• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.355-358
• /
• 2005

This study aims at comparing the noise characteristics of conventional and functional hood. Measurement and analysis was carried out in anechoic room and actual environment. In case of anechoic room, intensity and sound pressure level were measured. In case of actual environment sound pressure level under different apartment size and distances. Sound pressure level of actual environment was higher than that of anechoic room. It is concluded that noise characteristics were different from each other in case of anechoic room and actual environment.

• 한국유체기계학회 논문집
• /
• 제8권2호
• /
• pp.9-15
• /
• 2005

This paper presents an experimental and numerical study on the overall performance and local flow characteristics of sirocco fan in a range hood. Measurement of overall performance for sirocco fans were conducted based on AMCA standard 210. The effects of flow blockages due to the motor inside the fan on the fan performance were investigated by experimentally and numerically and the results were compared with each other. The numerical and experimental results show the inlet flow blockage reduces the performance (ie. fan static pressure, design flow rate, maximum efficiency and free delivery flow rate) of fan. It is found that the blockage makes the flow field highly non-uniform through the blade and cause the efficiency decrement.

• 조명전기설비학회논문지
• /
• 제27권1호
• /
• pp.24-34
• /
• 2013

This paper introduces the study of hood-type wind turbine embedded on highway median strip. Recently, many studies are being made to apply to small wind turbine in city. This study is wind turbine producing electricity generated from the wind by running cars. In order to analyze wind generated by running cars, we measured experiments using running cars and buses. Also, using CFD and interpreter program, we analysis wind turbines performance and applied to the twist-sabonius blade. This wind turbine attached to safety lamp on the road is produced to use electricity generated through the wind tunnel experiment. In this paper results, this wind turbine system is expected to produce the power source installed the heat ray and safety lamps on the road.

• 한국소음진동공학회논문집
• /
• 제26권1호
• /
• pp.63-68
• /
• 2016

This research investigates the deployment time of an active hood lift system(AHLS) activated a gunpowder actuator for the passenger vehicle. The deployment time of the system is investigated by changing the principal design parameters of the system. In order to achieve this goal, after introducing the geometric structure and operating principle of the AHLS, the dynamic equations of the system are formulated for deploying motion. Subsequently, using the dynamic equations, the deployment time of the system is determined by changing several geometric design parameters such as location of actuator. It is then identified which design parameters are main factors to affect the deployment time of AHLS.

• International Journal of Aerospace System Engineering
• /
• 제3권1호
• /
• pp.21-24
• /
• 2016

In this study, a optimal design on the hood automotive using eco-friendly natural fiber composites is performed. The hood of an automobile is determined by dividing the Inner panel shape through optimization phase to outer panel and inner panel. It was performed to optimize the size of the thickness of the inner panel and the outer panel by applying a flax/epoxy composite materials. The optimized shape was evaluated for weight-lightening, stability and the pedestrian collision safety. Through the resin flow analysis are confirmed to molding possibility judgment of product.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.63-68
• /
• 2005

In the present paper, the study on the optimal horizontal air jet velocity of a range hood system has been studied by three dimensional numerical simulation. It has been shown that the air jet of a range flood system generates coanda effect confining the contaminated (high temperature) air in a certain region while the jet pushes out more contaminated air into a room as the jet velocity increases. Therefore, the optimal jet velocity has been determined by the combination of the two mechanism.

• 한국입자에어로졸학회지
• /
• 제7권3호
• /
• pp.71-77
• /
• 2011

Pork belly meat and mackerel are popular meals in Korea. Although a lot of people enjoy cooking these food, there have been some reports that generated organic particles during cooking could be thereas on of lung cancer of nonsmoking housewives. In addition, some experiments show that carcinogens may be included in meat and fishes which we eat usually. For this reason, particle size and concentration in formation during cooking are necessary to figure out the relationship between particles and the diseases. Thus, we identify number concentrations and size distributions of generated nano aerosol in cooking with respect to time, hood operation, and distance between cooking and measurement locations. The maximum concentrations of nano aerosol(diameter sizes are between 10 to 700nm)are decreased after the cooking from $8{\times}10^6{\sharp}/cm^3$ to zeroth order in pork belly meat cooking, and from $3.5{\times}{\times}10^6{\sharp}/cm^3$ to zeroth order in mackerel cooking respectively. When it comes to hood operation during cooking, the detected concentrations of generated aerosols are decreased as in taking flow rate of the hood increases. In cooking pork belly meat, the reduced amount of concentration is about $3{\times}10^6{\sharp}/cm^3$ compared to no hood operation, when hood in taking flow rate is $610m^3/hr$ In mackerel cooking, reduced concentration is $6{\times}10^5{\sharp}/cm^3$ in the same condition. Also, Naphthalene and Fluorene, which are known as polycyclic aromatic hydrocarbons (PAHs), are detected in the generated aerosols during cooking.

• 한국전산구조공학회논문집
• /
• 제19권2호
• /
• pp.195-202
• /
• 2006

박판 구조물은 자동차를 비롯하여 항공기, 인공위성, 선박 등의 운송 수단과 건축물의 돔과 같이 효율적으로 활용되어지고 있으며 동시에 경량화를 필요로 하는 경우 널리 사용되는 구조물이다. 엔진, 변속기 등의 회전체의 부품을 보호하는 박판 구조물인 자동차 후드에서의 새로운 보강재 형상을 제시하였다. 자동차 후드는 엔진 룸에 장착되어 있는 회전체의 진동 영향을 민감하게 받아 공진현상이 발생할 우려가 있다. 따라서 설계하중을 지지할 강성을 가지며 동적 특성이 고려되어야 한다. 즉, 강성을 유지하면서 공진에 의한 진동도 고려해야 한다. 이는 곧 승차감과 직결된 중요한 문제이다. 그러므로 최적의 강성증대 설계결과를 얻기 위해서는 정적 동적 강성평가와 함께 고유진동수를 고려한 보강재의 최적설계가 도입되어야 한다. 본 연구에서는 고유진동수를 고려한 대표적인 박판 구조물인 자동차 후드의 보강재 위상을 구하고, 도출된 위상에서 보강재의 형상 최적 설계 후 제시된 보강재 단면의 최적 치수를 다구찌 방법을 이용한 직교 배열표상에서의 각 설계변수의 수준과 최적의 설계변수의 조건으로 구하였다.

• 한국주거학회논문집
• /
• 제15권3호
• /
• pp.101-108
• /
• 2004

To find more efficient exhaust effect, air curtain of upward or downward trend in gas table and left or right side of range hood were made. As result that film vapor from range hood lower part by digital camera, the air current change by moving existence and nonexistence of exhaust fan and direction of air curtain were known. Under all experiment condition, upward air curtain superior exhaust performance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.186-187
• /
• 2013