• Computers and Concrete
• /
• 제29권 5호
• /
• pp.335-346
• /
• 2022

Geopolymers are an important alternative material supporting recycling, sustainability, and waste management. Durability properties are among the most critical parameters to be investigated; in this study, the durability of manufactured geopolymer samples under the attack of 10% magnesium sulfate and 10% sodium sulfate solution was investigated. 180 cycles of freezing and thawing were also tested. The experimentally obtained results investigate the durability of geopolymer mortar prepared with fly ash (class F) and alkali activator. Three different quarry dust wastes replaced the river sand aggregate: limestone, marble, and basalt powder as fine filler aggregate in three different replacement ratios of 25%, 50%, and 75% to produce ten series of geopolymer composites. The geopolymer samples' visual appearance, weight changes, UPV, and strength properties were studied for up to 12 months at different time intervals of exposure to sulfate solutions to investigate sulfate resistance. In addition, Scanning Electron Microscopy (SEM), EDS, and XRD were used to study the microstructure of the samples. It was beneficial to include quarry waste as a filler aggregate in durability and mechanical properties. The compact matrix was demonstrated by microstructural analysis of the manufactured specimens. The geopolymer mortars immersed in sodium sulfate showed less strength reduction and deterioration than magnesium sulfate, indicating that magnesium sulfate is more aggressive than sodium sulfate. Therefore, it is concluded that using waste dust interrogation with partial replacement of river sand with fly ash-based geopolymers has satisfactory results in terms of durability properties of freeze-thaw and sulfate resistance.

• 대한수의학회지
• /
• 제5권1호
• /
• pp.1-16
• /
• 1965

I. A Comparison of Sodium Sulfate Precipitation and Zone(Paper, Agar) Electrophoresis; Many kinds of techniques have been used for fractionating serum proteins. In the present study, using bovine serum, the fractions obtained with sodium sulfate were compared with those determined by zone electrophoresis. 1. Fibrinogen was precipitated with 4 to 10 percent of sodium sulfate. 2. ${\gamma}$-globulin required 10 to 16 percent of the salt for precipitation. 3. ${\beta}$-globulin began to precipitate at 12 percent sodium sulfate, and completed precipitation at approximately 26 percent in paper electrophoresis, while at 22 percent in agar electrophoresis. 4. ${\alpha}$-globulin completed precipitation at 13 to 28 percent sodium sulfate in paper electrophoresis and at 22 percent in agar electrophoresis. 5. Albumin began to precipitate at 14 percent of the salt, and was free from the mixture of globulins approximately at 28 percent in paper electrophoresis, while at 22 percent in agar electrophoresis. The results of comparing fractions by the two methods were as follows: 1. Euglobulin (15%) was equal to the sum of the most ${\gamma}$-globulin and a small quantity of the ${\alpha}$-, and ${\beta}$-globulins. 2. Pseudoglobulin I (15-17.5%) corresponded to the most ${\alpha}$-, ${\beta}$-globulins and a small quantity of albumin. 3. Pseudoglobulin II(18-22%) was a mixture of the ${\alpha}$-, ${\beta}$-globulins and albumin fraction. 4. Albumin (above 22%) contained the most albumin fraction separated by zone electrophoresis and a small quantity of the ${\alpha}$-, and ${\beta}$-globulins. As mentioned above the fractions obtained with sodium sulfate were a mixture of the various proportion of the fractions determined by zone electrophoresis. The solubility of serum fractions to sodium sulfate coincided with the mobility of those by zone electrophoresis. (By percent of sodium sulfate we mean gram of sodium sulfate contained in $100m{\ell}$ of solution). II. Immunological Studies on Serum Protein Fractions with Sodium Sulfate; In the previous report the fractions of bovine serum protein with sodium sulfate compared with those obtained by zone electrophoresis, and the findings were that the former contained various proportion components of the latter. In this study the author studied whether or not the fractions with sodium sulfate are simple component antigenically by immunoelectrophoresis and micro double diffusion test (Immuno-precipitation), using rabbit antiserum to bovine serum. In immunoelectrophoresis, normal bovine serum developed with rabbit antibovine serum showed about ten distinct precipitin arcs. The distribution of these arcs was as follows: 1 albumin, 2 ${\alpha}_1$-, 3 ${\alpha}_2$-, 2 ${\beta}_1$-, ${\beta}_2$-, and 1 ${\gamma}$-globulin (Fig. 7, 9). In micro double diffusion test, five to six precipitation bands could be seen between antigens and antibody, the order of the precipitation bands location is albumin, ${\alpha}$-, ${\beta}$-, and ${\gamma}$-globulin from the side of antiserum well (Fig.19). Frequently the ${\alpha}$-, and ${\beta}$-precipitation bands were separated into two or three precipitation bands, which indicated that these globuline are not a pure component antigenically as shown in immuno-electrophoresis. In both Immunological methods, the two ${\alpha}$-, ${\beta}$-precipitin arcs and bands appeared clear and strong, indicating that the two globulins reacted as strong antigens. The precipitate reaction of ${\gamma}$-globulin was shown at 12 to 16 percent sodium sulfate; ${\beta}$-globulin at 12 to 20 percent; ${\alpha}$-globulin at 12 to 22 percent (immuno-electrophoresis), at 12 to 26 percent (Diffusion); and albumin at above 22 percent. Antigenically euglobulin contained ${\gamma}$-, ${\beta}$-, and ${\alpha}$-globulins, Pseudoglobulin I and Pseudoglobulin II were composed of ${\alpha}$-, and ${\beta}$-globulins, and albumin was a mixture of ${\alpha}$-globulin and albumin determined by zone electrophoresis. The results indicated that the fractions of serum protein obtained by either method were constituents of various proteins antigenically except ${\gamma}$-globulin and albumin by Zone electrophoresis.

• 자원리싸이클링
• /
• 제26권5호
• /
• pp.39-47
• /
• 2017

본 연구에서는 희토류 황산수용액으로부터 희토류 원소를 철로부터 분리/회수하고자, 황산나트륨을 이용한 희토류 황산복염 침전반응에 관하여 고찰하였다. 네오디뮴(Nd)은 황산나트륨과 결합하여 복염으로 침전이 용이하게 일어나는 반면에 디스프로슘(Dy)은 황산복염으로 침전되기 위해서 과량의 황산나트륨이 필요하였다. 또한 황산수용액에서 네오디뮴의 존재는 디스프로슘 황산복염 침전을 촉진시켜서 디스프로슘 황산복염 침전률을 증가시켰다. 본 연구에서 사용된 네오디뮴 함량 23.39 mg/ml, 디스프로슘 함량 8.67 mg/ml인 황산수용액으로부터 반응온도 $60^{\circ}C$, 반응 3시간에서 황산나트륨을 7 당량 첨가하였을 때, 네오디뮴 복염 침전률은 99.7%, 디스프로슘 복염 침전률은 94.3%이었다. 또한 네오디뮴과 디스프로슘의 황산복염 침전특성을 이용한 두 원소의 분리 가능성을 고찰한 결과, 염화나트륨 첨가에 의한 염석효과가 디스프로슘 품위 증가에 중요한 역할을 하며 본 연구조건에서 최대 98.7% 품위의 디스프로슘을 얻을 수 있었다.

• Computers and Concrete
• /
• 제5권6호
• /
• pp.573-597
• /
• 2008

Among artificial intelligence-based computational techniques, adaptive neuro-fuzzy inference systems (ANFIS) are particularly suitable for modelling complex systems with known input-output data sets. Such systems can be efficient in modelling non-linear, complex and ambiguous behaviour of cement-based materials undergoing single, dual or multiple damage factors of different forms (chemical, physical and structural). Due to the well-known complexity of sulfate attack on cement-based materials, the current work investigates the use of ANFIS to model the behaviour of a wide range of self-consolidating concrete (SCC) mixture designs under various high-concentration sodium sulfate exposure regimes including full immersion, wetting-drying, partial immersion, freezing-thawing, and cyclic cold-hot conditions with or without sustained flexural loading. Three ANFIS models have been developed to predict the expansion, reduction in elastic dynamic modulus, and starting time of failure of the tested SCC specimens under the various high-concentration sodium sulfate exposure regimes. A fuzzy inference system was also developed to predict the level of aggression of environmental conditions associated with very severe sodium sulfate attack based on temperature, relative humidity and degree of wetting-drying. The results show that predictions of the ANFIS and fuzzy inference systems were rational and accurate, with errors not exceeding 5%. Sensitivity analyses showed that the trends of results given by the models had good agreement with actual experimental results and with thermal, mineralogical and micro-analytical studies.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제36권4호
• /
• pp.280-285
• /
• 2010

Hemangioma and vascular malformation is a common vascular benign lesion in the head and neck region. The lesion is a congenital malformation observed in neonates. The treatment this lesion includes surgical excision, cryotherapy, selective embolization and treatment with sclerotic agents. We present three cases of benign oral vascular lesions treated with an intralesional injection of sodium tetradecyl sulfate. The lesions virtually disappeared after three sessions of sclerotherapy, leaving an inconspicuous scar. No side effects were observed. Sclerotherapy with sodium tetradecyl sulfate is effective in treating benign oral vascular lesions, and the use of the sodium tetradecyl sulfate provides alternative or support for surgical methods.

• 미생물학회지
• /
• 제27권4호
• /
• pp.436-438
• /
• 1989

We propose a method for rapid evaluation and permanent record of sodium dodecyl sulfate polyacrylamide gel electrophoretic runs. This method is based on the photocopy process, rather than on photography and requires no extensive or expensive investment. Comparison of a print obtained through this method and a 35mm photography indicated, on a balanced gel, equal sensitivity.

• 대한화학회지
• /
• 제38권12호
• /
• pp.857-863
• /
• 1994

Sodium dodecyl sulfate (SDS) 존재하에서 유기색소인 thionine (TH)의 흡수 및 형광분광학적 성질을 조사 연구하였다. SDS 농도 증가에 따라 측정한 흡수 및 형광스펙트럼의 변화들로부터 i) TH-SDS 착화합물의 회합체 형성, ii)TH-SDS 회합체내의 색소분자의 stacking 과정, iii)dye-rich induced micelles의 형성에 의한 staking의 파괴 및 iv) SDS 미셀의 표면에 TH의 재분포과정 등으로 설명하였다.

• International Journal of Concrete Structures and Materials
• /
• 제4권1호
• /
• pp.55-62
• /
• 2010

The performance evaluation of a sodium lauryl sulfate to qualify as a foaming agent is presented in this paper. When new surfactants are used a systematic study of production parameters on the foam characteristics needs to be undertaken unlike proprietary foaming agents and foam generator for which manufacturer has predefined the parameters. The relative influence of the foam parameters and optimization of factors were carried out through a systematic experiment design. The foam production parameters namely foam generation pressure and dilution ratio of foaming agents are observed to have significant effect on all foam characteristics with the exception of foam output rate on which only foam generation pressure has influence. The foam with good initial foam density need not necessarily be stable foam. The optimum levels of foam production parameters are determined for the surfactant Sodium lauryl sulfate which can be used to produce stable foam for foam concrete production.

• 한국세라믹학회지
• /
• 제42권5호
• /
• pp.338-345
• /
• 2005

To prepare the complex gel of flux and pseudo-boehmite used in precursor of the flaky ${\alpha}-A1_2O_3$ crystal, aqueous solution of the mixture of sodium carbonate and sodium phosphate was added with stirring in aqueous solution of the mixture of sodium sulfate, potassium sulfate and titanium sulfate. The complex gel was dried at $110^{\circ}C$ and was crystallized above $1,050^{\circ}C$, and then the effect of the amount of titanium sulfate on size, morphology, thickness and crystal size distribution of the flaky ${\alpha}-A1_2O_3$ crystal was investigated. Addition of titanium sulfate was prevented the aggregation and generation of twin crystal, and had an effect on the crystal size and the thickness during crystal growth. When the amount of titanium sulfate was more than 6 g, particle size was decreased but was free from crystal twining and aggregation. On the other hand, when the amount of titanium sulfate was lower than 6 g, crystal size was increased but crystal twinning and aggregation were noticed.

• 대한토목학회논문집
• /
• 제28권5A호
• /
• pp.757-764
• /
• 2008

본 연구는 농도조건을 달리한 시험용액에 침지한 모르타르의 내구성을 평가하기 위하여 수행되었다. 3종류 시멘트 모르타르를 제조한 후, ${SO_4}^{2-}$ 이온의 농도가 4225, 8450, 16900 및 33800 ppm인 4종류 황산나트륨 용액에 540일간 침지하였으며, 침지재령별 압축강도 및 선형팽창을 측정하므로써 모르타르의 황산염침식 저항성을 실험적으로 평가하였다. 실험결과에 의하면, 고농도 황산나트륨 용액에 침지한 모르타르 공시체가 가장 심한 성능저하 현상을 나타내었다. 특히, 고농도 환경에서 모르타르의 팽창 특성은 사용된 시멘트의 $C_3A$량과 직접적인 관련이 있었으며, GGBS를 대체한 SGC 모르타르는 조직구조의 투수성이 상대적으로 낮은 탓으로 인하여 시험용액의 농도조건에 관계없이 우수한 황산염침식 저항성을 나타내었다.