sufficient attention. By performing a field measurement, the present paper systematically addresses wind pressures on the rectangular attic of a double-tower building. The spatial and temporal correlations among wind speed and wind pressures at measured points are discussed. In order to better understand the wind pressure distribution on the attic facades and its relationship against the approaching flow, a full-scale CFD simulation on the similar rectangular attic is conducted as well. Comparative studies between wind pressure coefficients and those provided in wind-load codes are carried out. It is revealed that in the case of wind attack angle being zero, the wind pressure coefficient of the cross-wind facades exposes remarkable variations along both horizontal and vertical directions; while the wind pressure coefficient of the windward facade remains stable along horizontal direction but exposes remarkable variations along vertical direction. The pattern of wind pressure coefficients, however, is not properly described in the existing wind-load codes.

Rotated-symbol Generalized Spatial Modulation

  • Muchena, Nishal;Murtala, Sheriff;Holoubi, Tasnim;Mohaisen, Manar
    • International Journal of Internet, Broadcasting and Communication
    • /
    • 제11권3호
    • /
    • pp.34-40
    • /
    • 2019
  • In spatial modulation (SM), both the signal symbol and spatial symbol, i.e., the index of the antenna from which signal symbol is transmitted, carry information. To increase the number of bits carried by spatial symbols, more transmit antennas are required. In the generalized SM (GSM), the same signal symbol is transmitted from a combination of antennas, resulting in a reduction in the number of antennas required to achieve a given spectral efficiency. In this paper, we propose a rotated-symbol GSM (RGSM), in which the signal symbol is rotated with an angle corresponding to the position of the antenna index within the combination. This increases the number of spatial symbols by a factor equivalent to the length of the antenna combinations of the GSM. Numerically, SM, GSM and RGSM require 128, 17 and 12 transmit antennas to convey seven bits through the spatial symbols. Simulation results show that RGSM performs relatively close to GSM, and in several system settings, their error performances coincide.

개별적 가중치 평균을 이용한 2차원 곡선의 스무딩 (Planar Curve Smoothing with Individual Weighted Averaging)

  • 류승필
    • 정보과학회 논문지
    • /
    • 제44권11호
    • /
    • pp.1194-1208
    • /
    • 2017
  • 잡음제거에 많이 사용되는 평균 스무딩 방법은 곡률이 큰 코너와 잡음을 구분하지 못하므로 코너와 같은 특징점이 이동하거나 없어질 수 있고, 또한 곡선의 수축(shrinking)으로 곡선 내의 면적 오차가 커지는 문제점들이 있다. 이 논문에서는 입력곡선을 다각형 근사화하고 근사화된 다각형의 정보를 스무딩에 이용하여 이 문제점들을 완화시키는 방법을 제안한다. 제안된 방법은 근사화된 다각형과 입력곡선간의 오차와 다각형의 꼭짓점 각도를 이용하여 입력곡선의 각 점마다 개별적으로 스무딩 가중치를 정한다. 이 때 각 점의 가중치는 스무딩 후 점의 이동거리가 그 지역의 잡음크기의 평균에 가까워지도록 정해진다. 제안된 방법으로 잡음이 추가된 곡선을 스무딩하면 스무딩된 곡선이 잡음이 없는 원래곡선에 근접함을 실험으로 확인할 수 있다. 또한 크기가 작은 폐곡선들에 대해 스무딩의 정도를 늘여도 제안된 방법은 기존의 평균 스무딩 방법에 비해 곡선의 면적 축소가 많지 않다.

The Effects of Resistance Exercise and Balance Exercise on Proprioception and WOMAC Index of Patients with Degenerative Knee Osteoarthritis

  • Yun, Young-Dae;Shin, Hee-Joon;Kim, Sung-Joong;Lim, Sang-Wan;Choi, Suk-Ju;Seo, Dong-Kyu;Kim, Hong-Rae;Kim, Jung-Hee;Lee, Joo-Sang;Kim, Mi-Jung;Kim, Soon-Hee
    • 국제물리치료학회지
    • /
    • 제1권2호
    • /
    • pp.169-175
    • /
    • 2010
  • The purpose of this study was to analyze and compare the effect of resistance exercise and balance exercise on proprioception and WOMAC index of patients with degenerative knee osteoarthritis. A total of 40 subjects participated in this study. The subjects were diagnosed with degenerative knee osteoarthritis and all were more than 60 years old. They were divided into three groups. Group I(n=8) was trained with resistance exercise, Group II(n=6) was trained with balance exercise and Group III(n=6) was trained with range of motion as a control. The results of this study were as follows. It was significantly indicated that the resistance exercise group and balance exercise group elicited error-reduction on proprioception goal-angle (p<.05). There was a statistically significant difference on proprioception between resistance exercise group and control(range of motion) group. There was a statistically significant reduction on WOMAC index between resistance exercise group and balance exercise group (p<.05) and on the WOMAC index between resistance exercise group and range of motion group(p<.05). In conclusion, resistance exercise and balance exercise are effective on degenerative knee osteoarthritis and resistance exercise is the most effective for improving proprioception and WOMAC index. More research on the intervention according to the degree of degenerative knee osteoarthritis is needed.

  • PDF