• Journal of the Korea Computer Industry Society
• /
• v.7 no.3
• /
• pp.145-154
• /
• 2006

This paper improves algorithms of Speculative Partial Redundancy Elimination(SPRE) proposed by Knoop et al. Improving SPRE algorithm performs the execution speed optimization based on the information of the execution frequency from profiling and the memory space optimization. The first purpose of presented algorithm is to reduce in space requirements and the second purpose is to de crease the execution time. Since too much weight on execution speed optimization may cause the explosion of the memory space, it is important to consider the size of memory. This fact can be a big advantage in the embedded system which concerns the required memory size more than the execution speed In this paper we implemented the min-cut algorithm, and this algorithm used the control flow graph is constructed with network and partitioned.

• Nuclear Engineering and Technology
• /
• v.51 no.2
• /
• pp.588-599
• /
• 2019

This research presents a structural design of high-level waste (HLW) container using ultra-high performance fiber reinforced concrete (UHP-FRC) material. The proposed design aims to overcome the drawbacks of the existing concrete containers which are heavy, difficult to fabricate, and expensive. In this study, the dry storage container (DSC) that commonly used at Canadian Nuclear facilities is selected to present the proposed design. The design has been performed such that the new UHP-FRC alternative has a structural stiffness equivalent to the existing steel-concrete-steel container under various loading scenarios. Size optimization technique is used with the aim of maximizing stiffness, and minimizing the cost while satisfying both the design stresses and construction requirements. Then, the integrity of the new design has been evaluated against accidental drop-impact events based on realistic drop scenarios. The optimization results showed: the stiffness of the UHP-FRC container (300 mm wall thick) is being in the range of 1.35-1.75 times the stiffness of existing DSC (550 mm wall thick). The use of UHP-FRC leads to decrease the container weight by more than 60%. The UHP-FRC container showed a significant enhancement in performance in comparison to the existing DSC design under considered accidental drop impact scenarios.

• Electrical & Electronic Materials
• /
• v.8 no.2
• /
• pp.204-210
• /
• 1995

The characteristics of the internal circuits and the load capacitance should be included to optimize the size of BiCMOS buffer. In order to get the optimum size and delay time of the BiCMOS buffer, new size plane is suggested. By using the size plane, the optimum characteristics of CMOS buffer according to the number of stages can be obtained. From this method, delaytime, .tau.$_{D}$, is obtained 2.39 nsec with $V_{\var}$=5V, $C_{L}$=5pF, W=30.mu.m and $A_{e}$=135.mu. $m^{2}$.>..>...>.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.159-160
• /
• 2015

Recently, it is increased to use the portable device with small size. It is also increasing for demand of a small size adapter. To reduce the size of components, switching frequency has to be increased. But it causes higher switching loss and temperature of components. Especially, the temperature of adapter must be limited because adapter can be easily touched when portable device is being charged. To reduce temperature of adapter, high efficiency is essential. To solve this problem, this paper proposes design of resonance frequency optimization for LLC converter with high efficiency and low temperature of passive components.

• Journal of the Korean Ceramic Society
• /
• v.47 no.5
• /
• pp.365-372
• /
• 2010

This paper was to evaluate the influence of kiln process parameter(kiln angle, kiln rotating speed) of lightweight aggregate using waste glass and bottom ash with industrial by-products on thermal conductivity, density, water absorption, fracture load and porosity by response surface analysis. In the results of surface plot and contour plot, it has verified that kiln residence time of lightweight aggregate increase as kiln angle and rotating speed decreases. For this reason, pore size and quantity tend to increase by active reaction of forming agent. It seems to be that increase in pore size and quantity have caused decreasing density, fracture load and thermal conductivity, and increasing water absorption. In conclusion, optimization of kiln process parameter on thermal conductivity, density, water absorption, fracture load and porosity by response surface analysis are kiln angle 2.4646%, kiln rotating speed 40.7089 rpm.

• Journal of Mechanical Science and Technology
• /
• v.15 no.8
• /
• pp.1119-1131
• /
• 2001

In this paper we formulate an optimization based approach to determining the maximally inscribed rectangle in a robots workspace. The size and location of the maximally inscribed rectangle is an effective index for evaluating the size and quality of a robots workspace. Such information is useful for, e. g., optimal worktable placement, and the placement of cooperating robots. For general robot workspaces we show how the problem can be formulated as a constrained nonlinear optimization problem possessing a special structure, to which standard numerical algorithms can be applied. Key to the rapid convergence of these algorithms is the choice of a starting point; in this paper we develop an efficient computational geometric algorithm for rapidly obtaining an approximate solution suitable as an initial starting point. We also develop an improved version of the algorithm of Haug et al. for calculating a robots workspace boundary.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.3
• /
• pp.250-254
• /
• 2010

As the number of input and fuzzy set of a fuzzy system increase, the size of the rule base increases exponentially and becomes unmanageable (curse of dimensionality). In this paper, tree architectures of fuzzy controller (TAFC) is proposed to overcome the curse of dimensionality problem occurring in the design of fuzzy controller. TAFC is constructed with the aid of AND and OR fuzzy neurons. TAFC can guarantee reduced size of rule base with reasonable performance. For the development of TAFC, genetic algorithm constructs the binary tree structure by optimally selecting the nodes and leaves, and then random signal-based learning further refines the binary connections (two-step optimization). An inverted pendulum system is considered to verify the effectiveness of the proposed method by simulation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.5
• /
• pp.121-128
• /
• 2000

Simple design methods were developed to control the coolant flow rates through cylinder head gasket holes. Applying the concept of flow through an obstruction the ratio of intake to exhaust side flow rates could be easily controlled while maintaining the flow rates per cylinder of the original model. Flow distribution in the coolant passage of the original model was calculated by CFD and the flow rates at the gasket holes were modified based on the calculation results. The calculated flow rated of the modified gasket holes were reasonably close to target values. For more accurate control of the flow rate distribution, a design method with iterative CFD calculations was also suggested. The final size of gasket holes for the target flow rates were obtained just after a few optimization iterations. These methods can be very useful for the optimization of heat transfer characteristics in engine cylinder head and block.

• Journal of the Korea Society for Simulation
• /
• v.9 no.2
• /
• pp.89-102
• /
• 2000

In this paper, we consider an optimal allocation of constant service efforts in queueing network to maximize the system throughput. For this purpose, using the perturbation analysis, we apply a stochastic optimization algorithm to two types of queueing systems. Our simulation results indicate that the estimates obtained from a stochastic optimization algorithm for a two-tandem queuing network are very accurate, and those for closed loop manufacturing system are a little apart from the known optimal allocation. We find that as simulation time increases for obtaining a new gradient (performance measure with respect to decision variables) by perturbation algorithm, the estimates tend to be more stable. Thus, we consider that it would be more desirable to have more accurate sensitivity of performance measure by enlarging simulation time rather than more searching steps with less accurate sensitivity. We realize that more experiments on various types of systems are needed to identify such a relationship with regards to stopping rule, the size of moving step, and updating period for sensitivity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.547-550
• /
• 2003

In this paper we report the optimization method of the pattern size of the electrodes in PVA LCD for the transflective mode in order to improve the optical characteristics. Moreover, we designed the electrode of PVA LCD so as to remove the driving voltage difference between transmissive mode and reflective mode. As a result, we expect very simple manufacturing process and high optical performance even if complex process such as a multi cell gap process and multi driving method are not applied