• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.2
• /
• pp.24-30
• /
• 2013

To guarantee the exact control of missile warhead, it is inevitable to ensure the stabilities in the view points of structural and fluid/thermo dynamics of the rocket motor. Specially, despite of shortness in operating time of the rocket motor which is initial turning type of missile, it occurs frequently some problems of ablation at the neighborhood of the nozzle throat, with the result that the system itself gets to failure. In these connections, in the present study, the effect of the operating time of a rocket motor on the coefficient of convective heat transfer at the nozzle wall is investigated by numerical analysis. As a result, it is turned out that the heat transfer coefficient is largest at the just ahead of nozzle throat and decreases with the increase of operating time of the rocket motor. Furthermore, we found that the radius of curvature of throat becomes smaller, the maximum coefficient of convective heat transfer becomes larger.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.4
• /
• pp.556-567
• /
• 2020

Objective: To improve the utility of native grass resources as feed in China, we investigated the dynamics of protein and carbohydrate fractions among Inner Mongolian native grasses, during ensiling and the aerobic stage, using the Cornell Net Carbohydrate and Protein System. Methods: Silages were prepared without or with lactic acid bacteria (LAB) inoculant. We analyzed the protein and carbohydrate fractions and fermentation quality of silages at 0, 5, 15, 20, 30, and 60 d of ensiling, and the stability at 0.5, 2, 5, and 10 d during the aerobic stage. Results: Inner Mongolian native grass contained 10.8% crude protein (CP) and 3.6% water-soluble carbohydrates (WSC) on a dry matter basis. During ensiling, pH and CP and WSC content decreased (p<0.05), whereas lactic acid and ammonia nitrogen (N) content increased (p<0.05). Non-protein N (PA) content increased significantly, whereas rapidly degraded true protein (PB₁), intermediately degraded true protein (PB₂), total carbohydrate (CHO), sugars (CA), starch (CB₁), and degradable cell wall carbohydrate (CB₂) content decreased during ensiling (p<0.05). At 30 d of ensiling, control and LAB-treated silages were well preserved and had lower pH (<4.2) and ammonia-N content (<0.4 g/kg of fresh matter [FM]) and higher lactic acid content (>1.0% of FM). During the aerobic stage, CP, extract ether, WSC, lactic acid, acetic acid, PB₁, PB₂, true protein degraded slowly (PB₃), CHO, CA, CB₁, and CB₂ content decreased significantly in all silages, whereas pH, ammonia-N, PA, and bound true protein (PC) content increased significantly. Conclusion: Control and LAB-treated silages produced similar results in terms of fermentation quality, aerobic stability, and protein and carbohydrate fractions. Inner Mongolian native grass produced good silage, nutrients were preserved during ensiling and protein and carbohydrate losses largely occurred during the aerobic stage.

• Journal of Animal Science and Technology
• /
• v.65 no.1
• /
• pp.244-257
• /
• 2023

The study aimed to investigate the effect of low-frequency oscillations on the cow udder, milk parameters, and animal welfare during the automated milking process. The study's objective was to investigate the impact of low-frequency oscillations on the udder and teats' blood circulation by creating a mathematical model of mammary glands, using milkers and vibrators to analyze the theoretical dynamics of oscillations. The mechanical vibration device developed and tested in the study was mounted on a DeLaval automatic milking machine, which excited the udder with low-frequency oscillations, allowing the analysis of input parameters (temperature, oscillation amplitude) and using feedback data, changing the device parameters such as vibration frequency and duration. The experimental study was performed using an artificial cow's udder model with and without milk and a DeLaval milking machine, exciting the model with low-frequency harmonic oscillations (frequency range 15-60 Hz, vibration amplitude 2-5 mm). The investigation in vitro applying low-frequency of the vibration system's first-order frequencies in lateral (X) direction showed the low-frequency values of 23.5-26.5 Hz (effective frequency of the simulation analysis was 25.0 Hz). The tested values of the first-order frequency of the vibration system in the vertical (Y) direction were 37.5-41.5 Hz (effective frequency of the simulation analysis was 41.0 Hz), with higher amplitude and lower vibration damping. During in vivo experiments, while milking, the vibrator was inducing mechanical milking-similar vibrations in the udder. The vibrations were spreading to the entire udder and caused physiotherapeutic effects such as activated physiological processes and increased udder base temperature by 0.57℃ (p < 0.001), thus increasing blood flow in the udder. Used low-frequency vibrations did not significantly affect milk yield, milk composition, milk quality indicators, and animal welfare. The investigation results showed that applying low-frequency vibration on a cow udder during automatic milking is a non-invasive, efficient method to stimulate blood circulation in the udder and improve teat and udder health without changing milk quality and production. Further studies will be carried out in the following research phase on clinical and subclinical mastitis cows.

• Journal of KSNVE
• /
• v.7 no.1
• /
• pp.6-12
• /
• 1997

물리계에서 일어나는 동적 현상들은 선형해석 만으로 설명하기에는 불충분한 점이 많이 있다. 이는 기계구조물과 같은 실제 계의 진동이 기하학적 비선형성, 강성 의 비선형성 또는 경계조건의 비선형성 등의 영향으로 비선형적인 거동을 하기 때문 이다. 비선형 진동을 하는 기계 계는 우리 주변에서 쉽게 찾아 볼 수 있는데, 그 예로써 진자운동을 포함하여 동흡진기, 회전체계, 공작기계의 절삭운동, 건마찰 (dry friction) 관련 기계장치, 치차 및 기차의 바퀴와 레일 간의 접촉에서 볼수 있는 구분적 선형(piecewise linear) 진동계, 충격 진동계 등을 들 수 있다. 비선형 진동 연구는 limit cycle, 준주기운동(quasiperiodic motion), 점프현상(jump phenomena) 등의 인식에서 시작되어, 과거에는 설명이 안되어 회피되 왔던 랜덤(random) 형태의 비주기운동에 대한 연구로 까지 발전하고 있다. 비선형 진동을 다루는데 있어서 정규모드(normal mode)를 이용하는 방법이 있다. 일반적으로 선형계는 선형 정규모드 (linear normal mode)가 존재하는 것과 같이 비선형계에도 이와 유사한 정규모드가 존재한다는 사실이 연구 보고된 바 있다. 비선형계에 존재하는 정규모드는 계의 매개 변수(system parameters)에 따라 그 안정성이 바뀔 수 있으며, 만일 안정한 정규모드 가 어떤 매개변수에서 그 안정성이 바뀐다면 선형이론으로는 설명될 수 없는 새로운 운동이 일어나고 이러한 운동을 분기모드(bifurcation mode)라고 한다. 안정한 정규 모드 및 분기모드를 포함하여 비선형계를 다류는 것을 "정규모드 동역학(normal mode dynamics)"이라고 한다. 정규모드 동역학은 앞에서 언급된 비선형 현상들의 원인규명, 예측, 안정성해석 및 강제진동 해석을 가능하게 한다. 또한 최근에 활발히 연구되고 있는 혼돈운동(chaotic motion)의 해석도 가능하다. 이 글에서는 비선형 진동해석을 위한 정규모드 동역학에 대한 연구동향 및 기본 이론을 살펴 보았고, 그 적용 예를 통하여 실험결과와 비교 고찰 함으로써 정규모드 동역학의 적용성을 서술하여 보았다. 선형이론으로 이해하기 어려운 현상들에 대하여는 비선형의 관점에서 새롭게 접근하 려는 노력이 필요하며 비선형 이론에 대한 연구가 지속적으로 진행되어야 한다. 진행되어야 한다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.4
• /
• pp.58-66
• /
• 1999

The flow characteristics of supersonic ejectors is often subject to compressibility, unsteadiness and shock wave systems. The numerical works carried out thus far have been of one-dimensional analyses or some Computational Fluid Dynamics(CFD) which has been applied to only a very simplified configuration. For the design of effective ejector-pump systems the effects of secondary mass flow on the supersonic ejector flow should be fully understood. In the present work the supersonic ejector-pump flows with a secondary mass flow were simulated using CFD. A fully implicit finite volume scheme was applied to axisymmetric compressible Navier-Stokes equations. The standard two-equation turbulence model was employed to predict turbulent stresses. The results obtained showed that the flow characteristics of constant area mixing tube types were nearly independent of the secondary flow rate, but the flow fields of ejector system with the second-throat were strongly dependent on the secondary flow rate due to the effect of the back pressure near the primary nozzle exit.

• The KSFM Journal of Fluid Machinery
• /
• v.19 no.4
• /
• pp.48-53
• /
• 2016

The centrifugal separator which uses gravity separation method for oil-water separation, rotating at high-speed, is one of the most commonly used device for controlling the amount of the oil in waste water collected in bilge. The IMO (International Maritime Organization) has set regulations, also known as MARPOL 73/78, for the prevention of marine pollution. In addition, DET NORSKE VERITAS (DNV) has set standards regarding the assignment of Environmental Class Notation, CLEAN or CLEAN DESIGN, of ships. One of the requirements for classification is that in addition to conforming to MARPOL 73/78, more stringent measures must be taken as well. One of these measures is to limit the oil concentration in bilge water to less than 5ppm. So in this study, an Oil-Water Separator (OWS) is used together with multiple separating plates as a filtration system to be used as an oil-water separation device. The OWS operates using centrifugal separation in which the mixture is separated by centrifugal forces. The main purpose of this paper is to present the OWS separation efficiency according to the rotation speed, mass-flow rate, the angle and the number of stacked layers of the laminated plate using Computational Fluid Dynamics (CFD). Improvements to the device will be investigated from these results.

• Journal of Internet Computing and Services
• /
• v.20 no.6
• /
• pp.85-93
• /
• 2019

Computational Science and Engineering is a convergence study that understands and solves complex problems such as science, engineering, and social phenomena through modeling using computing resources. Computational science and engineering combines algorithms, computational and informatics, and infrastructure. The importance of computational science is increasing with the improvement of computer performance and the development of large data processing technology. In Korea, Korea Institute of Science and Technology Information (KISTI) has been developing national computational science engineering software and utilization technology by combining basic science and computing technology through EDISON project. The EDISON project builds an open EDISON platform and integrates and services information systems in seven areas of computational science and engineering (computational thermal fluids, nanophysics, computational chemistry, structural dynamics, computational design, and computational medicine). Using this, we have established a web-based curriculum to lay the groundwork for fostering scientific talent and commercializing computational science and engineering software. The purpose of this study is to derive the quality characteristic factors of computational science platform and to empirically examine the effect on user satisfaction. This paper examines how the quality characteristics of information systems, the computational science engineering platform, affect the user satisfaction by modifying the research questions according to the propensity of the computational science platform by referring to the success factors of DeLone and McLean's information system. Based on the results of this study, we will suggest strategic implications for platform improvement by searching the priority of quality characteristics of computational science platform.

• Korean Journal of Agricultural Science
• /
• v.51 no.3
• /
• pp.315-329
• /
• 2024

This study was conducted for simulation model development of an electric all-wheel-drive vehicle to adapt the agricultural machinery. Data measurement system was installed on a four-wheel electric driven vehicle using proximity sensor, torque-meter, global positioning system (GPS) and data acquisition (DAQ) device. Axle torque and rotational speed were measured using a torque-meter and a proximity sensor. Driving test was performed on an upland field at a speed of 7 km·h^-1. Simulation model was developed using a multi-body dynamics software, and tire properties were measured and calculated to reflect the similar road conditions. Measured and simulated data were compared to validate the developed simulation model performance, and axle rotational speed was selected as simulation input data and axle torque and power were selected as simulation output data. As a result of driving performance, an average axle rotational speed was 115 rpm for each wheel. Average axle torque and power were 4.50, 4.21, 4.04, and 3.22 Nm and 53.42, 50.56, 47.34, and 38.07 W on front left, front right, rear left, and rear right wheel, respectively. As a result of simulation driving, average axle torque and power were 4.51, 3.9, 4.16, and 3.32 Nm and 55.79, 48.11, 51.62, and 41.2 W on front left, front right, rear left, and rear right wheel, respectively. Absolute error of axle torque was calculated as 0.22, 7.36, 2.97, and 3.11% on front left, front right, rear left, rear right wheel, respectively, and absolute error of axle power was calculated as 4.44, 4.85, 9.04, and 8.22% on front left, front right, rear left, and rear right wheel, respectively. As a result of absolute error, it was shown that developed simulation model can be used for driving performance prediction of electric driven vehicle. Only straight driving was considered in this study, and various road and driving conditions would be considered in future study.

• Journal of Navigation and Port Research
• /
• v.48 no.3
• /
• pp.181-191
• /
• 2024

Ports play a crucial role in the complex global supply chain. While many researchers have used social network analysis (SNA) to study active networks, there is a lack of SNA cohesion analysis specifically related to logistics and trade. Therefore, this study aims to identify time-series structural changes in all domestic import and export logistics networks, including regions, ports, and airports, by utilizing techniques such as k-core and community analysis. To carry out this analysis, we rely on data from the Korea Customs Service's Import and Export Logistics Statistical Yearbook spanning from 2004 to 2022. The findings from the k-core and community analysis indicate that the cohesion of the domestic import and export logistics network has continuously strengthened over time. Moreover, it reveals that regions, ports, and airports are becoming more cohesive and homogeneous, with Busan Port emerging as the central hub of a large community. These insights are expected to enhance our understanding of global logistics dynamics and contribute to the development of policies and sustainable import and export logistics processes.

• Journal of the Korean Geographical Society
• /
• v.47 no.5
• /
• pp.677-699
• /
• 2012

Climate changes may cause substantial changes in spatial patterns and distribution of vector-borne diseases (VBD's), which will result in a significant threat to humans and emerge as an important public health problem that the international society needs to solve. As global warming becomes widespread and the Korean peninsula characterizes subtropical climate, the potentials of climate-driven disease outbreaks and spread rapidly increase with changes in land use, population distributions, and ecological environments. Vector-borne diseases are typically infected by insects such as mosquitoes and ticks, and infected hosts and vectors increased dramatically as the habitat ranges of the VBD agents have been expanded for the past 20 years. Medical geography integrates and processes a wide range of public health data and indicators at both local and regional levels, and ultimately helps researchers identify spatiotemporal mechanism of the diseases determining interactions and relationships between spatial and non-spatial data. Spatial epidemiology is a new and emerging area of medical geography integrating geospatial sciences, environmental sciences, and epidemiology to further uncover human health-environment relationships. An introduction of GIS-based disease monitoring system to the public health surveillance system is among the important future research agenda that medical geography can significantly contribute to. Particularly, real-time monitoring methods, early-warning systems, and spatial forecasting of VBD factors will be key research fields to understand the dynamics of VBD's.